AMLogic Category - Page 42 of 95 - CNX Software

May 22, 2017May 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Foxconn Bandott STB is an Amlogic S905D TV Box with Dual HDMI Input, Netflix 4K Support

So far, we’ve seen two dual tuner set-top boxes powered by Amlogic S905D processor with Sen5 Android STB and Mecool KI Pro, but earlier this year, Foxconn launched Bandott set-top box based on the processor, with any tuner, but two HDMI inputs, and Widevine L1 and PlayReady 3.0 support allowing for 4K video playback for premium services like Netflix (see Bandott page), CatchPlay, iqiyi, and myVideo. BANDOTT BA101 specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 processor @ 1.5 GHz with penta core Mali-450MP GPU System Memory – 2GB RAM Storage – 8GB flash Video Output – 1x HDMI 2.0b (HDCP) Video Input – 2x HDMI 1.4 Audio Output – HDMI, and 3.5mm headphone jack Connectivity – 10/100M Ethernet, dual band Wi-Fi 802.11ac/b/g/n (2×2), Bluetooth 4.0 USB – 1 x USB 2.0 DRM – Widevine L1 and PlayReady 3.0 The box runs Android TV 6.0, and was unveiled in […]

May 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Sen5 Amlogic S905D TV Box Review – Part 2: Android Firmware, Kodi 17, and DVB-T2 & S2 App

Sen5 is one of the first Android TV boxes powered by Amlogic S905D processor, and comes with two tuners (DVB-C/T/T2 and DVB-T/T2) with two demodulators that should allow for recording on one tuner, while watching the other, or recording two channels at the same time. We’ve already check out the hardware in the first part of the review, and seen a glimpse of the neat user interface, so today I’ll report about my experience with the device. Sen5 Android Set-Top Box First Boot, Setup Wizard, & First Impressions The STB comes with two USB ports so I used one for the hard drive, a necessity if you plan to use the PVR function, and connected a USB hub to the other with RF dongles for an air mouse and a gamepad, as well as a USB keyboard to take screenshots. I also connected Ethernet and HDMI cables, as well as […]

May 8, 2017May 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 189 Comments

Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2 Tuners Sells for $80

VideoStrong has become popular among people wanting an Android TV box with a tuner thanks to their affordable and customizable products such as K1 Plus T2 S2, or KIII Pro coming with DVB-T/T2 and DVB-S/S2 tuners. AFAIK, all there products so far came with a single demodulator meaning you could watch or record satellite or terrestrial TV, but not do both at the same time, for example watching a channel via DVB-S2, and recording one via DVB-T2. Amlogic S905D is supposed to support this, and upcoming products like Sen5 Android set-top box do come with two demodulators. Mecool KI PRO – based on the processor – has just been launched, pre-selling for $79.99 on Banggood with shipping scheduled for mid May. Mecool KI Pro specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 2 GB DDR4 Storage – 16GB […]

May 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

VolksPC OS Runs Android and Debian Simultaneously on ODROID-C2 Board

Most development boards and some TV boxes offer a dual boot image with Android and a Linux distribution. To run an Android app, you need to boot to Android OS, and if you decided you need to run Linux, you then need to reboot to the Linux OS, and you can’t simply use Alt+Tab to easily and quickly switch between Android and Linux apps. But VolksPC offers just that: the ability to run Android and Debian side-by-side, and I tested their MicroXWin unified distributions with MK808B TV stick powered by Rockchip RK3066 processor a few years ago. It was early stage at the time (July 2014), and there was some stability issues.The company has kept working on their solution, but focused on more powerful hardware, and they have now released VOLKSPC OS for ODROID-C2 with Debian XFCE and Android Marshmallow, which will run both Android and Debian applications at the […]

May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

$97 MXQ HF10 Android Bluetooth Speaker & TV Box Works with Amazon Alexa

Last fall, I wrote about Eny Technology HF10, a 2-in-1 Android 6.0 TV box & Bluetooth speaker powered by Amlogic S905X processor, but at the time it was still under development, and we did not know all the features. The device has now been launched under the MXQ brand with support for Amazon Alexa voice service, and is up for pre-order for $96.55 on GearBest. MXQ HF10 specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 128 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio HDMI output 2.5″ 10W mono bass speaker with class-D amplifier Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 1x USB 2.0 host port Misc – Power & Play/Pause combo button, […]

April 25, 2017April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SDMC DV8230-AP LTE is an Android 7.0 TV Box with a 4G LTE Router Module

Shenzhen SDMC Technology launched DV8219-LTE Android TV box with 4G modem powered by Amlogic S905X processor a while ago, and the company is back with a new model called DV8230-AP LTE with the same processor, but running Android 7.0, and what they call a “4G LTE router function”. SDMC DV8230-AP LTE specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 2GB DDR3 RAM Storage – 8GB eMMC flash (4 to 64GB as option) + micro SD card slot Video Output – HDMI 2.0a, 3.5mm AV port Audio Output – HDMI, AV, optical S/PDIF Connectivity 10/100M Ethernet port 802.11 b/g/n WiFi (Dual band optional) Optional Bluetooth 4.0 Built-in 4G Module + SIM card slot 2x dBi external antennas USB – 2x USB 2.0 ports Misc – IR receiver; LEDs; standby key; reset button; WPS button Power Supply – […]

April 14, 2017April 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Geniatech ATV329 is a 3G & 4G LTE Android TV Box Powered by Amlogic S905 Processor

In many countries, people get broadband Internet via ADSL or “fiber to the home”, but in some regions, notably the Middle East and Africa, there may not be such option, and people instead rely on cellular networks like 4G LTE for their Internet access. I’ve already covered SDMC TV boxes with a 4G LTE connectivity, but there’s now one more option thanks to Geniatech ATV329 Android TV box powered by Amlogic S905 processor, and including a 4G LTE modem & a SIM card slot. Geniatech Enjoy TV Nano ATV329 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 1.5 GHz with a penta-core Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash, SD card slot Video & Audio Output – HDMI 2.0 port Connectivity Ethernet 802.11 b/g/n Wi-Fi + Bluetooth 4.0 (AP6212) with one external antenna GSM, 3G, and 4G connectivity with one external […]

April 13, 2017April 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

$40 NanoPi K2 Board Powered by Amlogic S905 Processor Competes with ODROID-C2, Raspberry Pi 3

Hardkernel ODROID-C2 board is getting some direct competition with FriendlyELEC’s NanoPi K2 development board powered with Amlogic S905 processor with 2GB RAM, a very similar form factor, and many of the same features, which together with Khadas Vim (Pro) brings the number of low cost Amlogic based development boards to three. NanoPi K2 board specifications with differences compared to ODROID-C2 highlighted in bold or stricken-through: SoC – Amlogic S905 quad core cortex-A53 processor @ 1.5 GHz with penta core Mali-450MP GPU System Memory – 2GB DDR3 Storage – eMMC module socket, micro SD slot Video Output – HDMI 2.0 up to 4K @ 60 Hz Connectivity – Gigabit Ethernet (Realtek RTL8211F), 802.11 b/g/n WiFi + Bluetooth 4.0 (AP6212 module) with chip antenna + IPX connector USB – 4x USB 2.0 host ports (GL825G USB hub) + micro USB OTG port for power and adata Expansion Header 40-pin header with GPIO, […]