Allwinner H-Series Category - Page 13 of 35 - CNX Software

November 13, 2018November 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Tanix TX6 Allwinner H6 4K TV Box with 4GB RAM, Dual Band WiFi Goes for $43 (Promo)

Low cost Allwinner H6 TV boxes are now a thing, after the $40 EACHLINK H6 Mini TV box we covered last month, here’s another model slightly more expensive but with 4GB RAM instead of 3GB, and dual band WiFi. It does however drops the AV port found in EACHLINK model. Tanix TX6 can now be found on GearBest or Banggood for $42.99 and up. Tanix TX6 specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K @ 30 fps VP9 Profile 0/2, up to 4K @ 30fps H264/AVC BP/MP/HP@level5.1, MVC, up to […]

October 25, 2018 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

EACHLINK H6 Mini Allwinner H6 TV Box Sells for $39.99 (Promo)

Allwinner H6 TV box SoC was announced last year with some interesting specifications with a quad core Cortex A53 processor clocked at up to 1.8 GHz, 4K & 6K HDR video playback Gigabit Ethernet, USB 3.0, PCIe, etc… and was launched exclusively on Zidoo H6 Pro TV box, which delivered good performance and video playback capabilities, but at $99 was quite more expensive that RK3328 or Amlogic S905 based TV boxes. Lateron we started to find the processor in low cost development board such as Pine64 Pine H64 and Orange Pi One Plus, but I don’t think those become popular, and Allwinner H6 PCIe appears to have been botched. Nevetheless, Allwinner H6 is still a good platform for what i was designed for: TV boxes, and thanks to GearBest, it’s currently possible to purchase EACHLINK H6 Mini for just $39.99 including shipping. EACHLINK H6 Mini specifications: SoC – AllWinner H6 quad-core […]

October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Linux 4.19 Release – Main Changes, Arm and MIPS Architectures

With Linus Torvalds taking a leave from the Linux kernel project, Greg Kroah-Hartman was the one to release Linux 4.19 last Sunday: Hi everyone! It’s been a long strange journey for this kernel release… While it was not the largest kernel release every by number of commits, it was larger than the last 3 releases, which is a non-trivial thing to do. After the original -rc1 bumps, things settled down on the code side and it looks like stuff came nicely together to make a solid kernel for everyone to use for a while. And given that this is going to be one of the “Long Term” kernels I end up maintaining for a few years, that’s good news for everyone. A small trickle of good bugfixes came in this week, showing that waiting an extra week was a wise choice. However odds are that linux-next is just bursting so […]

October 22, 2018October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Tiny NanoPi Duo2 Board Comes with WiFi, a Camera Interface, an Optional 2G-IoT Dock

NanoPi Duo was launched last year as an ultra-cheap ($8+) Arm Linux board that fits into a breadboard. The board was powered by Allwinner H2+ processor coupled with 256 or 512MB RAM, and the infamous XR819 802.11b/g/n WiFi chip. FriendlyElec has now launched NanoPi Duo2, that’s still breadboard compatible, but with a slightly longer form factor, Allwinner H3 processor, 512 MB RAM, better WiFi thanks to an AP6212 module, and an extra camera interface. As we’ll see further below the company also developed a carrier board for 2G cellular IoT applications. NanoPi Duo2 specifications with highlights in bold showing differences again NanoPi Duo: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512 MB DDR3 SDRAM Storage – micro SD card slot, footprint for SPI flash Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212 module) with chip antenna, […]

September 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Sunvell H3 Allwinner H3 TV Box with 2GB RAM Sells for $27.99 (Promo)

There aren’t that many Allwinner H3 TV boxes with some models coming to mind being Zidoo X1 or Beelink X2, but of which appear to be phased out. If you are just looking for Android boxes, Amlogic S905X/S905W boxes are probably better options due to better support for video playback, but if you have desktop/server Linux in mind, then Allwinner H3 may be considered, and Beelink X2 used to be supported in Armbian, but is now EOS (End-of-Support). Nevertheless, it should still be possible to run Linux on Allwinner H3 TV boxes with some efforts, and GearBest now has a promotion for Sunvell H3 TV box which comes with 2GB RAM, 16GB flash, and sells for $27.99 plus some small shipping fee ($0.68 here). Sunvell H3 specifications: SoC – Allwinner H3 quad core Arm Cortex A7 with quad core Mali-400MP2 System Memory – 2 GB DDR3L Storage – 16 GB […]

August 23, 2018August 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

MuxPi Board Relies on NanoPi NEO to Enable Remote Testing of Development Boards

Product development often occurs in different location over the world, there may be one team in Asia, and another in Europe and the US. At the beginning, the number of working samples for a board may be limited, so the project manager may have to decide who gets the boards since those may not be available to all teams. So it would be great if somehow there was a way to do remote testing of boards, so maybe the team in Asia could setup the testbed, used it during there time, and once they are back home, the US team can take over remotely to carry on their own development work on the hardware. That’s exactly what MuxPi board is all about. The solution provide remote access via the Ethernet port of a NanoPi NEO board, and connects to the DUT (Device under Test) via HDMI, Ethernet, USB and other […]

August 18, 2018August 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Linux Conference Europe & OpenIoT Summit Europe 2018 Schedule

Embedded Linux Conference OpenIOT Summit Europe 2018

The Embedded Linux Conference & OpenIoT Summit 2018 took place in March of this year in the US, but the European version of the events are now planned to take place on October 21-24 in Edinburg, UK, and the schedule has already been released. So let’s make a virtual schedule to find out more about some of interesting subjects that are covered at the conferences. The conference and summit really only officially start on Monday 22, but there are a few talks on Sunday afternoon too. Sunday, October 21 13:30 – 15:15 – Tutorial: Introduction to Quantum Computing Using Qiskit – Ali Javadi-Abhari, IBM Qiskit is a comprehensive open-source tool for quantum computation. From simple demonstrations of quantum mechanical effects to complicated algorithms for solving problems in AI and chemistry, Qiskit allows users to build and run programs on quantum computers of today. Qiskit is built with modularity and extensibility […]

August 13, 2018August 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.18 Release – Main Changes, Arm and MIPS Architecture

Linus Torvalds has just announced the release of Linux 4.18: One week late(r) and here we are – 4.18 is out there. It was a very calm week, and arguably I could just have released on schedule last week, but we did have some minor updates. Mostly networking, but some vfs race fixes (mentioned in the rc8 announment as “pending”) and a couple of driver fixes (scsi, networking, i2c). Some other minor random things (arm crypto fix, parisc memory ordering fix). Shortlog appended for the (few) details. Some of these I was almost ready to just delay to until the next merge window, but they were marked for stable anyway, so it would just have caused more backporting. The vfs fixes are for old races that are really hard to hit (which is obviously why they are old and weren’t noticed earlier). Some of them _have_ been seen in real […]