Allwinner H-Series Category - Page 5 of 35 - CNX Software

September 17, 2022 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Yuzuki Chameleon – A Raspberry Pi Model A shaped SBC with Allwinner H616 CPU

Yuzuki Chameleon is an open-source hardware single board computer powered by an Allwinner H616 quad-core Cortex-A53 processor that somewhat follows the shape of Raspberry Pi 3 Model A+ SBC with a different port layout that should still keep mechanical and electrical compatibility with some Raspberry Pi HATs. The board supports up to 2GB RAM, up to 128GB eMMC flash, features a MicroSD card slot, one 4K-capable HDMI 2.0 port, an audio jack, four USB Type-C ports to keep the design as slim as possible, as well as a wireless module for WiFi and Bluetooth and a connector to optionally add Fast Ethernet through an external module. Yuzuki Chameleon specifications: SoC – Allwinner H616 quad-core Cortex-A53 processor @ with Arm Mali G31 GPU, 6Kp30/4Kp60 video decoder System Memory – Up to 2GB RAM Storage – Up to 128GB eMMC flash storage, MicroSD card socket Video Output – HDMI 2.0 up to […]

August 30, 2022October 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MangoPi MQ Quad SBC – Allwinner H616 meets Raspberry Pi Zero W form factor

MangoPi MQ Quad is an Allwinner H616 quad-core Arm Cortex-A53 SBC following Raspberry Pi Zero W form factor, and the company’s earlier MangoPi MQ Pro RISC-V SBC featuring the Allwinner D1 processor. The MangoPi MQ Quad also comes with 1GB RAM, a mini HDMI output, two USB Type-C ports, WiFI 4 and Bluetooth connectivity, a microSD card, as well a 40-pin Raspberry Pi-compatible GPIO header and an FPC connector with USB, Ethernet, and more GPIOs for expansion. MangoPi MQ Quad specifications: SoC – Allwinner H616 quad-core Cortex-A53 @ 1.5GHz with Mali-G31 MP2 GPU with OpenGL 3.2, Vulkan 1.1, OpenCL 2.0 API support System Memory – 1GB DDR3L Storage – MicroSD card slot, a footprint for SPI flash (on the bottom of the board) Video Output – Mini HDMI 2.0 port up to 4Kp60 Connectivity – 802.11 b/g/n WiFi 4 and Bluetooth 4.2 via RTL8723DS; ceramic and u.FL antennas included USB […]

August 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

$29 Inovato Quadra Arm mini PC runs Armbian on Allwinner H6 processor

Inovato Quadra is an Arm Linux mini PC based on Allwinner H6 quad-core Cortex-A53 processor with 2GB RAM, 16GB flash, and running Armbian-built Debian 11 Bullseye 64-bit. If the device looks like a repurposed Android TV box, it is because it is based on the T95 Mini model with one HDMI 2.0 port, USB 3.0 and 2.0 ports, a microSD card slot, a Fast Ethernet port and WiFi 4 wireless connectivity. Inovato Quadra specifications: SoC – Allwinner H6 quad-core Arm Cortex-A53 processor @ up to 1.7 GHz with Arm Mali-720 MP2 GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, MicroSD card slot Video & Audio Output HDMI 2.0 port up to 4Kp60 3.5mm AV port with video composite and analog audio Networking 10/100M Ethernet port Wireless Quadra – 2.4 GHz 802.11n Wi-Fi 4, no Bluetooth (can be added with a USB dongle) Quadra Plus – Dual-band 802.11ac […]

August 2, 2022August 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Transpeed P10 Android 10 Full HD projector features Allwinner H700 SoC

Transpeed P10 Full HD Android 10 projector

Allwinner H700 is a “new” processor that has found its way into Transpeed P10 Full HD “portable” projector running Android 10. It is sold on Aliexpress for $125 including shipping. Allwinner H700 happens to be yet another derivative of Allwinner H616/H618 quad-core Corex-A53 processor, but adds an RGB LCD interface up to 1080p60 and video input interfaces that make it suitable for projector and smart displays. The processor also has two Ethernet interfaces (1x Gigabit and 1x 10/100M) like the H616, but no built-in PHY, so an additional Ethernet transceiver is needed on the board. Let’s first have a look a the Transpeed P10 projector specifications: SoC – Allwinner H700 quad-core Arm Cortex-A53 processor @ 1.5GHz with Arm Mali-G31 mp2, 6K video decoder, and 4Kp25 H.264 video encoder System Memory – 2GB RAM Storage – 16GB eMMC flash Projector 1920×1080 native resolution LED bulb Brightness – 120 ANSI Lumens Projection […]

August 1, 2022August 1, 2022 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Linux 5.19 Release – Main changes, Arm, RISC-V and MIPS architectures

Linus Torvalds has just announced the release of Linux 5.19. It should be the last 5.xx version, with Linux 6.0 coming for the next cycle: So here we are, one week late, and 5.19 is tagged and pushed out. The full shortlog (just from rc8, obviously not all of 5.19) is below, but I can happily report that there is nothing really interesting in there. A lot of random small stuff. In the diffstat, the loongarch updates stand out, as does another batch of the networking sysctl READ_ONCE() annotations to make some of the data race checker code happy. Other than that it’s really just a mixed bag of various odds and ends. On a personal note, the most interesting part here is that I did the release (and am writing this) on an arm64 laptop. It’s something I’ve been waiting for for a _loong_ time, and it’s finally reality, […]

July 30, 2022July 31, 2022 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Allwinner H618 processor powers Android 12 TV boxes

Allwinner H618 processor has started to show up in several TV boxes running Android 12, and capable of playing 6K/4K VP9 and H.265 videos with devices such as T95Z Plus and T95 Max, which may be confusing, as companies are reusing those model numbers over and over. Featuring a quad-core Cortex-A53 processor, an Arm Mali-G31 MP2 GPU, and 6K video support, the Allwinner H618 looks exactly like the Allwinner H616 processor except it can run the more recent Android 12 operating system. There’s not much public information about Allwinner H618 at the time of writing, but let’s check T95Z Plus specifications to see if we can find any other new hidden features: SoC – Allwinner H618 quad-core Arm Cortex-A53 processor @ up to 1.5GHz with Arm Mali-G31 MP2 GPU System Memory – 2GB or 4GB RAM Storage – 16GB, 32GB, or 64GB eMMC flash, MicroSD card socket Video Output HDMI […]

July 18, 2022July 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Libre Computer ROC-RK3328-CC now supports Ubuntu 22.04 with Linux 5.18.2

Libre Computer’s latest Ubuntu 22.04 desktop and server images for ROC-RK3328-CC board are based on Linux mainline, namely Linux 5.18.2, and other boards from the company, based on Allwinner H2+/H5 processor or Amlogic S905X, have gotten the same treatment. Some companies will churn out boards regularly but provide limited software support. Libre Computer seems to have taken a different approach, as they released most of their board in 2017 and 2018, starting with AML-S905X-CC “Le Potato” board based on the Amlogic S905X processor, followed by ALL-H3-CC “Tritium” SBC with Allwinner H2+, H3, or H5 processor, and finally ROC-RK3328-CC “Renegade” board, but still release updated OS images in 2022. I reviewed ROC-RK3328-CC SBC with Debian 9 and Ubuntu 18.04 using Linux 4.4 in July 2018, and four years later, you might have thought such boards could have become abandonware, but Libre Computer just released Ubuntu 22.04 Desktop and Server image with […]

May 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 5.18 release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 5.18 is out! Linus Torvalds has just announced the release on lkml: No unexpected nasty surprises this last week, so here we go with the 5.18 release right on schedule. That obviously means that the merge window for 5.19 will open tomorrow, and I already have a few pull requests pending. Thank you everybody. I’d still like people to run boring old plain 5.18 just to check, before we start with the excitement of all the new features for the merge window. The full shortlog for the last week is below, and nothing really odd stands out. The diffstat looks a bit funny – unusually we have parsic architecture patches being a big part of it due to some last-minute cache flushing fixes, but that is probably more indicative of everything else being pretty small. So outside of the parisc fixes, there’s random driver updates (mellanox mlx5 stands out, […]