AMLogic Category - Page 7 of 95 - CNX Software

November 8, 2022November 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 48 Comments

ODROID-N2L is a smaller, low-cost variant of ODROID-N2+ Arm SBC

ODROID-N2L SBC is a smaller and cheaper version of the ODROID-N2+ single board computer powered by an Amlogic S922X hexa-core Cortex-A73/A53 processor and offered with 2GB or 4GB single-chip LPDDR4X memory. While the ODROID-N2+ is the most popular board from Hardkernel, it’s also fairly larger than most hobbyist SBCs on the market, and following requests from customers, the company designed the ODROID-N2L with a compact form factor that is smaller than Raspberry Pi Model B SBCs and sold at a lower price at the cost of missing some of the features of its big brother. ODROID-N2L specifications: SoC – Amlogic S922X hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 2,208/2,400 MHz, 2x Arm Cortex A53 cores @ 1,908/2,016GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB LPDDR4 @ 3216 MT/s Storage – eMMC flash module socket up to 128GB, microSD […]

October 7, 2022October 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

ODROID-Go Ultra Amlogic S922X portable gaming console and devkit launched for $111

Hardkernel ODROID-Go Ultra (OGU) portable gaming console and devkit is powered by the same Amlogic S922X hexa-core Cortex-A73/A53 processor found in the company’s ODROID-N2+ SBC. The new model also adds a 16GB eMMC flash for faster storage and increases the RAM capacity to 2GB. The Korean company’s adventure with portable gaming consoles started with the ESP32-based ODROID-Go to celebrate its 10th birthday in 2018. At the time it looked like a side project, but the console was popular enough that they released their first Linux handheld game console with the ODROID-Go Advance (OGA) in 2019, and then the ODROID-Go Super (OGS) in 2020 with a larger 5-inch display, and both equipped with a Rockchip RK3326 quad-core Cortex-A35 processor. The new ODROID-Go Ultra is based on the same design as the OGS model, but with a serious jump in performance, and the ability to support more demanding emulators. ODROID-Go Ultra specifications: […]

October 3, 2022October 3, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linux 6.0 release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 6.0 has just been released by Linus Torvalds: So, as is hopefully clear to everybody, the major version number change is more about me running out of fingers and toes than it is about any big fundamental changes. But of course there’s a lot of various changes in 6.0 – we’ve got over 15k non-merge commits in there in total, after all, and as such 6.0 is one of the bigger releases at least in numbers of commits in a while. The shortlog of changes below is only the last week since 6.0-rc7. A little bit of everything, although the diffstat is dominated by drm (mostly amd new chip support) and networking drivers. And this obviously means that tomorrow I’ll open the merge window for 6.1. Which – unlike 6.0 – has a number of fairly core new things lined up. But for now, please do give this most […]

September 29, 2022September 29, 2022 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Amlogic POP1-G octa-core Cortex-A73/A53 processor shows up in Amazon Fire TV Cube 2022

Amazon has just launched the “all new” Fire TV Cube streaming device with an Amlogic POP1-G octa-core Cortex-A73/A53 processor that we never heard of, but that appears to be almost the same as the Amlogic A311D2 processor that we reviewed in Khadas VIM4 SBC. The Amlogic POP1-G (aka Amlogic – AML Popcorn) also integrates an Arm Mali-G52 MP8 GPU clocked at 800 MHz, and the third generation Fire TV Cube features 2GB LPDDR4/x memory, 16GB storage, WiFi 6E and Fast Ethernet, as well as an HDMI port. Fire TV Cube 2022 specifications: SoC – Amlogic POP1-G (Amlogic AML Popcorn) octa-core processor with four Cortex A73 cores @ 2.2 GHz, four Cortex-A53 cores @ 2.0 GHz, Arm Mali-G52 MP8 GPU @ 800MHz with OpenGL ES 3.2 support System Memory – 2GB, LPDDR4/x – 4224 MT/s Storage – 16GB eMMC flash Video 1x HDMI output port up to 4Kp60 with HDR (HDR10, […]

September 23, 2022September 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Chromecast with Google TV (HD) features Amlogic S805X2 CPU with AV1 video support

Google has launched the new Chromecast with Google TV (HD) powered by an Amlogic S805X2 quad-core Cortex-A35 CPU that offers a cheaper alternative to the Chromecast with Google TV (4K) that is limited to 1080p60 resolution, instead of the 4Kp60 video output supported by the Amlogic S905X3 model. While the processor is slower, the system comes with less memory (1.5GB vs 2GB), and only supports 1080p60, it supports the more efficient AV1 video decoding and as well as A/B partitions for seamless updates since the firmware does not need to be downloaded to the internal storage before the Chromecast with Google TV (HD) specifications: SoC – Amlogic S805X2 quad-core Cortex-A35 processor with Mali-G31 MP2 GPU, 1080p60 H.265, H.264, VP9, AV1 video decoder System Memory – 1.5GB RAM Storage – 8GB eMMC flash with support for “virtual A/B updates with compression“ Video output – HDMI up to 1080p60 with HDR support […]

September 20, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

JeVois-Pro ultra-compact deep learning camera gets 26 TOPS Hailo-8 AI accelerator

JeVois-Pro tiny AI camera was introduced last year with an Amlogic A311D processor with a built-in 5 TOPS NPU, and support for an Intel Myriad X or Google Edge TPU M.2 card all that in a compact 50x50x45 mm box. The company has now managed to get hold of some M.2 A+E 2230 Hailo-8 modules delivering up to 26 TOPS of AI performance and is selling for JeVois-Pro ultra-compact deep learning camera with the Hailo-8 accelerator for $599 delivering up to 31 TOPS once we include the built-in 5 TOPS NPU. I won’t go through the full specifications again, but in a nutshell, that’s a camera designed for robotics projects, powered by an Amlogic A311D hexa-core Cortex-A73/A53 processor with 4GB RAM, a microSD card socket for the OS and data, and a 2MP Sony IMX290 Starvis sensor. Since the system is quite compact and the AI accelerator fairly powerful, […]

September 20, 2022February 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Khadas Edge2 Pro review – A Rockchip RK3588S SBC tested with Ubuntu 22.04

We’ve had a sample of the Khadas Edge2 single board computer powered by Rockchip RK3588S octa-core Cortex-A76/A55 processor for a couple of weeks, and now that the board is officially launched we can post our review of the board with Ubuntu 22.04, and we’ll check out Android 12 later on. Khadas Edge2 Pro accessories The Khadas Edge2 comes in two variants: Basic and Pro, We received the Edge2 Pro SBC with 16GB RAM and 64GB flash that ships with two WiFi antennas by default, but the company also sent a low-profile fansink and thermal pad for cooling that in theory would be optional, but in practice, it is required as while the board runs fairly cool considering the performance it brings, it still needs a heatsink to prevent overheating and throttling. The fan may not really be necessary though as we’ll see below. I’d recommend installing the antennas before the […]

September 12, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Geniatech DB982 – An 8K TV motherboard with Amlogic T982 CPU, ATSC 3.0 TV tuner

Geniatech DB982 is a development board/motherboard powered by an Amlogic T982 quad-core Cortex-A55 processor designed for 8K televisions and equipped with an ATSC 3.0 TV tuner. The board ships with up to 4 GB RAM and up to 128 GB eMMC flash, and also includes three 4K HDMI inputs, LVDS and ultra-high-definition VX1 LCD screen interfaces, as well as Fast Ethernet and WiFI 5 connectivity. Geniatech DB982 specifications: SoC – Amlogic T982 CPU – Quad-core Arm Cortex-A55 processor up to 1.8GHz GPU – Arm Mali-G52 MP2 (2EE) GPU supporting OpenGL ES 3.2, Vulkan 1.1 and OpenCL 2.0 APIs AI accelerators – 2x NNA accelerators with INT8 inference performance up to 2.6 TOPS Manufacturing process – 12nm System Memory – 2GB (4GB optional) Storage – 16GB eMMC flash (8 to 128GB optional) Video Output 1x VX1 up to 8K resolution (CNXSoft: I suppose it stands for V-By-One interface) 1x 30-pin […]