Allwinner H-Series Category - Page 17 of 35 - CNX Software

November 30, 2017November 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

ZeroShell Firewall/Router Linux Distribution Works on x86 Hardware, Raspberry Pi 2/3, & (Some) Orange Pi Boards

We’ve just seen pfSense is now available for Arm via firewall appliances such as Netgate SG-3100, but AFAIK there’s no pfSense community Arm firmware images yet. Several Arm SoCs & boards are now supported by FreeBSD, so in theory pfSense could be ported to those, but the page on FreeBSD does not seem to have been updated for a while. If you want a firewall distributions with an easy-to-user web interface like pfSense, but that also works on cheaper Arm hardware, Linux based ZeroShell distribution could be worth a try, as beside working on Intel & AMD x86 platforms, the developers also provides images for Raspberry Pi 2 & 3 boards, and several Orange Pi boards, namely Orange Pi R1, Orange Pi Zero, Orange Pi PC, and Orange Pi Plus/Plus2. The latter is the only supported Arm board with Gigabit Ethernet. Some of ZeroShell features include: Load Balancing and Failover of […]

November 27, 2017November 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Armbian v5.35 Released with Linux 4.13, U-boot v2017.09, New Boards Support

Armbian v5.35 has been released last Friday as a major update that brings Linux mainline kernel to version 4.13, U-Boot mainline to version v2017.09, adds support for 7″ Raspberry Pi display, Realtek WiFi drivers (mainline), and new stable hardware support for NanoPi Duo, Pinebook, and Orange Pi R1. Some other boards got experimental support, including Le Potato, NanoPi NEO 2, Orange Pi Zero Plus, Orange Pi Zero Plus 2 (H5). The desktop version of the images gets a full featured XFCE terminal, OpenVPN connector, a new wallpaper, and various other changes and fixes. armbian-config is normally used to configure the board for example networking configuration, but the utility has become even more useful with support for Hotspot, Bluetooth, SSH server configuration, swtich between stable & beta builds and between kernel applications, adds the ability to start an RDP server, and install third party software such as SAMBA, OpenMediaVault, PiHole, Transmission […]

November 27, 2017March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

Amlogic S905X vs Rockchip RK3328 vs Allwinner H6 Processors – Benchmarks & Features Comparison

Rockchip, Amlogic, and Allwinner are all battling for the lower and mid-range segments of the TV box market, so it may be interesting to compare their solutions. We won’t look into the ultra low-end market with 32-bit ARM Cortex A7 processor, but instead compare some of the recent quad-core 64-bit ARM Cortex A53 processor for 4K HDR TV box from the company with respectively Amlogic S905X, Rockchip RK3328, and Allwinner H6 SoCs. We’ll compare some of the benchmarks obtained with Android TV boxes, as well as other features like video support, USB, and Ethernet interfaces. S905X vs RK3328 vs H6 Benchmarks Let’s start with results for popular Android benchmarks: Antutu 6.x, Vellamo 3.x, and 3DMark Ice Storm Extreme v1.2 with results obtained from 3 TV boxes: Mini M8S II (Amlogic S905X), A95X R2 (Rockchip RK3328), and Zidoo H6 Pro (Allwinner H6). A score is highlighted in green is there’s a […]

November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Allwinner H6 Datasheet and User Manual Released

Putting aside the ill-fated Allwinner A80 SoC, Allwinner H6 is the first Allwinner processor with multiple high speed interfaces such as Gigabit Ethernet, USB 3.0 and PCIe, and also support 4K HDR with the company’s Smart Color Engine for video processing. So far, it’s been found in some 4K HDR TV boxes such as Zidoo H6 Pro or Beelink GS1. We’ve already known Shenzhen Xunlong was working on Orange Pi 3 Plus board with the processor for a few months, but Pine64 appear to have joined the party, and will soon launch Pine64 H64 board according to their Wiki. No photos yet, but the company released various documents for the board including Allwinner H6 V200 datasheet (80 pages), and Allwinner H6 V200 user manual (965 pages). The documents should – for instance – allow sunxi-linux community to port drivers for the processor. Some corrections have been made to the first […]

November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

TECHBASE ModBerry M300 Linux IoT Gateway is Powered by NanoPi NEO Board

We’ve previously covered TECHBASE Modberry industrial automation gateways based on popular development boards such as Raspberry Pi 3, NanoPi M1 Plus, and Intel Cherry Trail’s UP board, and designed for applications such as PLC controllers or MODBUS gateway / router. The company has now launched a new version with Modberry M300 powered NanoPi NEO Allwinner H3 board. ModBerry M300 gateway specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU System Memory – 512 MB DDR3 RAM Storage – micro SDHC card slot Connectivity 10/100M Ethernet port Optional Wi-Fi (IEEE 802.11 b/g/n, speed up to 150 Mbps, 64/128-bit WEP, WPA, WPA2), LTE/3G modem, GPS module, ZigBee, Bluetooth, LoRa, Wireless M-Bus, Nb-IoT USB – 1x USB 2.0 host port, 2x USB 2.0 host header Expansion I/Os 2x DIO ports 1x RS-232, 1x RS-485 1x 2-pin mBus master for up to 10 slave devices Optional […]

November 15, 2017November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$9+ Libre Computer Tritium Allwinner H2+/H3/H5 SBCs Leverage Raspberry Pi 3 Form Factor (Crowdfunding)

A few months ago, Libre Computer introduced Le Potato board (aka AML-S905X-CC) powered by Amlogic S905X processor plus up to 2GB RAM, and using Raspberry Pi 3 form factor. The company is now back with three Tritium boards, using the same form factor, but instead powered by Allwinner H2+, H3, or H5 processors, with a lower price point as the Tritium IoT board (H2+ / 512 MB RAM) goes for $9 only. Tritium boards (ALL-H3-CC) specifications: SoC and Memory Tritium IoT – Allwinner H2+ quad core Cortex A7 processor with Mali-400MP2, 512MB DDR3 Tritium 1GB – Allwinner H3 quad core Cortex A7 processor with Mali-400MP2, 1GB DDR3 Tritium 2GB – Allwinner H5 quad core Cortex A53 processor with Mali-450MP4, 2GB DDR3 Storage – 1x micro SD Card slot, eMMC module connector Video & Audio Output Tritium IoT – HDMI up to 1080p60, AV port Tritium 1GB & 2GB – HDMI 1.4 […]

November 13, 2017November 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.14 Release – Main Changes, ARM & MIPS Architecture

Linus Torvalds has announced the release of Linux 4.14: No surprises this week, although it is probably worth pointing out how the 0day robot has been getting even better (it was very useful before, but Fengguang has been working on making it even better, and reporting the problems it has found). Sure, some of the new reports turned out to be just 0day doing things that just don’t work (ie KASAN with old gcc versions, but also doing things like loading old ISA drivers in situations that just don’t make sense – remember when you couldn’t even ask if the hardware existed or not, and just had to know), but even then it’s been all good. The appended shortlog is obviously only for the (small) haul since rc8, and it really is tiny. Not very many commits, and they are small. The biggest thing that stands out in the diffstat […]

November 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Zidoo H6 Pro (Allwinner H6) TV Box Review – Part 2: Android 7.0 Firmware

Zidoo H6 Pro is the very first Allwinner H6 based 4K TV box. The Android 7.0 device support H.265, H.264 and VP6 4K video decoding, comes with fast interfaces such as USB 3.0, and network connectivity with Gigabit Ethernet and 802.11ac WiFi. I’ve already checkout the hardware in the first part of the review entitled “Zidoo H6 Pro (Allwinner H6) TV Box Review – Part 1: Unboxing & Teardown“, and since then, I’ve had time to play with the TV box, and report my experience with Android 7.0 in this second part of the review. First Boot and OTA Firmware Update I’ve connected a USB keyboard and a USB dongle with RF dongles for an air mouse and gamepad on the two USB ports, a USB 3.0 hard drive to the single USB 3.0 ports, as well as HDMI and Ethernet cables before powering up the TV box. I also […]