AMLogic Category - Page 42 of 95 - CNX Software

June 9, 2017 by Ray - 11 Comments

Sunvell T95P Android Plug Computer mini Review

First of all, I have to say sorry for the delay for the review, but at the time I got this “beauty”, it would not power up, even though the blue light showed up out of the USB connector… I tried to recover a couple of times, no success at all… Getting a little upset, and tried after weeks of not thinking anymore… So I used an old trick, we all know, I guess. The freezer trick! I covered the Sunvell T95P in a soft linen towel, and put it in the freezer for around 3 hours. After that, it really worked like nothing happened before. There is also the old fascinating hairspray trick for “boards”… That could have been of help in some cases, but I couldn’t find a way to open this box without it being damaged for good. Here we go. Claimed Product details of T95P: 2G/8G […]

May 28, 2017May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

FriendlyELEC Mailbag: NanoPi NEO OLED Starter Kit, NEO Station NS-120B, and NanoPi K2 Multimedia Kit

FriendlyELEC will send me some review samples from time to time, and normally I just ask for one item, but they aways send a bunch of their products instead. This time I asked for a NanoPi NEO NAS Kit v1.2 to play with, but I got clearly more than what I asked for… Let’s start with the box at the top. It contains “NanoPi NEO complete starter kit” selling for $29.99for $29.00 with the following items: NanoPi NEO board NanoHat OLED Heatsink and thermal pad kit Akuminum housing a Mico USB cable A micro SD card pre-loaded with NEO OLED Ubuntu firmware. Three buttons, and screws It’s actually not fully complete, as you’d need to provide and solder your own male headers to NanoPi NEO board. I did not have time for soldering that day, but the final results should be really neat based on pictures from their website. If […]

May 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ODROID-C2 Board Gets Experimental Ubuntu 16.04 Armbian Images with Linux 4.10

Hardkernel is doing a good job at providing working images with GPU / VPU support, and documentation for their ODROID boards. But while Exynos based ODROID-XU4(Q) boards already get firmware images with a recent Linux 4.9 kernel, Amlogic S905 based ODROID-C2 board’s Ubuntu 16.04 images still rely on the Linux 3.14 kernel released by Amlogic, plus various patchsets. But we’ve seen BayLibre is working on a Linux mainline port for Amlogic processors, and Armbian community appears to have leveraged that work, and added Ubuntu 16.04 Server and Desktop images with Linux 4.10 to their build system. Those are experimental nightly builds so they may not have been tested, and it’s likely not working as well as the Ubuntu 16.04 “legacy” images released by Hardkernel. They are also not shown in Armbian ODROID-C2 page at the time of writing, but it’s a step in the right direction. Jean-Luc Aufranc (CNXSoft)Jean-Luc started […]

May 22, 2017May 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Foxconn Bandott STB is an Amlogic S905D TV Box with Dual HDMI Input, Netflix 4K Support

So far, we’ve seen two dual tuner set-top boxes powered by Amlogic S905D processor with Sen5 Android STB and Mecool KI Pro, but earlier this year, Foxconn launched Bandott set-top box based on the processor, with any tuner, but two HDMI inputs, and Widevine L1 and PlayReady 3.0 support allowing for 4K video playback for premium services like Netflix (see Bandott page), CatchPlay, iqiyi, and myVideo. BANDOTT BA101 specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 processor @ 1.5 GHz with penta core Mali-450MP GPU System Memory – 2GB RAM Storage – 8GB flash Video Output – 1x HDMI 2.0b (HDCP) Video Input – 2x HDMI 1.4 Audio Output – HDMI, and 3.5mm headphone jack Connectivity – 10/100M Ethernet, dual band Wi-Fi 802.11ac/b/g/n (2×2), Bluetooth 4.0 USB – 1 x USB 2.0 DRM – Widevine L1 and PlayReady 3.0 The box runs Android TV 6.0, and was unveiled in […]

May 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Sen5 Amlogic S905D TV Box Review – Part 2: Android Firmware, Kodi 17, and DVB-T2 & S2 App

Sen5 is one of the first Android TV boxes powered by Amlogic S905D processor, and comes with two tuners (DVB-C/T/T2 and DVB-T/T2) with two demodulators that should allow for recording on one tuner, while watching the other, or recording two channels at the same time. We’ve already check out the hardware in the first part of the review, and seen a glimpse of the neat user interface, so today I’ll report about my experience with the device. Sen5 Android Set-Top Box First Boot, Setup Wizard, & First Impressions The STB comes with two USB ports so I used one for the hard drive, a necessity if you plan to use the PVR function, and connected a USB hub to the other with RF dongles for an air mouse and a gamepad, as well as a USB keyboard to take screenshots. I also connected Ethernet and HDMI cables, as well as […]

May 8, 2017May 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 189 Comments

Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2 Tuners Sells for $80

VideoStrong has become popular among people wanting an Android TV box with a tuner thanks to their affordable and customizable products such as K1 Plus T2 S2, or KIII Pro coming with DVB-T/T2 and DVB-S/S2 tuners. AFAIK, all there products so far came with a single demodulator meaning you could watch or record satellite or terrestrial TV, but not do both at the same time, for example watching a channel via DVB-S2, and recording one via DVB-T2. Amlogic S905D is supposed to support this, and upcoming products like Sen5 Android set-top box do come with two demodulators. Mecool KI PRO – based on the processor – has just been launched, pre-selling for $79.99 on Banggood with shipping scheduled for mid May. Mecool KI Pro specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 2 GB DDR4 Storage – 16GB […]

May 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

VolksPC OS Runs Android and Debian Simultaneously on ODROID-C2 Board

Most development boards and some TV boxes offer a dual boot image with Android and a Linux distribution. To run an Android app, you need to boot to Android OS, and if you decided you need to run Linux, you then need to reboot to the Linux OS, and you can’t simply use Alt+Tab to easily and quickly switch between Android and Linux apps. But VolksPC offers just that: the ability to run Android and Debian side-by-side, and I tested their MicroXWin unified distributions with MK808B TV stick powered by Rockchip RK3066 processor a few years ago. It was early stage at the time (July 2014), and there was some stability issues.The company has kept working on their solution, but focused on more powerful hardware, and they have now released VOLKSPC OS for ODROID-C2 with Debian XFCE and Android Marshmallow, which will run both Android and Debian applications at the […]

May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

$97 MXQ HF10 Android Bluetooth Speaker & TV Box Works with Amazon Alexa

Last fall, I wrote about Eny Technology HF10, a 2-in-1 Android 6.0 TV box & Bluetooth speaker powered by Amlogic S905X processor, but at the time it was still under development, and we did not know all the features. The device has now been launched under the MXQ brand with support for Amazon Alexa voice service, and is up for pre-order for $96.55 on GearBest. MXQ HF10 specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 128 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio HDMI output 2.5″ 10W mono bass speaker with class-D amplifier Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 1x USB 2.0 host port Misc – Power & Play/Pause combo button, […]