AMLogic Category - Page 35 of 95 - CNX Software

April 2, 2018April 3, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 4.16 Release – Main Changes, Arm and MIPS Architectures

Linus Torvalds has just released Linux 4.16: So the take from final week of the 4.16 release looks a lot like rc7, in that about half of it is networking. If it wasn’t for that, it would all be very small and calm. We had a number of fixes and cleanups elsewhere, but none of it made me go “uhhuh, better let this soak for another week”. And davem didn’t think the networking was a reason to delay the release, so I’m not. End result: 4.16 is out, and the merge window for 4.17 is open and I’ll start doing pull requests tomorrow. Outside of networking, most of the last week was various arch fixlets (powerpc, arm, x86, arm64), some driver fixes (mainly scsi and rdma) and misc other noise (documentation, vm, perf). The appended shortlog gives an overview of the details (again, this is only the small stuff in […]

February 19, 2018February 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

VideoStrong Introduces Low Cost Version of KI Plus T2 S2 Hybrid Android TV Box with Amlogic S805X Processor

VideoStrong K1 Plus T2/S2 is an Android 5.1 set-top-box with DVB-S/S2 and DVB-T/T2 tuner that was launched roughly two years ago with Amlogic S905 quad core processor. Since then, the company has now launched variant of the model with Amlogic S912 (e.g. KIII Pro hybrid TV box) or Amlogic S905D (e.g. KI Pro set-top box) processors. But now, provided the information on Alibaba is correct, the company has launched a new version of KI Plus T2/S2 with Amlogic S805X which should be cheaper, run a more recent Android 7.1 operating system, at the cost of losing support for 4K decoding, since the processor only support Full HD (1080p60) decoding at most. Since the company updated an existing product, some specific details are wrong on Alibaba, but KI Plus T2 S2 (2018) specifications should be as follows: SoC – Amlogic S805X quad core ARM Cortex-A53 @ up to 1.2 GHz with […]

January 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Xiaomi Mi Box 4 & 4C 4K HDR TV Boxes Launched with Amlogic S905L Processor

Remember Amlogic S905L Processor? Me neither, but I wrote about it in September 2016, with the processor being an updated version of Amlogic S905X without VP9 support, and adding HDMI 2.0b output with support for Hybrid Log Gamma (HLG) HDR. One reason most people won’t remember it is because so far, no TV boxes featured the processor, but this has now changed with Xiaomi introduced Mi Box 4 & 4c TV boxes for the Chinese market. Xiaomi Mi Box 4c is the entry level model (Black color), and Mi Box 4 is slightly higher end with more memory and Bluetooth (White color), but both devices share most of the same specifications: SoC – Amlogic S905L quad core ARM Cortex-A53 @ up to 1.5GHz with penta-core Mali-450MP GPU @ up to 750 MHz System Memory Mi Box 4c – 1GB RAM Mi Box 4 – 2GB RAM Storage – 8GB eMMC […]

January 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Linux 4.15 Release – Main Changes, Arm and MIPS Architectures

Linus Torvald has released Linux 4.15 last Sunday: After a release cycle that was unusual in so many (bad) ways, this last week was really pleasant. Quiet and small, and no last-minute panics, just small fixes for various issues. I never got a feeling that I’d need to extend things by yet another week, and 4.15 looks fine to me. Half the changes in the last week were misc driver stuff (gpu, input, networking) with the other half being a mix of networking, core kernel and arch updates (mainly x86). But all of it is tiny. So at least we had one good week. This obviously was not a pleasant release cycle, with the whole meltdown/spectre thing coming in in the middle of the cycle and not really gelling with our normal release cycle. The extra two weeks were obviously mainly due to that whole timing issue. Also, it is […]

January 24, 2018January 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Mainline Linux on Amlogic S905/S905X/S912 SoCs – 2018 Status Update

BayLibre is working on mainline Linux for Amlogic SoC, and in February of last year, Neil Armstrong gave a presentation entitled “Mainline Linux on AmLogic SoCs” at the Embedded Linux Conference 2017. Neil has recently (actually yesterday) given another presentation about the status of mainline Linux on Amlogic processor at linux.conf.au 2018, so we have some updated information now. He goes through the whole history of upstreaming Linux for Amlogic SoCs, but I’ll provided summary of the new features, and if you have time you can watch the video (25 minutes) embed below, or the slides. Early last year, Linux 4.10 already supported general I/Os, USB host (for S905), Gigabit Ethernet, eMMC/SD/SDIO, PSCI for SMP, and SCPI for DVFS for Amlogic processor, and BayLibre was said to be working on HDMI display support, Mali (as external module), audio input/output, and high-speed eMMC modes. Based on the slide above, with Linux […]

January 22, 2018January 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SDMC DV8020 & DV8035 Full HD HDR TV Boxes Feature Amlogic S805X Processor

Most new Android TV boxes on the market today support 4K resolution at least up to 30 Hz, but Amlogic decided to target the lower end of the market with S805X quad core Cortex A53 processor that supports VP9, H.265 and H.264 up to 1080p60 only. However, so far I could not find any products based on the new processor, but this has changed this afternoon, as I’ve come across SDMC DV8020 & DV8035 TV boxes powered by Amlogic S805X processor. Both models share most of the same specifications, with the main differences being an extra S/PDIF output, and the enclosure: SoC Amlogic S805X quad core Arm Cortex-A53 up to 1.2GHz with penta core Mali-450MP GPU up to 650MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash (option: 4GB to 64GB), micro SD slot Video Output – HDMI 2.0b up to 1080p60 with CEC & HDR support (HDR10 […]

January 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

CCC Air Stick 4K TV Stick Runs Android TV, Supports HDR10, aptX HD Bluetooth Audio (Japan)

It’s been a while since I have seen an Amlogic S912 TV stick, and so far none of them would run Android TV operating system. But CCC Air Stick 4K does, meaning it supports Google Cast like a ChromeCast, as well as Voice Commands through a remote control. The company also claims support for aptX and aptX HD Bluetooth audio, as well as online services such as Hulu, Netflix, Spotify, and some Japanese specific services, since the TV stick only targets the Japanese market. Air Stick 4K specifications: SoC – Amlogic S912J 64-bit octa core Arm Cortex A53 @ up to 1.5GHz with Arm Mali GPU System Memory – 2 GB Storage – 16 GB flash Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10, CEC support Audio – HDMI audio output, aptX / aptX audio over Bluetooth Connectivity Dual band (2.4 GHz/5 GHz) 802.11b/g/n/ac WiFi […]

January 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

$38 MECOOL M8S PRO W “with Voice Control” TV Box Runs Android TV 7.1 OS

There was a time when most TV boxes would run Android operating system for mobile with lots of modifications to make it suitable for the big screen, except for a few models that would run the official Android TV operating systems. But things are now changing, with announced from Geniatech, WeTek, and others all announcing certified Android TV set-top boxes and media hubs. We’ve even been told Amlogic will now only provide Android TV SDK from now on with no support for “normal Android”, and the good news is that inexpensive TV box running Android TV will become common place, and one of those devices, MECOOL M8S PRO W is the cheapest I’ve seen so far going for $37.99 shipped with coupon DSJMVRWB (pre-order) MECOOL M8S PRO W specifications: SoC – Amlogic S905W quad core ARM Cortex-A53 processor with penta-core Mali-450MP3 GPU @ 750 MHz System Memory – 2GB DDR3 […]