Allwinner H-Series Category - Page 27 of 35 - CNX Software

July 20, 2016July 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Getting Started with NanoPi NEO Development Board – Ubuntu Core Firmware

NanoPi NEO is an exciting ARM Linux board due to the power it packs into its small size, and its low price starting at $7.99. It’s made by FriendlyARM, and since I’ve read some people had never heard about the company before, I’d like to point out it has been providing development boards well before the Raspberry Pi board was launched, with products such mini2440 based on a Samsung ARM9 processor introduced around year 2010. Anyway, I asked the company if they were willing to send 2 samples for review, as I plan to remove the USB & Ethernet port on one of them. Instead I got a 4 boards and accessories, so I’m going to start reviewing the board by writing a quick start guide, showing how to setup it, and check out the Ubuntu core provided by the company. If you are a fan of armbian made Debian […]

July 15, 2016July 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

Orange Pi PC Board is now selling for $8.57 Shipped (Promo)

[update: the flash sale is over] Orange Pi PC is an ARM Linux development board based on Allwinner H3 processor, that is relatively popular thanks to its low price/features ratio, and decent Linux support mostly thanks to the combined work of linux-sunxi and armbian communities. The board normally sells for $15 + shipping on Aliexpress, but GearBest appears to have a promotion for $8.57 shipped. Before you go ahead with any purchase. You’ll notice the board is shown for $9.23 in China and US-LA warehouses, but $24.35 in their European warehouse. The price (china warehouse) goes down to $8.57 once you had it to the cart. It could be a genuine promotion, but it could also be a mistake. If the latter, you’ll get a refund or possibly a voucher of the same value for future purchases. I’ve asked my contact at GearBest, but no answer yet. GearBest confirmed it […]

July 7, 2016July 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 93 Comments

Smaller & Faster than Raspberry Pi Zero: Meet NanoPi NEO ARM Linux Development Board

Raspberry Pi Zero has two noticeable attributes compared to other Raspberry Pi boards: it’s smaller and it’s cheaper. FriendlyARM has now designed another model for their NanoPi family, that about 12% smaller, although not quite as thin at all due to its Ethernet jack and USB connector, and much faster than Raspberry Pi Zero, with NanoPi NEO board powered by Allwinner H3 quad core processor. NanoPi NEO specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 256 or 512 MB DDR3 Storage – micro SD card slot Connectivity – 10/100M Ethernet USB – 1x USB 2.0 host ports, 1x micro USB OTG port, 2x USB via headers Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin header with 2x USB, IR pin, microphone and Line OUT signals Debugging – 4-pin […]

June 17, 2016June 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

S204 Android Set-top box with DVB-T2/C & DVB-S2 Tuners is Powered by Allwinner H3 Processor

So far, I had only seen Android TV box with digital TV tuner using Amlogic or HiSilicon solutions, but S204 Android set-top box differs, as it is powered by Allwinner H3 quad core Cortex A7 processor, and includes DVB-T2/C (Terrestrial and cable TV) and DVB-S2 (satellite TV) tuners. AFAIK, Allwinner H3 does not include any TS interfaces, so they must have used USB tuner chip(s) [Update: Allwinner H3 does have a Transport Stream interface as per the datasheet, but it’s not really advertised by Allwinner] S204 TV box specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2/1.3 GHz with Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz + AV (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Tuners Support HD DVB-S2, DVB-T2 and DVB-C; Support for BISS,CCCAM, […]

June 9, 2016June 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Orange Pi PC Plus Quad Core Development Board with 1GB RAM, 8GB eMMC flash Sells for $20

Most low cost development boards do not include internal storage in order to decrease costs, and instead require their users to flash their preferred operating system on (micro) SD card. This makes it easy to get started, but many micro SD cards often suffer from poor random I/O performance, even for Class 10 or greater card, leading to a poor user experience compared to what you’d get with an eMMC flash. Shenzhen Xunlong has released yet another Allwinner H3 board, namely Orange Pi PC Plus, similar to Orange Pi PC but adding WiFi, and 8GB eMMC flash. Orange Pi PC Plus specifications with main change with Orange Pi PC highlighted in bold: SoC – Allwinner H3 quad core Cortex A7 @ 1.3 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI […]

June 9, 2016June 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

CX-V3 Android VR Headset based on Allwinner H8vr Platform Sells for $130

We’ve already seen that Allwinner intended to enter the virtual reality market with their H8vr, V9 and V10 All-in-One Android VR solutions, and at least one H8vr headset is now available for sale with CX-V3 VR headset with a full HD display, also called V3 that selling for $129.99 on GeekBuying, or as low as $99.99 if you are lucky enough to win a coupon. CX-V3 All-in-One VR headset specifications: SoC – Allwinner H8 octa core Cortex A7 processor @ 2.0 GHz with PowerVR SGX544 GPU @ 700 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot Display – 5.5″ 1920×1080 resolution Lenses 2x optical lenses that work for people with myopia under 64 mm Diameter – 43mm 100 degrees field of view (FOV) 46mm IPD (interpupillary distance) adjustment Connectivity – 802.11 b/g/n WiFi and Bluetooth 4.0 (Ampak AP6212) Audio Output – 3.5 mm […]

June 8, 2016June 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 47 Comments

Allwinner H3 Boards Comparison Tables with Orange Pi, Banana Pi M2+, NanoPi P1, and H3-OlinuXino-NANO Boards

Allwinner H3 SoC has now found its way into many low cost development boards, including several Orange Pi Boards, Banana Pi M2+, NanoPi M1, and Olimex H3-OlinuXino-NANO, and it might be difficult to choose among the list of boards available, so tkaiser has written a buyer’s guide for boards supported by Armbian, with some of the key differentiating factors, and on my side, I thought it might be a good idea to draw a comparison table between the boards. Since a table with 10 boards would be hard to read, I made two tables: one with boards with 512 MB RAM + Orange Pi PC / PC Plus, and a second table with higher end boards with 1 to 2 GB RAM, and more features. But first let’s talk about Allwinner H3 SoC since it’s common to all boards. It’s a quad core Cortex A7 processor clocked at up to […]

May 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Allwinner Virtual Reality 2016 – 2017 Roadmap: H8vr, VR9 and VR10 Solutions

Virtual reality has gotten a lot of hype in the last year or so, and so far there’s basically three ways to implement virtual reality: smartphone + VR headset, all-in-one headset, and PC + headset. Currently the former is the most popular option as it’s much cheaper than the other two, while PC based virtual reality provides the best user experience, but it’s quite pricey. Allwinner is now at Computex 2016 promoting their virtual reality solutions, and they see smartphone based VR peak in 2018, PC based VR have a slower growth, with All-in-one VR becoming the dominant force in 2020 and beyond. So the company is focusing on all-in-one Android VR headsets, starting with H8vr board featuring Allwinner H8 octa-core processor with 2GB RAM and 16GB storage, and mainly targeting 4K virtual reality videos, since the performance of current mobile processors does not really provide a good experience for […]