Allwinner H-Series Category - Page 27 of 35 - CNX Software

August 17, 2016August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Allwinner H5 is a Quad Core Cortex A53 Processor for 4K OTT TV Boxes

Last year, we found that Allwinner was preparing to launch Allwinner H64 and H5 quad and octa processors in their roadmap, but there have been some changes, and the compny seems to have dropped H64 name, and has now introduced Allwinner H5 quad core Cortex A53 processor designed for 4K TV boxes. Allwinner H5 main specifications: CPU – quad core Cortex A53 with NEON, FPU, 64KB I/D cache per core, and 512KB L2 cache 3G GPU – ARM Mali-450MP GPU with 4 pixel processor cores, and 2 geometry cores with support for OpenGL ES 2.0/1.1/1.1, OpenVG 1.1 and EGL 2D GPU (Graphics and Display Processor) – Dual display; Main display: 4 video layers, 12 graphics layers, 4 alpha blending channels; Auxiliary display: 4 video layers, 4 graphics layers, and 2 alpha blending channels Memory I/F – DDR3/3L SDRAM interface up to 32-bit data width Storage I/F – SPI NOR flash, […]

July 25, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.7 Release – Main Changes, ARM and MIPS Architectures

Linux 4.7 is out: So, after a slight delay due to my travels, I’m back, and 4.7 is out. Despite it being two weeks since rc7, the final patch wasn’t all that big, and much of it is trivial one- and few-liners. There’s a couple of network drivers that got a bit more loving. Appended is the shortlog since rc7 for people who care: it’s fairly spread out, with networking and some intel Kabylake GPU fixes being the most noticeable ones. But there’s random small noise spread all over. And obviously, this means that the merge window for 4.8 is open.Judging by the linux-next contents, that’s going to be a bigger release than the current one (4.7 really was fairly calm, I blame at least partly summer in the northern hemisphere). Linus Linux 4.6 brought USB 3.1 superspeed, OrangeFS distributed file system, 802.1AE MAC-level encryption (MACsec), and BATMAN V protocol support, improved […]

July 22, 2016July 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

FriendlyARM NanoPi NEO Board Benchmarks

We’ve already seen how to setup NanoPi NEO with Ubuntu Core, and while it’s mostly designed as an IoT node, for example to control relays over Ethernet or the Internet, I’ve still decided to see how it would perform under load by running Phoronix benchmarks, and then network and storage (micro SD card provided by FriendlyARM). It’s a small board, so we should expect it to heat a lot under load, especially it does not come with an heatsink by default. Also bear in mind that performance may dramatically change depending on the software implementation, and for the test, I’m using the company’s Ubuntu Core firmware. Before start the benchmark, I noticed that QTe-Demo was running in the background, probably because it was used on their other board with video output or LCD. but it’s taking some CPU usage, and is absolutely not needed here. To disable it, edit /etc/rc.local, […]

July 20, 2016July 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Getting Started with NanoPi NEO Development Board – Ubuntu Core Firmware

NanoPi NEO is an exciting ARM Linux board due to the power it packs into its small size, and its low price starting at $7.99. It’s made by FriendlyARM, and since I’ve read some people had never heard about the company before, I’d like to point out it has been providing development boards well before the Raspberry Pi board was launched, with products such mini2440 based on a Samsung ARM9 processor introduced around year 2010. Anyway, I asked the company if they were willing to send 2 samples for review, as I plan to remove the USB & Ethernet port on one of them. Instead I got a 4 boards and accessories, so I’m going to start reviewing the board by writing a quick start guide, showing how to setup it, and check out the Ubuntu core provided by the company. If you are a fan of armbian made Debian […]

July 15, 2016July 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

Orange Pi PC Board is now selling for $8.57 Shipped (Promo)

[update: the flash sale is over] Orange Pi PC is an ARM Linux development board based on Allwinner H3 processor, that is relatively popular thanks to its low price/features ratio, and decent Linux support mostly thanks to the combined work of linux-sunxi and armbian communities. The board normally sells for $15 + shipping on Aliexpress, but GearBest appears to have a promotion for $8.57 shipped. Before you go ahead with any purchase. You’ll notice the board is shown for $9.23 in China and US-LA warehouses, but $24.35 in their European warehouse. The price (china warehouse) goes down to $8.57 once you had it to the cart. It could be a genuine promotion, but it could also be a mistake. If the latter, you’ll get a refund or possibly a voucher of the same value for future purchases. I’ve asked my contact at GearBest, but no answer yet. GearBest confirmed it […]

July 7, 2016July 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 93 Comments

Smaller & Faster than Raspberry Pi Zero: Meet NanoPi NEO ARM Linux Development Board

Raspberry Pi Zero has two noticeable attributes compared to other Raspberry Pi boards: it’s smaller and it’s cheaper. FriendlyARM has now designed another model for their NanoPi family, that about 12% smaller, although not quite as thin at all due to its Ethernet jack and USB connector, and much faster than Raspberry Pi Zero, with NanoPi NEO board powered by Allwinner H3 quad core processor. NanoPi NEO specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 256 or 512 MB DDR3 Storage – micro SD card slot Connectivity – 10/100M Ethernet USB – 1x USB 2.0 host ports, 1x micro USB OTG port, 2x USB via headers Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin header with 2x USB, IR pin, microphone and Line OUT signals Debugging – 4-pin […]

June 17, 2016June 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

S204 Android Set-top box with DVB-T2/C & DVB-S2 Tuners is Powered by Allwinner H3 Processor

So far, I had only seen Android TV box with digital TV tuner using Amlogic or HiSilicon solutions, but S204 Android set-top box differs, as it is powered by Allwinner H3 quad core Cortex A7 processor, and includes DVB-T2/C (Terrestrial and cable TV) and DVB-S2 (satellite TV) tuners. AFAIK, Allwinner H3 does not include any TS interfaces, so they must have used USB tuner chip(s) [Update: Allwinner H3 does have a Transport Stream interface as per the datasheet, but it’s not really advertised by Allwinner] S204 TV box specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2/1.3 GHz with Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz + AV (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Tuners Support HD DVB-S2, DVB-T2 and DVB-C; Support for BISS,CCCAM, […]

June 9, 2016June 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Orange Pi PC Plus Quad Core Development Board with 1GB RAM, 8GB eMMC flash Sells for $20

Most low cost development boards do not include internal storage in order to decrease costs, and instead require their users to flash their preferred operating system on (micro) SD card. This makes it easy to get started, but many micro SD cards often suffer from poor random I/O performance, even for Class 10 or greater card, leading to a poor user experience compared to what you’d get with an eMMC flash. Shenzhen Xunlong has released yet another Allwinner H3 board, namely Orange Pi PC Plus, similar to Orange Pi PC but adding WiFi, and 8GB eMMC flash. Orange Pi PC Plus specifications with main change with Orange Pi PC highlighted in bold: SoC – Allwinner H3 quad core Cortex A7 @ 1.3 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI […]