Allwinner H-Series Category - Page 13 of 35 - CNX Software

January 19, 2019January 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Orange Pi 3 Allwinner H6 SBC Comes with GbE, USB 3.0, mPCIe

When Shenzhen Xunlong Software launched their first Allwinner H6 development board, Orange Pi One Plus, many were disappointed as the board did not make use of some of the key features of H6 processor like USB 3.0 or PCIe, and RAM was limited to 1GB. A couple of weeks later, the company introduced Orange Pi Lite2 board with 802.11ac WiFi, a USB 3.0 port, HDMI 2.0a output, but no Gigabit Ethernet, nor PCIe interface, and again only 1 GB LPDDR3 memory. The good news is we now get a full-featured Allwinner H6 SBC thanks to Orange Pi 3 equipped with up to 2GB RAM, an optional 8GB eMMC flash, Gigabit Ethernet, 802.11ac WiFi 5, four USB 3.0 ports, HDMI 2.0a, a mPCIe slot, and more. There are four variants of the Orange Pi 3 board with either 1 or 2 GB RAM, with or without eMMC flash that share the […]

January 12, 2019 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

tinyWiFi-5G is a NanoPi NEO Air Clone with 5 GHz WiFi

NanoPi NEO Air is a tiny Allwinner H3 board with 802.11 b/g/n WiFi connectivity that launched in 2016 for $17.99 and is now available as NanoPi NEO Air-LTS (Long Term Support) for $28 and up. A company – or group of software developers – called tinyDebian decided to create a clone based on NanoPi NEO Air design, but replacing the 2.4 GHz Ampak AP6212 802.11n WiFi + Bluetooth 4.0 LE module by a dual-band Realtek RTL8821CS module that supports 802.11 b/g/n/ac and Bluetooth 4.2 LE. Meet tinyWiFi-5G. NanoPi NEO Air comes with two different storage configuration (8GB or 32GB flash), but tinyDebian did not provide the full specifications of the board, so tinyWiFi-5G board specifications below are preliminary: SoC – Allwinner H3 quad-core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash + micro SD card slot Connectivity […]

December 26, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.20 Release – Main Changes, Arm and MIPS Architectures

After Greg K-H handling Linux 4.19 release, Linus Torvalds is back at the helm, and released Linux 4.20 just before Christmas: Let’s face it, last week wasn’t quite as quiet as I would have hoped for, but there really doesn’t seem to be any point to delay 4.20 because everybody is already taking a break. And it’s not like there are any known issues, it’s just that the shortlog below is a bit longer than I would have wished for. Nothing screams “oh, that’s scary”, though. And as part of the “everybody is already taking a break”, I can happily report that I already have quite a few early pull requests in my inbox. I encouraged people to get it over and done with, so that people can just relax over the year-end holidays. In fact, I probably won’t start pulling for a couple of days, but otherwise let’s just […]

November 13, 2018November 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Tanix TX6 Allwinner H6 4K TV Box with 4GB RAM, Dual Band WiFi Goes for $43 (Promo)

Low cost Allwinner H6 TV boxes are now a thing, after the $40 EACHLINK H6 Mini TV box we covered last month, here’s another model slightly more expensive but with 4GB RAM instead of 3GB, and dual band WiFi. It does however drops the AV port found in EACHLINK model. Tanix TX6 can now be found on GearBest or Banggood for $42.99 and up. Tanix TX6 specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K @ 30 fps VP9 Profile 0/2, up to 4K @ 30fps H264/AVC BP/MP/HP@level5.1, MVC, up to […]

October 25, 2018 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

EACHLINK H6 Mini Allwinner H6 TV Box Sells for $39.99 (Promo)

Allwinner H6 TV box SoC was announced last year with some interesting specifications with a quad core Cortex A53 processor clocked at up to 1.8 GHz, 4K & 6K HDR video playback Gigabit Ethernet, USB 3.0, PCIe, etc… and was launched exclusively on Zidoo H6 Pro TV box, which delivered good performance and video playback capabilities, but at $99 was quite more expensive that RK3328 or Amlogic S905 based TV boxes. Lateron we started to find the processor in low cost development board such as Pine64 Pine H64 and Orange Pi One Plus, but I don’t think those become popular, and Allwinner H6 PCIe appears to have been botched. Nevetheless, Allwinner H6 is still a good platform for what i was designed for: TV boxes, and thanks to GearBest, it’s currently possible to purchase EACHLINK H6 Mini for just $39.99 including shipping. EACHLINK H6 Mini specifications: SoC – AllWinner H6 quad-core […]

October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Linux 4.19 Release – Main Changes, Arm and MIPS Architectures

With Linus Torvalds taking a leave from the Linux kernel project, Greg Kroah-Hartman was the one to release Linux 4.19 last Sunday: Hi everyone! It’s been a long strange journey for this kernel release… While it was not the largest kernel release every by number of commits, it was larger than the last 3 releases, which is a non-trivial thing to do. After the original -rc1 bumps, things settled down on the code side and it looks like stuff came nicely together to make a solid kernel for everyone to use for a while. And given that this is going to be one of the “Long Term” kernels I end up maintaining for a few years, that’s good news for everyone. A small trickle of good bugfixes came in this week, showing that waiting an extra week was a wise choice. However odds are that linux-next is just bursting so […]

October 22, 2018October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Tiny NanoPi Duo2 Board Comes with WiFi, a Camera Interface, an Optional 2G-IoT Dock

NanoPi Duo was launched last year as an ultra-cheap ($8+) Arm Linux board that fits into a breadboard. The board was powered by Allwinner H2+ processor coupled with 256 or 512MB RAM, and the infamous XR819 802.11b/g/n WiFi chip. FriendlyElec has now launched NanoPi Duo2, that’s still breadboard compatible, but with a slightly longer form factor, Allwinner H3 processor, 512 MB RAM, better WiFi thanks to an AP6212 module, and an extra camera interface. As we’ll see further below the company also developed a carrier board for 2G cellular IoT applications. NanoPi Duo2 specifications with highlights in bold showing differences again NanoPi Duo: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512 MB DDR3 SDRAM Storage – micro SD card slot, footprint for SPI flash Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212 module) with chip antenna, […]

September 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Sunvell H3 Allwinner H3 TV Box with 2GB RAM Sells for $27.99 (Promo)

There aren’t that many Allwinner H3 TV boxes with some models coming to mind being Zidoo X1 or Beelink X2, but of which appear to be phased out. If you are just looking for Android boxes, Amlogic S905X/S905W boxes are probably better options due to better support for video playback, but if you have desktop/server Linux in mind, then Allwinner H3 may be considered, and Beelink X2 used to be supported in Armbian, but is now EOS (End-of-Support). Nevertheless, it should still be possible to run Linux on Allwinner H3 TV boxes with some efforts, and GearBest now has a promotion for Sunvell H3 TV box which comes with 2GB RAM, 16GB flash, and sells for $27.99 plus some small shipping fee ($0.68 here). Sunvell H3 specifications: SoC – Allwinner H3 quad core Arm Cortex A7 with quad core Mali-400MP2 System Memory – 2 GB DDR3L Storage – 16 GB […]