Allwinner A-Series Category - Page 17 of 53 - CNX Software

December 23, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$25 NanoPi A64 is a Compact Yet Features Packed Allwinner A64 Development Board

FriendlyARM has had a very busy year with their NanoPi boards, and they are completing the year by launching NanoPi A64 development board based on Allwinner A64 quad core Cortex A53 processor with 1GB RAM, Gigabit Ethernet, HDMI, USB ports and more. NanoPi A64 board specifications: SoC – Allwinner A64 quad-core Cortex-A53 @ 648MHz to 1.152GHz with an ARM Mali400 MP2 GPU System Memory – 1GB DDR3 RAM Storage – 1x micro SD slot Video Output / Display IF – HDMI 1.4 port, 30-pin MIPI DSI connector Audio – HDMI, 3.5mm audio jack Connectivity – 1x Gigabit Ethernet port (RTL8211E), 802.11 b/g/n WiFi USB – 2x USB 2.0 ports, 1x micro USB port for power only Camera – 24-pin DVP camera interface Debugging – 4-pin debug UART header Expansion 40-pin mostly Raspberry Pi compatible header with UART, SPI, I2C, PWM, GPIOs, etc… 7-pin I2S header Misc – IR Receiver, 1x […]

December 13, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Banana Pi BPI-M64 & BPI-M2 Ultra Boards PDF Schematics Published

SinoVoip has recently released PDF schematics for both of their Banana Pi boards, namely BPI-M64 board powered by Allwinner A64 processor, and BPI-M2 Ultra board based on the latest Allwinner R40 SoC with an on-chip SATA interface. For most boards on the market, this should not be news, but SinoVoip does not always release schematics in a timely manner, so you may want to be noticed when it happens: BPI-M64 schematics – https://bananapi.gitbooks.io/bpi-m64/content/en/bpi-m64schematicdiagram.html BPI-M2 Ultra schematics – https://bananapi.gitbooks.io/bpi-m2-ultra-open-source-single-board-computer/content/bpi-m2ultraschematicdiagram.html The clear benefit of BPI-M2 Ultra is the presence of a SATA connector NOT implemented via a slow USB 2.0 to SATA bridge, but instead directly through the SATA interface of the R40 quad core processor. As for BPI-M64 ($46), it can be compared to Pine64+ with 2GB RAM and a WiFi module ($39), and despite the higher price it does come with some benefits like adb over OTG working, it is […]

December 12, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.9 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux 4.9 on Sunday: So Linux 4.9 is out, and the merge window for 4.10 is thus open. With the extra week for 4.9, the timing for the merge window is obviously a bit awkward, and it technically closes in two weeks on Christmas Day. But that is a pure technicality, because I will certainly stop pulling on the 23rd at the latest, and if I get roped into Xmas food prep, even that date might be questionable. I could extend the merge window rather than cut it short, but I’m not going to. I suspect we all want a nice calm winter break, so if your stuff isn’t ready to be merged early, the solution is to just not merge it yet at all, and wait for 4.11. Just so you all know (I already bcc’d the main merge window suspects in a separate mailing last […]

November 24, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

PINEBOOK ARM Linux Laptop Powered by Allwinner A64 Processor to Sell for $89 and Up

Following up on Pine A64 board powered by Allwinner A64 quad core Cortex A53 processor, Pine64 has decided to work on a software compatible laptop based on the processor. PINEBOOK comes with 2GB RAM, 16 GB flash storage, a 11.6″ or 14″ display, and the usual ports you’d expect on such device. PINEBOOK specifications: SoC – Allwinner A64 quad core ARM Cortex A53 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 2GB DDR3L Storage – 16GB eMMC 5.0 flash and micro SD slot up to 256 GB Display – 11.6″ or 14″ IPS LCD display with 1280 x 720 resolution (no touchscreen) Video Output – mini HDMI port for external display Audio – HDMI, 3.5 mm headphone jack, built-in microphone and stereo speakers Connectivity – WiFi 802.11 b/g/n + Bluetooth 4.0 USB – 2x USB 2.0 host ports Camera – 1.2 MP camera User Input Devices – Full size […]

October 25, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Theobroma Systems Introduces Micro Qseven Allwinner A64 System-on-Module

Theobroma Systems, an Austrian based engineering services and embedded systems solutions company, has been designing Allwinner based systems-on-module compliant with Micro Qseven standard for a while, starting with Allwinner A31 A31-μQ7 module in 2015. The company has now launched A64-μQ7 system-on-module powered by Allwinner A64 quad core Cortex A53 processor. A64-μQ7 module specifications: SoC – Allwinner A64 quad core ARM Cortex A53 processor with Mali-400MP2 GPU System Memory – Up to 2GB DDR3 on module Storage – Up to 64GB eMMC flash, Up to 16MB SPI NOR flash Display I/F (via edge connector) – HDMI 1.4 up to 4K @ 30 Hz, MIPI DSI up to 1920×1200 @ 60 Hz Connectivity – 10/100/1000 Mbps PHY USB – 7x USB 2.0 ports including one dual-role port Other I/Os – On-module communication offload controller for CAN, UART, 8x GPIO, I2S, I2C, SMBus, SPI, FAN Security – Optional Global Platform 2.2.1 compliant JavaCard […]

October 4, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Linux 4.8 Release – Main Changes, ARM & MIPS Architectures

Linus Torvalds has officially released Linux 4.8 last Sunday: So the last week was really quiet, which maybe means that I could probably just have skipped rc8 after all. Oh well, no real harm done. This obviously means that the merge window for 4.9 is open, and I appreciate the people who already sent in some pull requests early due to upcoming travel or other reasons. I’ll start pulling things tomorrow, and have even the most eager developers and testers hopefully test the final 4.8 release before the next development kernels start coming 😉 Anyway, there’s a few stragging fixes since rc8 listed below: it’s a mixture of arch fixes (arm, mips, sparc, x86), drivers (networking, nvdimm, gpu) and generic code (some core networking, with a few filesystem, cgroup and and vm things). All of it pretty small, and there really aren’t that many of them. Go forth and test, […]

September 19, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Android 7.0, Android TV 7.0, and Yocto Project Ported to Pine A64 Boards

A few weeks ago, Raspberry Pi 3 got an Android 7.0 Nougat port, and it’s usable for some app even simple games like Angry Bird, but there are still problems with 3D graphics, and hardware video decoding. But thanks to Pine64 forum’s member Ayufan, we now have Android 7.0 and Android TV 7.0 for Pine A64 boards with 1GB or more memory with 3D graphics, and hardware video acceleration for most apps. Everything is said to pretty much work, but there are some known issues, such as camera support (being worked on now), touchscreen support (not tested), YouTube is limited to 360p/480p as it does not support hardware video decoding, and Widevine DRM is not supported. Android 7.0 has also been shown to be about 10 to 15% faster than Android 5.1.1 in GeekBench. Ronnie Bailey has shot a video showing Pine A64 running Android TV 7.0 Nougat. If you […]

August 30, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

C.H.I.P Board and Allwinner A13/R8 SoCs To Get VPU Support in Linux Mainline

Allwinner has mixed relationships with open source communities such as Kodi, especially due to issues with its closed-source CedarX VPU drivers, and some GPL violations. However to address the former, linux-sunxi community has been working on open source Cedrus library for the video processor unit on Allwinner processors, that’s been successfully tested on boards such as Orange Pi One. Free Electrons has gone further, as they’ve made sure Cedrus now works with Linux mainline kernel, currently Linux 4.8, and tested it on Allwinner R8 based Pocket CHIP. The work has been done by Florent Revest, a 19 years old intern at the company, who delivered a new sunxi-cedrus driver, a Video4Linux (V4L2) memory-to-memory decoder kernel driver, and corresponding VA-API backend, with the implementations currently available on Github here and there respectively. Currently only MPEG2 and MPEG4 are working, but adding other codecs such as H.264, and video encoding is possible […]