AMLogic Category - Page 65 of 95 - CNX Software

December 28, 2015December 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ODROID-C2 Amlogic S905 Development Board is in the Works

Hardkernel ODROID-C1 and later ODROID-C1+ boards, both based on Amlogic S805 SoC, have been a popular alternatives to Raspberry Pi 2 board this year. But now that Amlogic S905 quad core 64-bit ARM Cortex A53 processor has been available for a few months, people have been wondering whether the Korean company would launch an Amlogic S905 board, and it looks like ODROID-C2 might not be too far off based on firmware files on odroid.in website. The firmware includes a device tree file, which combined with other files give some clues about ODROID-C2 specifications: SoC – Amlogic S905 quad core Cortex A53 processor @ up to 2.0 GHz with penta-core (3+2) Mali-450MP GPU System Memory – 1GB RAM (in doc), 2GB RAM (in Device tree) Storage – 1x micro SD card Video Output – 1x HDMI out USB – 1x USB hub, 1x USB OTG I don’t have much more information […]

December 18, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

DietPi is Lightweight, Easy to Use Debian Based Distribution for Raspberry Pi, ODROID, and Orange Pi Boards

Raspberry Pi, Hardkernel ODROID, and Orange Pi are some of the most popular and cost effective development boards on the market today, and one British developer, going under Fourdee nickname, has released a lightweight distribution called DietPi working for all Rasbperry Pi boards, ODROID-C1(+), ODROID-XU3/XU4, and Orange Pi PC, with Orange Pi 2 and Orange Pi Plus support coming soon, as well as a VMWare virtual machine also available for evaluation. The compressed downloads are about 80 to 100MB depending on the target, the image that can be dump with dd or Win32DiskImager requires a 1GB or greater micro SD card as the image itself is about 500MB large, Internet access (Ethernet or Wifi), and optionally a USB Drive to allow installation on a USB drive for better performance, which of course does not apply if you have an eMMC module with your ODROID board. The image also contains some […]

December 17, 2015July 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Amlogic S905X and S912 Processors To Support 4K VP9, HDMI 2.0a, Built-in DAC and More

I had heard some news that Amlogic S912 was delayed, and even possibly canceled, while talks about a new S908 processor surfaced recently with support for VP9 up to 4K resolution. We now have some more details as I’ve received some more information about Amlogic product roadmap, and S908 should be renamed S905M [Update: The name will apparently be changed to S905X now, the saga continues…] Amlogic S905 Amlogic S908 / S905M / S905X Amlogic S912 CPU Quad core Cortex A53 @ up to 2.0 GHz Quad core Cortex A53 @ up to 1.5/2.0 GHz Octa core Cortex A53 @ up to 2.0 GHz GPU Penta-core Mali-450 up to 750 MHz High perf gaming GPU Memory 16/32-bit DDR3, LPDDR2/3 Up to 2GB, DDR2133 16/32-bit DDR3/4, LPDDR2/3 Up to 2GB, DDR2400 Storage NAND Flash@BCH60 eMMC 5.0, SD, Nor Flash Video Decoding 4Kp60 10-bit HEVC, 4Kp30 H.264 4Kp60 10-bit HEVC, VP9 4Kp30 […]

December 16, 2015December 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Unboxing and Teardown of Eny EM95 4K Android TV Box with Front Panel LCD Display

Eny EM95 was first unveiled in early July, as the flow of Android TV boxes based on Amlogic S905 started. Eny Technology has now sent me a sample of this device with the typical 1GB RAM and 8GB Flash, but it adds an LCD display on the front panel. Today, I’ll take a few photos of the device, and open it to find more details about the hardware. Eny EM95 TV Box Unboxing I received the device by DHL in a colorful retail package referring to EM95 as a Quad core Smart TV box, with some specs on the back, which I already listed in my first post. The media player ships with a 5V/2A power supply, an IR remote control with IR learning function requiring two AAA batteries, an HDMI cable, and a user’s manual in English. The style of the box it’s pretty neat, and I usually like […]

December 15, 2015December 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

How to Root Amlogic S905 based MINIX NEO U1 Box in Windows and Linux

MINIX NEO U1 is a great device, but if you have some apps that require root access, the firmware is not rooted by default. AndroidPC.es just posted instructions to root the device in Windows, and I’ve also adapted Daemonium’s batch script for Windows as a shell script in order root the device from Linux. Please note that this will break OTA firmware update, so you’ll have to upgrade firmware manually after rooting. The most steps are common between Linux and Windows Enable Developer options, by going to Settings->Advanced Settings->About Mediabox, and click 6 or 7 times in the Build number section, until the new menu is enabled. Go back once, and access Developer options to make sure USB debugging is enabled Now go to Settings->Network to check and note your IP address (WiFi or Ethernet) Download and extract AndroidPC.es_MINIX_NEO_U1_root_v01_Daemonium.zip They also asked to install WiFi adb in your system, but I […]

December 14, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

Review of MINIX NEO U1 Media Hub

We’ve already seen that MINIX NEO U1 has some impressive hardware to offer with a good thermal solution, and high-end chips for storage and WiFi, as well as some neats additions like RTC support. But obviously the most important is to find out how the box performs, so I’ve put it through it spaces with video playback and features testing, as well as some benchmarks. First Boot, OTA Firmware, Settings and First Impressions The device has three full-sized USB 2.0 ports, which become four once we had the provided USB OTG adapter to the remaining micro USB port. So I’ve connected a USB 3.0 hard drive, the RF dongle for NEO A2 Lite air mouse, a USB hub with a USB webcam, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad, as well as USB powered speakers to the micro USB port. After inserting HDMI, optical audio […]

December 11, 2015December 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ODROID-C0 Board is an Upcoming Alternative to Raspberry Pi Zero

When Raspberry Pi Zero launched at the end of November, it looked somewhat familiar to Hardkernel ODROID-W board that eventually had to be phased out as Broadcom would not sell Broadcom BCM2835 to the Korean company. In an interesting turn of events, Hardkernel has now shown the first prototype of ODROID-C0 (ODROID-C Zero), a tiny board based on Amlogic S805 found in ODROID-C1+. The name of the board may seem to be derived from Raspberry Pi Zero, but it’s not quite the case as Hardkernel first revealed their plans for ODROID-C0 back in November, a week before R-Pi Zero board was unveiled. ODROID-C0 will have similar specifications to ODROID-C1+ minus Ethernet, and the USB ports in order to reduce the PCB size: SoC – Amlogic S805 quad core Cortex-A5 processor with a Mali-450MP2 GPU System Memory – 1GB DDR3 Storage – eMMC module socket, and micro SD slot Video & […]

December 11, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Probox2 Z 4K Android TV Box Includes Remote+ with Air Mouse, Gamepad, and Audio Functions

Probox2 Z is yet another of these Amlogic S905 TV boxes with 8GB flash and 1GB RAM, but last year when I reviewed Probox2 EX, I was very pleased with the device, except for gaming due to throttling issues, so it might be worth having look at their new model. I also tested Remote+ air controller last year, which includes air mouse, voice search, and gamepad functions into a single remote, and it’s optionally included with Probox2 Z. Probox2 Z specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI 2.0 with HDMI CEC support Audio – HDMI, optical S/PDIF Connectivity – 10/100/1000M Ethernet, 802.11 b/g/n Wi-Fi, Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – Power button, IR receiver […]