Allwinner R-Series Category - Page 8 of 8 - CNX Software

January 3, 2016May 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

Raspberry Pi Zero, C.H.I.P, and Orange Pi One Boards’ Features and Price Comparisons

With Raspberry Pi Zero, Next Thing C.H.I.P, and Orange Pi One, we now have have three ARM Linux development boards selling (now or soon) for less than $10 excluding shipping and taxes. So I’d think it would be interesting to compare the features of the boards, and prices for different use cases. The comparison table below shows the three boards features side-by-side with items highlighted in green for the best or extra features, and in red for the weakest. Some cells will have to be filled later as data is currently not available (marked TBD). Raspberry Pi Zero C.H.I.P Orange Pi One Processor Broadcom BCM2835 single core ARM11 processor @ 1GHz (~1250 DMIPS) Allwinner R8 Cortex A8 processor @ 1 GHz (2000 DMIPS) Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz (4x 2280 DMIPS) GPU VideoCore IV ARM Mali-400 ARM Mali-400MP2 Video Decoding 1080p30 for H.264, MPEG2* and […]

December 10, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Allwinner A64 Android 5.1 SDK and Linux Source Code

Allwinner A64 is likely to become quite popular as it will be used in PINE A64 board, Olimex open source hardware laptop featuring A64-OLinuXino board, and some low cost tablets. We’ve already got some documentation such as Allwinner A64 datasheet and user’s manual, but AFAIK, there was no source code released for the board. The good news is that you can now download Android 5.1 SDK and Linux source code on Baidu with four files available: lichee_A64_A5.1_V1.0.tar.gz – Linux source code android_A64_A5.1_V1.0.tar.gz– Android 5.1 SDK android_prebuilts_A64_A5.1_V1.0.tar.gz – Some pre-built binaries for Android A64硬件资料.zip – Documentation including the datasheet, product brief, and user’s manual which we’ve already got, but also some hardware with reference schematics, PCB layout files, and BoM for an Allwinner A64 tablet. That’s about 7.4GB to download, and apart from the documentation, the download is not quite complete yet, so I could not look into the details of […]

December 9, 2015December 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

PINE A64 Development Board Kickstarter Campaign is Up

As previously announced, PINE64 $15 64-bit ARM Linux computer was due to launch on December 9, and the Kickstarter campaign is now up, and the shipping costs are $7 to the US, and $12 to the rest of the world. The name have changed to PINE A64 and PINE A64+ since the first announcement, but the specifications have mostly not changed for th two boards with an Allwinner quad core Cortex A53 processor, 512MB to 1GB RAM, a micro SD slot for storage, Gigabit Ethernet, HDMI 1.4, USB ports, and some other expansion headers for I/Os, displays or cameras. The PINE A64+ however now has an option for 2GB for $29, and we’ve got a bit more information about optional modules and accessories: Wireless module with WiFi and Bluetooth adapter Zwave adapter 7″ LCD touchpanel (PINE64+ only) Dry contact I/O board 5MP MIPI CSI camera Various sensors Various remote controls […]

December 5, 2015December 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

$15 PINE64 64-Bit ARM Single Board Computer is Powered by Allwinner R18 Processor (Crowdfunding)

It looks like Next Things’ C.H.I.P computer with Allwinner R8 processor will soon have a big brother with PINE A64 board powered by Allwinner R18 / A64 quad core Cortex A53 processor, and made by a US start-up also called PINE 64. PINE A64 and PINE A64+, a version with more memory and features, will have the following specifications: SoC – Allwinner R18 (based on Allwinner A64?) quad core ARM Cortex A53 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory PINE64 – 512 MB DDR3 PINE64+ – 1 GB DDR3 Storage – micro SD slot supporting up to 256 GB Video Output HDMI 1.4 up to 4K resolution @ 30 Hz PINE64+ only – 4-lane MIPI DSI connector and touch panel connector Video Codecs – H.265 up to 4K Audio – HDMI, 3.5 mm headphone jack Connectivity PINE64 – Fast Ethernet + optional WiFi & Bluetooth module PINE64+ – […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Next Thing Has Released Software and Hardware Files for the $9 CHIP Computer

Next Thing CHIP computer powered by Allwinner R8 module, also referred as “the $9 computer“, had a very successful crowdfunding campaign having raised over $2,000,000 from nearly 40,000 backers. When launching an electronics products on a crowdfunding campaign, many companies claim their device will be open source, only to disappoint once the perks actually ship, and Next Thing made the same promise, except they appear to have delivered as shown in their latest update “Holy C.H.I.P! It’s C.H.I.P!!!” showing the first production samples, and providing links to hardware design files for the Alpha version, as well as buildroot, U-boot and Linux source code. All resources can be found on docs.nexthing.co, but let’s check what they’ve released so far. Hardware design files on Github include: A Bill of Materials (BoM) Schematics in PDF and DSN formats PCB Layout in BRD and PNG format Pinouts for U12 and U14 connectors Mechanical files […]

June 7, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Allwinner R8 Module Datasheet and Price. Is the $9 C.H.I.P Computer Selling at a Loss?

Allwinner R8 Cortex A8 processor, very similar to Allwinner A13, but optimized for IoT applications, was first unveiled via the $9 C.H.I.P computer crowdfunding campaign, but at the time we did not have that many technical details. However, Olimex had already made several Allwinner boards in the past, such as A20-OLinuXino-LIME, so they decided to investigate if they too could use Allwinner R8 processor, or rather Allwinner R8 Module (R8M) with R8 SoC, 4/8GB NAND Flash and 512 MB RAM. So they managed to get R8M datasheet, and got quoted $4.8 for Allwinner R8 and $16 for Allwinner R8M with 512 MB RAM and 8GB NAND Flash for 5,000 unit orders. Wait… If R8M module is $16, how can C.H.I.P sell it for $9? One difference is that C.H.I.P module only has 4GB NAND flash, but the module quoted to Olimex appears to come with 8GB flash, but it’s not […]

June 5, 2015June 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Allwinner R58 Octa-core Processor Targets 2-in-1 Android Laptops

Allwinner R-series processor family, such as Allwinner R8, is supposed to target “IoT applications”, but IoT must have recently taken a whole new meaning as the latest Allwinner R58 octa-core processor targets 2-in-1 laptops running Android. Allwinner website however lists R58 as an high-end IoT platform for virtual reality and robotics. Allwinner R58 specifications: CPU – Octa-Core Cortex-A7 CPU up to 2.0 GHz GPU – PowerVR SGX544 GPU @ 600 MHz with support for OpenGL ES 2.0/1.1, OpenCL 1.1, DX 9_3 Memory 32-bit DDR3/DDR3L/LPDDR3/LPDDR2 SLC/MLC/TLC/EF NAND with 64-bit ECC eMMC V4.5 Video 1080p@60fps video playback multi-format video playback, including H.264, MPEG1/2, MPEG4 SP/ASP GMC, H.263 including Sorenson Spark, WMV9/VC-1, JPEG/MJPEG, etc H.264 1080p@60fps or 720p@120fps video capture Display LVDS up to 1366×768@60fps or RGB LCD up to 2048×1536@60fps 4-lane MIPI DSI up to 1920×1200@60fps HDMI up to 1080p@60fps, HDCP V1.2 supported Dual display supported with LCD up to 720p@60fps and […]