AMLogic Category - Page 56 of 95 - CNX Software

July 18, 2016July 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

LibreELEC 7.0 Ported to Amlogic S905 TV Boxes & ODROID-C2 Board

Most TV boxes are now sold pre-loaded with Android, but there’s still a fair amount of people who only want to play videos in their box, or only run Kodi, so they may prefer a Linux experience. Some companies provide ready-to-use solution such as ARNU Box Mach 10 64-bit Pure Linux, but in some cases it’s also possible to side-load OpenELEC or LibreELEC, with the main advantage being that it is usually quite cheaper at the cost of being a bit more complicated. Thanks to a comment by Sabai, I discovered LibreELEC 7.0.0 had been (unofficially) ported to Amlogic S905 TV boxes, and tested one devices such as NEXBOX A95X (S905), WeTek Hub, Beelink S905 Mini MXIII, MXQ Pro 4K, and others. If you own an ODROID-C2 board, you can load another LibreELEC 7.0.0 image. If you are unsure whether your Android TV box is supported, you should first try […]

July 13, 2016July 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 52 Comments

Mini M8S II TV Box (Amlogic S905X) Review – Part 1: Unboxing and Teardown

Amlogic S905X powered TV boxes have now hit the market, and compared to existing Amlogic S905 devices add VP9, and provided your TV can handle it, HDR (High Dynamic Range) support. GearBest sent me one of the cheapest S905X TV Box with Mini M8S II, and in the first part of the review, I’ll take some picture of the device, and tear it down, while the second part will be posted later, and focus on testing the firmware. MINI M8S II Unboxing The package was slightly damaged, but nothing to bad. The top reads “Mini TV Box” with some icons describing the main feaures like 4K & H.265/HEVC support, WiFi, and so on. I’ve recently realized that logos and trademarks may cause problems with customs in some countries, and the package does have several potentially problematic trademarks like HBO and Netflix, as well as logos for Twitter, Facebook, Yahoo…. In […]

July 9, 2016July 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

ARNU Box Mach 10 64-bit Pure Linux TV Box Review

In part 1 of ARNU Box Mach 10 64-bit Pure Linux review, I listed the specifications, and took some pictures of the Amlogic S905 based TV box, and its board. I’ve now completed testing of this Kodi Linux media player, going though setup and add-ons, and see how it works compared to ARNU Box Mach 10 Pure Linux based on Amlogic S812 processor. Setup, Cloudword and Configuration The setup part is basically the same as on the previous model, but I’ll go through it again. Please ignore the vertical white line on the TV in the photos below, as it’s just due to my 18 months old LG 42UB820T 4K UHD television being partially broken, and out of warranty. The boot will typically take 30 seconds, but the first time, you’ll go through ARNU Box Setup Wizard. You could skip it in theory, but it’s still a good idea to […]

July 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 106 Comments

WeTek Hub Amlogic S905 TV Box Gets Android 6.0 Marshmallow Firmware

Amlogic S905 TV boxes are currently running Android 5.1, but a few are now getting Android 6.0 support including MXQ Plus, and soon K1 Plus. VideoStrong refused to provide the firmware for MXQ Plus as I did not own the box, but WeTek has already provided their latest beta Android 6.0 firmware to testers and reviewers working on WeTek Hub, which I plan to review next week with Android 5.1 first. The main changes with Android 6.0, beside the expected better performance, are support audio HAL 61937 pack allowing HD audio pass-through on all apps, as well as Microsoft PlayReady 3.0 permitting Ultra HD 4K DRM video streaming. Eventually, Android 6.0 update will be available through OTA, but currently the beta firmware (DB-J9-wetekhub-marshmallow-ota-2016-07-06_12-00-03.zip) needs to be copied to a micro SD card, and update through Recovery after wiping data and media. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as […]

July 1, 2016July 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Mini M8S II Amlogic S905X Android TV Box with 2GB RAM Sells for $37

MINI M8S is a relatively popular Android TV box based on Amlogic S905 thanks to its low price ($33) and the inclusion of 2GB RAM. There’s now a new model simply called MINI M8S II with the same specifications, except the processor has been updated to Amlogic S905X, adding VP9 and HDR support, and selling for $36.99 on GearBest with coupon GBM8SII. Mini M8S II specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI 2.0b up to 4K @ 60 fps Audio – HDMI, optical S/PDIF Video Codecs – VP9 4K @ 60 fps, 10-bit H.265 4K @ 60 fps, H.264 4K @ 30 fps Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 USB – 2x USB 2.0 host […]

June 30, 2016June 30, 2016 by Ray - 5 Comments

ROOFULL MRX 4K Android TV Box Review

CNXSoft: I’ve got many requests to review TV boxes, but I don’t always have time for them all, so from time to time I get people who help me do reviews, and this review of Roofull MRX TV box powered by Amlogic S905 processor had been done by Ray, who like me has been playing with many other Android TV boxes. ROOFULL MRX Specifications Operation System – Android 5.1 CPU – Amlogic S905 64-bit Quad core Cortex A53 up to @2GHz GPU – Penta Core Mali-450 RAM – 2GB DDRIII ROM – 16GB eMMC flash SD Storage expendable up to 32GB Bluetooth – BT 4.0 Antenna – Built-in antenna for WiFi Media UHD 4K x 2K: Support Full HD 1080P: Support HEVC H.265/H.264: Support Video/Picture Decoding Support: *.mkv,*.wmv,*.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4, *.rm and *.jpg file formats Audio Format Support: MP3,AAC,WMA,RM,FLAC,Ogg Communication WiFi: IEEE 802.11 a/b/g/n (2.4GHz/5GHz) Ethernet: […]

June 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S912(-H) TV Box Boards Are Starting to Show Up

Amlogic S912 is one of the most expected processor this year for TV box users, and while there’s still a few months development needed before devices based on the new platform go on sale, some boards have started to surface on the Internet. The first board named S912_MBX_REF_Q02_V01 is shown above, and has the following specifications: SoC – Amlogic S912 or S912-H octo core ARM Cortex A53 processor @ 2.0GHz with ARM Mali-820MP3 @ 750MHz+ System Memory – 2GB (Optional 1GB) Storage – 16GB eMMC flash (Optional 8GB) + micro SD slot Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV, and optical S/PDIF Connectivity – Gigabit Ethernet, WiFi 802.11 b/g/n/ac + Bluetooth 4.0 Misc – IR receiver, recovery push button (behind AV jack) As a reminder the -H suffix means Dolby and DTS licenses are paid for, so audio down-mixing will work in all apps. […]

June 24, 2016June 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Does Amlogic S905X Support USB 3.0?

Despite Amlogic roadmap claiming none of the upcoming Amlogic TV box SoCs will support USB 3.0, I’ve been informed that Amlogic S905X might already support USB 3.0. So I had a check with NEXBOX A5 TV box. First we can see dwc3 (DesignWare USB3) module is loaded:

lsmod
Module                  Size  Used by
dwc3                   17981  0 
mali                  233433  36

lsmod

Module Size Used by

dwc3 17981 0

mali 233433 36

then this happens when I connect a USB 3.0 hard drive or flash drive:

[ 4812.378262@0] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[ 4812.798557@0] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 4812.801416@0] scsi1 : usb-storage 1-2:1.0

[ 4812.378262@0] usb 1-2: new high-speed USB device number 7 using xhci-hcd

[ 4812.798557@0] usb-storage 1-2:1.0: USB Mass Storage device detected

[ 4812.801416@0] scsi1 : usb-storage 1-2:1.0

The important point here is xhci, which stands for “eXtensible Host Controller Interface” and supports USB 1.x to USB 3.x devices. The next step is to check performance, but since S905X is running Android 6.0, I went through permission issues with both A1SD bench and Disk Speed apps, so I reverted to using dd to read a large file to /dev/null. Result with USB 3.0 hard drive:

dd if=Sintel-Bluray.iso of=/dev/null bs=1024*1024*32                           
47+1 records in
47+1 records out
1593180160 bytes transferred in 42.681 secs (37327620 bytes/sec)

dd if=Sintel-Bluray.iso of=/dev/null bs=1024*1024*32

47+1 records in

47+1 records out

1593180160 bytes transferred in 42.681 secs (37327620 bytes/sec)

That’s about 35.6 MB/s, which would be an excellent USB 2.0 transfer rate, but not quite USB 3.0 material, […]