AMLogic Category - Page 69 of 95 - CNX Software

November 6, 2015November 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 245 Comments

Giveaway Week – Eny M8S Android TV Box

Today, I’m going to give away Eny M8S, an Android media player based on Amlogic S812 processor with 2GB RAM and 8GB NAND flash that runs Android 4.4, and supports H.265 video playback up to 3840×2160 at 30 fps. How does the device perform? Well, I don’t really know because I postponed the review due to many problems including HDMI going on and off, lack of Google Play Store, some power issues, and eventually the box refused to boot. When I finally got a new firmware, I did upgrade it, but so many months had passed, that I postponed the review indefinitely… Having said that, I tested its 4K capabilities later on, and again before this giveaway to reset the box to factory settings, and it booted fine… The box is not abandoned, as the company released a new firmware at the beginning of this month, so the lucky winner […]

November 4, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.3 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.3 last week-end: So it *felt* like the last week of the rc series was busy, to the point where I got a bit worried about the release. But doing the actual numbers shows that that really was just my subjective feeling, probably due to the kernel summit and travel back home from Korea. It wasn’t actually a particularly busy week, it’s just that the pull requests were more noticeable in the last couple of days. We had a network update and a late fix for a x86 vm86 mode bug introduced by the vm86 cleanups, but other than that it’s just a collection of various small one-liners all over. Ok, the vm86 mode thing was a one-liner too, it was just slightly more nerve-wracking because it looked scarier than it was before people (Andy) figured out what was going on. The changes from rc7 […]

November 3, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 232 Comments

Giveaway Week – ARNU Box Mach Q Pure Linux Media Player

The second device for this giveaway week is ARNU Box Mach Q TV box that runs Kodi 15.2 on an Amlogic S805 quad core processor with 1GB RAM and 8GB flash, the little brother of ARNU Box Mach 10 powered by the more powerful Amlogic S812 processor. Due to lack of time I did not review ARNU Box Mach Q, but I did review ARNU Box Mach 10, which is loaded with a similar firmware based on Linux based EmBER OS. Video playback was very good with Kodi 15.2 with automatic frame rate switching support, working audio pass-through via S/PDIF, but HDMI audio pass-through did not work with my AV receiver. Since it’s the same firmware base, I fully expect the same good video experience on ARNU Box Mach Q minus support for 4K videos. You can find more pictures on ARNU Box Mach Q unboxing and teardown post. To […]

October 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

$47 Beelink MINI MX Android 5.1 TV Box Features Amlogic S905 Processor

It really feels like Christmas is around the corner, as deals on new and existing products keep on coming. About two weeks ago, I noted one of the first TV boxes based on Amlogic S905 processor, MXQ Pro, was starting (pre-)selling for as low as $48. Not bad for a device that is supporting HDMI 2.0 and 10-bit HEVC up to 4K @ 60 fps. Since then the price has gone up a little to $52 shipped, but Beelink MINI MX has started to up show up on a few sites, and the device is pre-sold for $46.89 on GearBest with GBMINIX coupon. The case is very similar to Allwinner H3 based Beelink X2, and the specifications similar to the ones for MXQ Pro: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – […]

October 27, 2015October 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Inphic SPOT i5 Android Media Player Costs only $25 (Promo)

If the trend continues, they’ll soon just giveaway TV boxes. After writing about Beelink X2 TV box selling for $31.99 shipped yesterday, I learned that Inphic is organizing a promotion for the launch of their cute Inphic SPOT i5 media player based on Amlogic S805 processor. While the regular price is $26 plus shipping, they’ll offer the first 100 samples for just $13 plus shipping starting at midnight on October 27 (GMT-8), which amounts to $24.22 to my location, and about $25.15 to the US. Inphic i5 specifications: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB NAND flash + micro SD slot up to 32GB Video & Audio Output – HDMI 1.b up to 1080p60 with CEC support Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek) USB – 1x micro USB OTG port Misc […]

October 19, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Review of WeTek Core Android Lollipop Media Player

EThe first devices based on Amlogic S812 processors started shipping by the end of 2014, but in the third quarter of 2015, there’s been a few new device released as some companies ported Android 5.x Lollipop to the platform. I reviewed two of these. Mygica ATV1900AC had potential but the number of bugs was disappointing, while Tronfy MXIV Telos was almost a disaster. Today, I’m going to report my test results with WeTek Core Android 5.1 TV box, also powered by Amlogic S812, more exactly S812-H, which includes DTS and Dolby licenses. I’ve already listed the specs, and torn down WeTek Core in two previous posts, so I’ll focus on the firmware in this review. Initial Setup and OTA Firmware Update First of all, I’d like to mention that I got an early WeTek Core sample, and while the hardware is frozen, the firmware is still being developed before the […]

October 16, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 60 Comments

$48 MXQ Pro TV Box Features Amlogic S905 Processor with Support for 4K, 10-bit HEVC Videos

Amlogic S905 is the only low cost SoC on the market that can offer a future proof TV Box with HDMI 2.0 output compliant with HDCP 2.2, 10-bit HEVC video playback up to 2160p60, and DTS & Dolby audio pass-through. I had also been told the SoC was cheap, going for $4.50 per unit in largish quantities, and now MXQ Pro, one of the first Amlogic S905 TV Box, is available for pre-order for just $55 on GeekBuying. MXQ Pro specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash + SD card slot Video Output – HDMI 2.0, AV Video Codec – 4K@60 Hz video decoding 10-bit HEVC and AVS+ codec support; H.264 up to 4K 30 Hz Audio – HDMI, AV, coaxial S/PDIF Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, Bluetooth […]

October 10, 2015March 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

WeTek Core 4K Media Player Unboxing and Teardown

WeTek Core is the latest media player from WeTek Electronics, based on Amlogic S812-H processor with 2GB RAM, and 8GB flash. By default, it will ship with Android 5.1 using DRM libraries enabling Netflix HD, but you’ll also be able to install OpenELEC, and later on Lubuntu once/if the community gets involved like for WeTek Play. The company sent me one sample, and I’ll start by checking out the device and internal hardware. WeTek Core Unboxing That’s the package which lists the specifications and provides links to WeTek Facebook page and forums. The box ships with a 12V/1A power adapter with clippable US, EU and UK plugs, an HDMI cable, WeTek’s IR and RF 6-axis remote control with voice search function, a small (and cool) tool for firmware updates, and a blue document showing the device’s ports. The power button and LED are located on one of the corners at […]