AMLogic Category - Page 64 of 95 - CNX Software

January 30, 2016March 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Mini Review of G9C Android Media Player

Shenzhen Tomato sent me their G9C Android TV box at the beginning of December, but as Google Play was not working reliably in the first firmware, I decided to delay the review a little, and the company has provided a new working firmware a few weeks ago, and I’ve now taken the time to test some the main issues I normally find on Amlogic S905 Android TV box. I’ve also ready shown pictures of the device and the board, so today, I’ll only report my experience with the firmware. First Boot and First Impressions I’ve connected all necessary cables, and several USB devices include an harddrive and RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad. The device started automatically upon connecting the power, and on average the boot takes between 25 to 30 seconds. Not bad at all for an entry-level device. The launcher […]

January 29, 2016March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Amlogic S905 vs S812 Benchmarks Comparison

After seeing benchmarks comparisons between Amlogic S905 and S805, as well as Amlogic S905 vs Rockchip RK3368, several people asked me to compare the older Amlogic S812 32-bit processor to the newer Amlogic S905 64-bit processor, so I’ve gone ahead and compared the results for several benchmarks obtained with WeTek Core and K1 Plus Android 5.1 TV boxes, respectively powered by Amlogic S812 and Amlogic S905. A ratio greater than one means Amlogic S812 is the fastest, and I’ve highlighted the ratio with red or green colors so that red color is a plus for S905, and green color means S812 achieved a better result. Amlogic S905 Amlogic S812 Ratio CPU Quad core Cortex A53 @ 2.02 GHz Quad core Cortex A9 @ 1.99 GHz GPU Penta-core ARM Mali-450MP Octa-core ARM Mali-450MP Antutu 5.x Overall 28,027 33,953 1.21 Multitask 4,260 4,701 1.10 Runtime 2,721 3,383 1.24 RAM Ops 1,960 2,228 […]

January 12, 2016September 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S905X Processor Specifications

[Update September 2016: Removed Video Input Unit and Gigabit Ethernet MAC, since the latest documents have removed them] A few weeks ago, I wrote about the upcoming Amlogic S905M quad core Cortex A53 processor support 4K VP9 and 10-bit HEVC, but the silicon manufacturer seems to struggle with sticking with a name, as after the initial S908 part, they moved to S905M, before hopefully settling on Amlogic S905X, for which I received more information include a block diagram, and more detailed specifications. These are most of the specifications currently available for Amlogic S905X processor with highlights in bold: CPU Sub-system – Quad core ARM Cortex-A53 CPU up to 1.5GHz (DVFS) with Neon and Crypto extensions 3D Graphics Processing Unit – Penta-core ARM Mali-450 GPU up to 750MHz+ (DVFS) with two geometry/vertex processors, three pixel processors supporting OpenGL ES 1.1/2.0 and OpenVG 1.1. 2.5D Graphics Processor – Fast bitblt engine with […]

January 9, 2016January 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

WeTek Play+ Amlogic S905 Android Set-Top Box Features a Tuner with a SmartCard Reader and an mSATA SSD Bay

When WeTek announced the WeTek Core, some people were disappointed that they did not include a tuner like in the original WeTek Play, but the company has been working on a successor called Wetek Play+ that is based on Amlogic S905-H quad core processor and supports DVB-S/S2, DVB-C/T/T2, ISDB-T and ATSC tuners with a smartcard reader, as well as an extra store with an half-size SSD slot. WeTek Play+ specifications: SoC – Amlogic S905-H (Revision C) quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2 GB DDR3 Storage – 16 GB eMMC 5.0 flash + micro SD card slot + mSATA SSD socket (implemented via USB to SATA) Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and AV port Audio – HDMI, AV (stereo), optical S/PDIF Tuners – Support for DVB-S2, DVB-C/T/T2, ISDB-T and […]

January 8, 2016August 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 138 Comments

Specs, Unboxing and Teardown of KI Plus Android TV Box with DVB-T2/S2 Combo Tuner

If you’ve been following this blog, you must now that I reviewed K1 Plus Android TV box based on Amlogic S905 processor a little while ago. Videostrong has sent me yet another K1 Plus device, except this time it is an Android receiver with a tuner card supporting both satellite (DVB-S/S2) and terrestrial (DVB-T/T2) reception. Today, I’ll list the specs, take a few pictures of the device, before checking out the tuner board. K1 Plus Android DTV receiver specifications The specifications are exactly the same as the TV box, except for the added tuner: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – 8GB NAND flash (4 to 32GB optional) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support, and 3.5mm AV jack […]

January 6, 2016January 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Outernet Shares Knowledge via their Lighthouse Satellite Receiver

While many of us take Internet access for granted, about 60% of the world population did not have access to Internet at the end of 2014, and Outernet initiative aims to provide educational, emergency, and news content to this segment of the population, which still represents the majority, at a rate of 1GB per day via a satellite receiver called Lighthouse. Let’s check the hardware first: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU System Memory – 1GB DDR3 Storage – 4 GB NAND flash + 1x micro SD slot Video Output – HDMI, AV (CVBS + R/L audio) Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with up to 5 clients Tuner – DVB-S2 tuner with two antenna connectors (only one used) USB – 3x external USB 2.0 ports, 2x internal USB 2.0 ports (used) Misc – […]

December 31, 2015January 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Ten Most Popular Posts of 2015 and Statistics on CNX Software

In the second part of 2014, we saw a big jump in performance thanks to Cortex A15 and A17 based SoCs, and higher clocked Cortex A9 processors such as Rockchip RK3288 and Amlogic S812, but in 2015, TV box companies have focused on lowering the price and adding features such as HDMI 2.0, instead of looking for higher and higher CPU and GPU performance, and they’ve also moved to 64-bit ARM platform. Intel also continued its foray into low cost HDMI sticks and mini PCbased on Bay Trail, and later on Cherry Trail based devices. The development boards story was also very much about lower cosst with the $15 Orange Pi PC, follow a few months later by the $5 Raspberry Pi Zero, although people looking for performance at any price still saw the release of Nvidia Jetson TX1 board. It’s was also a big year for IoT with the […]

December 28, 2015February 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Ugoos AM1 4K Android TV Box Unboxing and Teardown

Together with Ugoos UT4 octa-core Android mini PC, Ugoos sent me Ugoos AM1 TV box based on Amlogic S905 quad core Cortex A53 processor. There are basically two category of products with S905: entry level with 1GB RAM, and 8GB flash, which represents the majority of devices on the market, and mid range with 2GB RAM, 16 GB eMMC flash, 802.11ac WiFi and Gigabit Ethernet with devices such as MINIX NEO U1 or Tronsmart Vega S95 Telos. Ugoos AM1 is part of the second category so it will be interesting to compare its performance to the other two. But in the meantime, I’ve taken some pictures of the media player and its board to find out more about the hardware design. Ugoos AM1 Unboxing Pictures and Video All new Ugoos devices look alike, and even the retail package follows the same theme across their new devices. I got a blue […]