Allwinner H-Series Category - Page 34 of 35 - CNX Software

June 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Tronsmart Draco H3 TV Stick Firmware and SDK Released

Tronsmart Draco H3 is a low cost HDMI TV stick powered by Allwinner H3 quad core processor. At $35, the device costs about $5 more than Amlogic S805 based sticks like MK808B Plus with about the same specs (quad core Cortex A7/A5, 1GB RAM, 8GB flash, HDMI out..), but with the added benefit of 4K @ 30Hz support. Tronsmart has now released some firmware files as well as Linux kernel and an Android SDK. Two firmware files have been released: Tronsmart_Draco_H3_720p_Kernel_20150526.zip – Firmware with 1280×720 framebuffer for better performance Tronsmart_Draco_H3_1080p_Kernel_20150526.zip – Firmware with 1920×1080 framebuffer for higher resolution Please note that the resolution will only affect the user interface, and when you play videos you should get the resolution selected in Android settings. So if you play a 4K videos it will truly show as a 4K video on your TV, even though the user interface is only 720p, at […]

June 8, 2015June 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

$59 Zidoo X1 Android TV Box Powered by Allwinner H3 SoC

Allwinner H3 based Android TV boxes have been selling for a few months for $80 or less, and Draco H3 HDMI TV stick even goes for just $35. Zidoo has been working on their own Allwinner H3 platform called Zidoo X1 for a little while, and they are about to launch it for $59 (MSRP). Zidoo X1 specifications: SoC – Allwinner H3 quad core ARM Cortex A7 @ 1.5GHz with quad core Mali-400MP2 @ 600 MHz System Memory – 1 GB DDR3 Storage – 8 GB NAND flash (16GB in option) + micro SD slot up to 32GB Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi Video Output – HDMI up to 4K2K @ 30Hz, AV Audio Output – HDMI, AV, and optical S/PDIF Video Codec – H.265/HEVC up to 4K30, 1080p60 decoding for H.264, VP8, MPEG-1/2, MPEG-4, H.263. WMV9, VC1, etc… USB – 2x USB 2.0 host ports Misc – […]

May 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Allwinner H3 Based Orange Pi 2 Board Price Drops to as Low As $25

As Raspberry Pi Model B+ price got reduced to $25, some competitors also decided to bring their price down. Shenzhen Xunlong Software, the maker of Orange Pi board, decided to decrease their Orange Pi 2 and Orange Pi 2 Mini boards by $5 to respectively $30 and $25 plus around $2 shipping. Both boards are based on the same PCB, but the mini version lacks WiFi. Let’s refresh our memory with the specs: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with 256KB L1 cache, 1MB L2 cache, and an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI (CEC and HDCP support), AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek module, not found on mini version) USB – 4x USB […]

May 12, 2015May 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Orange Pi Plus (Allwinner H3) Firmware Images and Linux SDK Released

Orange Pi Plus is a development board based on the new Allwinner H3 quad core Cortex A7 processor that supports 4K video output and decoding. The boards comes with 1GB RAM, 8GB eMMC, HDMI output, Gigabit Ethernet, Wi-Fi, SATA and more, and sells for $49 on Aliexpress. When I first covered the board in February, it was already listed on Aliexpress, but I could not find any firmware image, or source code, but this has now changed. There are now four firmware files: Lubuntu_1404_For_OrangePiplus_v0_8_0_.img.xz – Lubuntu 14.04 image Raspbian_For_OrangePiplus_v0_8_0.img.xz – Raspbian for Allwinner H3 orangepi-plus-debian-server-card-v0.9.img.xz – A Debian server image sun8iw7p1_android_orangepi-plus_uart0.rar – Android 4.4.2 image that needs to be flash with PhoenixCard in Windows (Linux tools are not working yet) Beside the firmware images, the company also releases a Linux SDK (h3-lichee-1.0.tar.gz) with Linux 3.4 kernel source code, u-boot, and relevant tools. I assume these should also work on Orange […]

April 24, 2015April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Tronsmart Draco H3 is a Low Cost HDMI TV Stick based on Allwinner H3 SoC

Allwinner H3 was unveiled as a quad core processor for 4K media players that would sell for less than $50, but so far devices like TVPP0030 are selling for an unattractive $80, but this may be about to change thanks to devices like Tronsmart Draco H3 HDMI TV stick that are expected to sell between $30 to $40 retail, possibly excluding shipping, and it would then compete against Amlogic S805 platforms such as MK808B Plus that only support 1080p video decoding and output. Preliminary specifications for Tronsmart Draco H3: SoC – Allwinner H3 quad core ARM Cortex A7 @ 1.5GHz with quad core Mali-400MP2 @ 600 MHz System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash + micro SD slot Connectivity – 802.11 b/g/n Wi-Fi with external antenna, and Bluetooth 4.0 (AP6212 module) Video & Audio Output – HDMI 1.4 male connector up to 4K2K @ 30Hz, with […]

April 15, 2015April 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Allwinner H-Series OTT SoC Roadmap Adds H5 and H2+ Processors

Previously Allwinner only had A-Series processor such as A10 that were used in tablets and media players, but they’ve recently launch H-series processors for “Home entertainment” such as H64, H8 or H3 SoCs that have been specifically designed for media players and OTT (Over-the-top) boxes. The company has unveiled its OTT SoC roadmap at the Hong Kong Electronics Fair which adds two new processors Allwinner H2 and Allwinner H5. Allwinner H2+ will a quad core Cortex A7 processor support H.265 video decoding, 1080p decoding, and TrustZone support, and should the cheapest processor of the family. Based on the chart above, the processor must have been sampling by the end of last year, so H2+ media players should come to market very soon. Allwinner H5 will be at the other end of the scale, featuring eight Cortex A53 cores, a 4K H.265 decoder, an H.265 encoder (1080p?), and TrustZone support as […]

March 23, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Allwinner CedarX Media Codec Library GPL/LGPL Compliance Update

Last month, I wrote about potential open source licenses and VP6 copyright infringement by Allwinner with their CedarX media codec library, and then since there’s been a few developments. First, Allwinner sent me an email saying they’ve now updated Cedarx library and referring my previous article. Here’s an extract: Here, I have some update of the Allwinner’s open-source status. We have done a lot of discussion with the developers from the linux-sunxi communication about the software license of CedarX. For each question or requirement asked by the developers, Allwinner has identify and try to give the best solution. Now, we believe Allwinner’s CedarX license is fully compliant and resolves concerns from the community. And you can take the announcement https://www.mail-archive.com/[email protected]/msg10597.html as a reference. Allwinner is always supporting the open-source, and try to do better and better. You can see some update on the github https://github.com/allwinner-zh, and some feedback from developers: […]

March 21, 2015March 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Orange Pi 2 Allwinner H3 Quad Core Development Board Sells for $35

After Orange Pi Plus development board powered by Allwinner H3 quad core cortex A7 processor, the company has decided to launch a lower cost version of their Allwinner H3 board with Orange Pi 2, that has started selling for a compelling $35 + about $4 shipping worldwide, and provides another sub-$50 alternative to Raspberry Pi 2, ODROID-C1, and Radxa Rock Lite boards. Orange Pi 2 board specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with 256KB L1 cache, 1MB L2 cache, and an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek module) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin […]