AMLogic Category - Page 53 of 95 - CNX Software

August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Beelink GT1 Android TV Box Powered by Amlogic S912 Sells for $56 (Promo)

In a recent list of Amlogic S912 TV boxes we found out that factory prices ranged between $47 to $54 for typical devices with 2GB RAM and 16GB internal storage, but you can only get those price by buying in quantities, and they don’t include shipping. However, GearBest has just informed me they lowered Beelink GT1 prices to $55.99 shipped with GBGT1 coupon, which – provided the box works well – looks like a good bargain. Beelink GT1 specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash, micro SD slot up to 32GB Video Output – HDMI 2.0a Audio Output – HDMI and optical S/PDIF Connectivity – Gigabit Ethernet, WiFi 802.11 b/g/n/ac, and Bluetooth 4.0 USB – 2x USB 2.0 ports Misc – IR receiver Power Supply – […]

August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

M12N Amlogic S912 TV Box Benchmarks

Since Shenzhen Shiningworth MXQ Plus M12N is my first TV box powered by Amlogic S912 octa-core processor, I’ve decided to write a separate post to show system information with CPU-Z, and benchmark results with Antutu 6.x, Vellamo 3.x, and 3Dmark Ice Storm Extreme. Please note that it may not be representative of all Amlogic S912 boards, as mentioned in the teardown post, there are some concerns about the thermal design of M12N TV box. M12N / Amlogic S912 System Info I’ve merged CPU-Z’ SOC, DEVICE and SYSTEM data into a single table. The app correctly detects an 8 core Cortex A53 processor @ 100 MHz to 2.02 GHz with an ARM Mali-T820 GPU. The brand for this particurlar device is MXQ, and Model m12n. Frame buffer resolution is 1920×1080, and memory and storage data are both OK for a box with 2GB and 16GB flash. The device runs Android 6.0.1 […]

August 16, 2016August 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

SZTomato TVI Amlogic S905X Development Board to Support Android 6.0, OpenELEC 7.0, and Ubuntu 16.04

Shenzhen Tomato has been selling Android TV boxes for a few years now, but one of their next product will be a development board based on Amlogic S905X processor with 8GB flash, 2GB RAM, and the usual 40-pin Raspberry Pi header. SZTomato TVI development board specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (1GB or less as option) Storage – 8GB Samsung eMMC flash (other capacities as option) + micro SD slot Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz Connectivity – Fast Ethernet port, 802.11 b/g/n WiFi and Bluetooth 4.0 (Ampak AP6212) with IPEX connector USB – 2x USB 2.0 host ports with 500mA fuses, 1x USB type C port for power and USB devices (no video) Expansion header – 40-pin Raspberry Pi compatible header with USB, […]

August 15, 2016October 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 55 Comments

Amlogic S912 Android TV Boxes List So Far

Following up on the tradition to create list of TV boxes with popular processor, such as my Amlogic S905 TV boxes and sticks list, I’ve decided to generate a comparison table for the first ten Amlogic S912 Android TV boxes announced so far. There won’t be any S912 TV sticks, as the processor probably dissipate a little too much heat to be useful in that form factor. All TV boxes in the table below share the same Amlogic S912 octa-core Cortex A53 processor @ 2.0 GHz with an ARM Mali-820MP3 GPU, support for HDMI 2.0a output, HDR, 4K video playback for VP9, H.265 and H.264 codecs, and run Android 6.0, so I only included columns for items that differ between products. Remarks: AV means 3.5mm AV jack with composite and stereo audio, and prices are usually retail prices with shipping by registered airmail from China, except for the ones followed […]

August 15, 2016August 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

4K VP9, H.265 and H.264 Video Playback in Amlogic S912 M12N TV Box

I’ve received my first Amlogic S912 TV box with MXQ Plus M12N TV box this week-end, and I’ve decided to start testing by showing the media capabilities of the platform that is supposed to support 4K VP9 up to 60Hz, 4K 10-bit H.265 up to 60Hz and 4K H.264 up to 30 Hz. I connected the device to Onkyo TX-NR636 A/V recevier itself connected to LG 42UB820T 4K UHD TV, set video output to 2160p @ 60Hz, and played several 4K video samples from a USB hard drive using the pre-installed version of Kodi 16.1: 4K Hawaii Sunset _ GoPro Hero 4 Black [email protected] (Downloaded from YouTube) – OK Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video a bit choppy, large audio delay. Expected […]

August 13, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

MXQ Plus M12N (Amlogic S912) TV Box Review – Part 1: Specs, Unboxing, and Teardown

Shenzhen Shiningworth has just sent me the first Amlogic S912 Android TV box for review with their MXQ Plus M12N model. The first part of the review will focus on specifications, accessories, and hardware design, and in the second part I’ll connect and boot the device to make a thorough review of the firmware. MXQ Plus M12N Specifications The specifications are pretty standard and comparable to the ones of yet to launch Amlogic S912 TV boxes: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash and SD slot up to 32GB Video Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and AV port (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Connectivity – Fast Ethernet, dual band WiFi 802.11 b/g/n/ac, […]

August 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Hacker H3 Smart Home Multimedia Gateway Combines Amlogic S905 and Mediatek MT7628AN Processors

There are plenty of Amlogic S905 TV boxes on the market, but Hacker H3 has some notable features such as an internal 2.5″ SATA bay, as well as MediaTek MT7628AN WiSoC and MT7612E 802.11ac 867Mbps chip to provide router functionality via one WAN port, two LAN ports, and WLAN. Hacker H3 media gateway specifications: Media SoC – Amlogic S905 quad core Cortex A53 processor @ up to 2.0GHz with penta-core Mali-450MP GPU System Memory – 1GB DDR3 @ 1866MHz Storage – 16 or 64GB eMMC flash + 1x SATA bay up to 6TB Network SoCs – Mediatek MT7628AN MIPS 24KEc CPU @ 580MHz + Mediatek MT7612E 867Mbps 802.11ac chipset Video Output – HDMI 2.0 port up to 4K @ 60 Hz Audio Output – HDMI + 3.5mm audio jack Connectivity WiFi 802.11 b/g/n up to 300 Mbps, 802.11ac up to 866 Mbps (AC1200 router) with two built-in antennas 2x 10/100M […]

August 10, 2016April 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 75 Comments

DVB Channel Editor Tools for K1 Plus T2 S2 Android TV Box

K1 Plus T2/S2 is one of the most popular Android TV boxes with digital tuners, including both DVB-T2/T/C and DVB-S2/S tuners, and I get frequent comments and questions on K1 Plus T2 S2 review. One of the often asked request is a channel editor to use on a computer, in order to change the names, the order of channels, and set favorites. You can export the DVB data from the DTV app in Android with all data stored in dtv_user_data directory, and in theory, one web based editor is supposed to let you do just that, but it did not work for me. Another option shared with us by gabywap is K1_Plus_Editor.exe (Mirror) developed by Sm0ke, who appears to mostly frequent Russian forums. So I downloaded it, and launched it with Wine in Ubuntu 16.04, but the channel data I had could not load, and the program showed some error […]