AMD Fusion G-Series Category - CNX Software

September 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Topton N1 dual-bay NAS features AMD Athlon 3050e CPU, four Ethernet ports

Powered by an AMD Athlon Silver 3050e dual-core processor, Topton N1 (aka TP-N1) NAS comes with two SATA bays for 2.5-inch or 3.5-inch drives, as well as four gigabit Ethernet ports. The system can support up to 32GB RAM, relies on M.2 SSD storage for the OS, and can provide up to 40TB of data storage through the two SATA bays. It is also equipped with an HDMI output port, several USB 3.x/2.0 ports, as well as a 3.5mm audio jack. Topton N1 specifications: SoC – AMD Athlon Silver 3050e dual-core/quad-thread processor @ 1.4 / 2.8 GHz (Turbo) with Radeon Vega 3 graphics @ 1 GHz; TDP: 6W System Memory – Up to 32GB DDR4-2400 RAM via two SO-DIMM slots Storage M.2 2280 socket for a (PCIe 3.0) NVMe SSD 2x SATA III bay for 2.5-inch and 3.5-inch driver for a maximum of 40TB data storage (based on currently available […]

June 1, 2018June 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

UDOO BOLT AMD Ryzen Embedded V1000 SBC Goes for $229 and Up (Crowdfunding)

While Intel has been outing low cost and low power processors with less than 10W TDP over the years with their Bay Trail, Cherry Trail, Braswell, Apollo Lake, and now Gemini Lake processors, AMD has not really ventured into the low power space, and the latest announcements about 10-12W processors was for their Embedded G-Series J Family, which I have not seen in many products. More recently, the company introduced Ryzen Embedded V1000 family of processors with 4 to 8 Zen cores, 4K support, 10 GbE interface, and more with a TDP of 12 to 25W for Ryzen Embedded V1202B & V1605B dual / quad core processors. The latest x86 UDOO board – dubbed UDOO BOLT – will be one of the rare AMD development boards available on the market with pricing starting at $229. Two versions of the board will be available: UDOO BOLT v3 with Ryzen Embedded V1202B, […]

January 4, 2018January 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Companies Address Concerns related to Speculative Execution Exploits: Meltdown and Spectre

Yesterday, news surfaced about a “bug” in Intel processors that could be fixed at the operating system level at the cost of a decrease in performance for some tasks, from a typical, and barely noticeable 5% hit, to a more consequent 30% hit for some specific tasks, and as we discussed yesterday I/O intensive tasks are the most impacted by the changes. While Intel (and Arm) are impacted, AMD claims not to be, and the issue was reported by major news outlets and likely impacting the stock price of the companies with Intel stock losing 3.39%, and AMD stock gaining 5.19%, so obviously every company felt the need to answer, starting with Intel’s response to security research findings: Recent reports that these exploits are caused by a “bug” or a “flaw” and are unique to Intel products are incorrect. Based on the analysis to date, many types of computing devices […]

July 7, 2017July 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

$89 Sapphire BP-LX210KL Board is Powered by AMD G-Series LX Dual Core Processor

Mentor Embedded will regularly organize webinars to show how to use or leverage their embedded Linux distribution, but their latest upcoming webinar entitled “Deploying Embedded Linux on an AMD LX-based sub-$100 Sapphire LX210 board” caught my eyes simply because there aren’t that many low cost AMD boards. The only ones I can think of are Gizmo 2 board sold for $200, as well as some PC Engines boards starting at $106 and mainly designed for headless applications. It took me several attempts on DuckDuckGo and Google, before finding Sapphire LX 210 product page. It’s even unclear how the board is called, as the company refers to it as BP-LX210KL at times, and BP-FT3bGS or BP-210KL in other instances. Preliminary specifications: SoC – AMD G-series LX210 dual core processor with Radeon GPU supporting DirectX 11.1, OpenGL 4.2 and OpenCL.2 manufactured using 28nm process technology System Memory – 2x DDR3 SO-DIMM up to […]

February 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

AMD Launches Embedded G-Series J Family of Low Power Low Cost Processors with HDMI 2.0 and 4K HEVC Decode

If you want 4K multimedia features like HDMI 2.0 and 4K H.265 video decoding @ 60 fps at a reasonable price point, ARM is basically the only game in town with Rockchip RK3229 and Amlogic S905 TV boxes in the low end segment ($30 to $40) and on the other side of the spectrum SoCs such as Nvidia Tegra X1 used in the Shield Android TV box for around $200. But AMD has now added the J family to its G-series embedded processor with two x86 cores, AMD Radeon GCN core, and multimedia capabilities including HDMI 2.0 and 4K HEVC decoding, with the processors targeting thin clients, IP set-top boxes and TVs, casino gaming, industrial control and automation, digital signage, and communications networks. Key features of AMD G-Series J family processors: 2x “Excavator” x86 cores with 1MB shared L2 cache AMD Radeon R5E graphics (up to 3CUs) with support for […]

January 7, 2016January 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Remix OS 2.0 for PC Will Run on Most Intel and AMD Computers

Remix OS is a fork of Android developed by Jide and optimized for desktop use, in a similar way to what Rockchip is doing with Light Biz OS, except the developers do not limit themselves to one specific SoC vendor with the operating system found in Remix Mini (Allwinner A64), and Remix Ultra-tablet (Nvidia Tegra 4), as well as several firmware images for popular Android devices such as Nexus 9 & 10. Now the company is planning to release Remix OS 2.0 for Intel and AMD based computer including PCs and Macs. How do they achieved that? Technically same way as Console OS by forking Android-x86 project, except they did it with less contention, and instead Jide partnered with Android-x86 developers. Remix OS for PCs alpha is a version of Remix OS 2.0 based on Android 5.0 with the taskbar, multiple windows, better memory management (it will try not to […]

August 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MOI Pro AMD IPTV Streaming Server Supports Up to 16 Tuners

TBS Technologies is a company specializing in digital TV tuners, with their catalog includes various DVB-T2, DVB-C, DVB-S2 and ATSC tuner cards. They also happen to be the designer of Matrix board and Matrix 2 Android set-top box, both of which run Android or Linux and support some of the company’s tuners. But they also have higher end products such as MOI Pro AMD IPTV streamer based on an AMD Embedded G-Series processor, and supporting up to 4 tuner cards with up to 4 tuners each. TBS MOI Pro AMD specifications: SoC – AMD GX-412HC quad core processor @ 1.2GHz with AMD Radeon HD GPU @ 300MHz (7W TDP) System Memory – 4GB DDR3-1333 Storage – 30GB mSATA SSD, 1x SATA @ 6.0Gb/s, Video Output – 1x HDMI, 1x VGA (reserved connection?) Connectivity – 2x Gigabit Ethernet Tuners – Up to 4 PCIe TV tuner cards (DVB-S2 or DVB-T2/T/C) for […]

November 11, 2014November 11, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

$199 Gizmo 2 Development Board Powered by AMD G-Series GX210HA SoC

There are only a few Intel / AMD x86 embedded development boards on the market, at least for the hobbyist market, namely MinnowBoard MAX based on Intel E3815 or E3825 processors, and Gizmophere Explorer Kit powered by AMD G-Series GT-40E dual core APU + A55E hub controller. Gizmosphere, a non-profit organization, had now released a new version of their embedded board called Gizmo 2 powered by AMD G-Series GX210HA SoC combining a dual core x86 processor, a Radeon GPU, and peripherals. Gizmo 2 development board specifications: SoC – AMD Embedded G-Series GX210HA SOC with a dual core “Jaguar” processor @ 1.0 GHz and a Radeon 8210E GPU @ 300 MHz with support for DirectX 11.1, OpenGL 4.2x and OpenCL 1.2. 153 GFLOPS of performance. 9W TDP. System Memory – 1GB DDR3-1600 SDRAM Storage – mSATA/mini PCIe Connector + micro SD card slot Video Output – HDMI Audio I/O – HDMI and […]