Allwinner H-Series Category - Page 12 of 35 - CNX Software

March 1, 2019March 1, 2019 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

PINE H64 Model B SBC Launched with Raspberry Pi Form Factor

Pine H64 development board was introduced about a year ago with an Allwinner H6 processor, 1 to 3GB RAM, Gigabit Ethernet, a USB 3.0 port, a PCIe socket, and more with the legacy Pine A64 form factor and price starting at $25.99 for the 1GB RAM version. However, Pine64 made a few announcements at FOSDEM 2019, and beside the upcoming Pinebook Pro Linux/*BSD laptop, the company also mentioned a new PINE H64 Model B, still based on Allwinner H6 processor, but instead following Raspberry Pi form factor also used by the company’s Rock64 SBC. The new board is still not available on the official Pine64 store, but Ameridroid is already taking orders for Pine H64 Model B for $38.95 (2GB RAM) and $48.95 (3GB RAM). Pine H64 Model B specifications: SoC – Allwinner H6 quad-core Arm Cortex-A53 processor @ 1.8GHz with Arm Mali T-722MP2 dual-core GPU supporting OpenGL ES 3.1/3.0/2.0/1.1, […]

February 20, 2019February 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi R1 is an Allwinner H3 Gateway with Dual Ethernet, WiFi and Bluetooth

A couple of years ago, Shenzhen Xunlong Software launched Orange Pi R1 board powered by Allwinner H2+ processor with two Fast Ethernet ports, and some I/Os which could be useful for intelligent controllers and simple IoT gateways. FriendlyElec has now launched a similar, but improved product with their NanoPi R1 featuring Allwinner H3 processor coupled with 512MB or 1GB memory, two Ethernet ports, WiFi and Bluetooth connectivity, packaged in a neat metal case. NanoPi R1 specifications: SoC – Allwinner H3 quad-core Arm Cortex-A7 processor @ up to 1.2GHz with Mali-400MP2 GPU System Memory – 512MB or 1GB DDR3 RAM Storage – MicroSD Slot, optional 8GB eMMC flash Connectivity 1x Gigabit Ethernet, 1x Fast Ethernet 802.11b/g/n WiFi 4 with SMA antenna interface Bluetooth 4.0 dual mode (Classic / LE) USB – 2x USB Type-A host ports, 1x micro USB OTG port Debugging – 3-pin 2.54mm pitch header for serial console Serial […]

February 20, 2019May 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Tanix TX6 Allwinner H6 TV Box Gets Android 9.0 Firmware

The first Android 9.0 TV boxes appeared a few months ago in some Rockchip RK3328 based models, Amlogic also showcased Android 9 Pie in S905X2 / S905Y2 TV box reference platforms, but so far I don’t think I had heard about Android 9.0 for Allwinner processors. But GeekBuying and Aliexpress are now listing Wechip / Tanix TX6 Allwinner H6 TV box previously launched with Android 7.1, with Android 9.0 Pie instead for $39 and up. Here’s a reminder of Tanix TX6 hardware specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K […]

February 9, 2019May 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 49 Comments

Wechip R69 Allwinner H3 TV Box goes for $19 Shipped

A few years ago, it was relatively easy to purchase sub $20 TV boxes with some patience, but with the increase in RAM and flash prices, it’s been more difficult to find those ultra-cheap TV boxes. It turns out there’s such a deal now on Aliexpress where Wechip R69 TV box is sold for just $18.99 shipped. Now with an Allwinner H3 processor, 1GB RAM, and 8GB flash, I would not necessarily recommend such device for your media needs, but they can be useful for some specific use cases like a simple digital signage, or even to run Linux with some efforts. Wechip R69 also looks to be similar to Sunvell R69 TV box that is officially supported by RetroOrangePi, but with the pin-to-pin compatible Allwinner H2 processor, so it could make an inexpensive retro gaming console as well. Wechip R69 specifications: SoC – Allwinner H3 quad-core Cortex A7 processor […]

January 31, 2019February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

Qihua CQH6 SoM – A Better Alternative to Raspberry Pi Compute Model 3+?

The Raspberry Pi Foundation just launched the Raspberry Pi Compute Module 3+ for $25 and up with Broadcom BCM2837B0 processor offering better thermals than BCM2837 processor. As is often the case, this post generated some insightful comments from the smart readers of CNX Software, and they pointed out some of the shortcomings of the module such as the lack of Ethernet support that would be required for cluster use cases for example. You can also add a USB to Ethernet chip to the carrier board, but that’s not ideal, and instead someone linked to Qihua CQH6 system-on-module powered by Allwinner H6 processor and sold for 158 RMB ($23.5 USD) or 199 RMB ($29.65) for respectively 512MB RAM/4GB flash and 1GB RAM/8GB flash configurations. Qihua CQH6 module specifications: SoC – Allwinner H6 quad-core Cortex A53 processor @ 1.8 GHz with Arm Mali-T720MP GPU System Memory – 512MB, 1GB or 2GB DDR3L […]

January 19, 2019January 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Orange Pi 3 Allwinner H6 SBC Comes with GbE, USB 3.0, mPCIe

When Shenzhen Xunlong Software launched their first Allwinner H6 development board, Orange Pi One Plus, many were disappointed as the board did not make use of some of the key features of H6 processor like USB 3.0 or PCIe, and RAM was limited to 1GB. A couple of weeks later, the company introduced Orange Pi Lite2 board with 802.11ac WiFi, a USB 3.0 port, HDMI 2.0a output, but no Gigabit Ethernet, nor PCIe interface, and again only 1 GB LPDDR3 memory. The good news is we now get a full-featured Allwinner H6 SBC thanks to Orange Pi 3 equipped with up to 2GB RAM, an optional 8GB eMMC flash, Gigabit Ethernet, 802.11ac WiFi 5, four USB 3.0 ports, HDMI 2.0a, a mPCIe slot, and more. There are four variants of the Orange Pi 3 board with either 1 or 2 GB RAM, with or without eMMC flash that share the […]

January 12, 2019 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

tinyWiFi-5G is a NanoPi NEO Air Clone with 5 GHz WiFi

NanoPi NEO Air is a tiny Allwinner H3 board with 802.11 b/g/n WiFi connectivity that launched in 2016 for $17.99 and is now available as NanoPi NEO Air-LTS (Long Term Support) for $28 and up. A company – or group of software developers – called tinyDebian decided to create a clone based on NanoPi NEO Air design, but replacing the 2.4 GHz Ampak AP6212 802.11n WiFi + Bluetooth 4.0 LE module by a dual-band Realtek RTL8821CS module that supports 802.11 b/g/n/ac and Bluetooth 4.2 LE. Meet tinyWiFi-5G. NanoPi NEO Air comes with two different storage configuration (8GB or 32GB flash), but tinyDebian did not provide the full specifications of the board, so tinyWiFi-5G board specifications below are preliminary: SoC – Allwinner H3 quad-core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash + micro SD card slot Connectivity […]

December 26, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.20 Release – Main Changes, Arm and MIPS Architectures

After Greg K-H handling Linux 4.19 release, Linus Torvalds is back at the helm, and released Linux 4.20 just before Christmas: Let’s face it, last week wasn’t quite as quiet as I would have hoped for, but there really doesn’t seem to be any point to delay 4.20 because everybody is already taking a break. And it’s not like there are any known issues, it’s just that the shortlog below is a bit longer than I would have wished for. Nothing screams “oh, that’s scary”, though. And as part of the “everybody is already taking a break”, I can happily report that I already have quite a few early pull requests in my inbox. I encouraged people to get it over and done with, so that people can just relax over the year-end holidays. In fact, I probably won’t start pulling for a couple of days, but otherwise let’s just […]