Windows 11 Category - Page 31 of 45 - CNX Software

March 11, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

V600 Alder Lake Mini PC features Thunderbolt 4 port, dual 2.5GbE, up to Core i9-12900H CPU

V600 mini PC is equipped with an Alder Lake processor from Core i5-1240P up to a Core i9-12900H, up to 64GB RAM, and high-speed interfaces such as Thunderbolt 4 and dual 2.5GbE networking. The mini PC also comes with two M.2 NVMe sockets, one PCIe Gen 4, one Gen 3, and support for SATA drives up to 7mm thick, offers three 4K-capable video outputs with HDMI and DisplayPort video interfaces, and several other USB 3.2/2.0 ports. V600 specifications: Alder Lake-P/H SoC (one or the other) Intel Core i7-1260P 4P+8E (16 threads) processor @ 3.40/4.70GHz with Intel Xe graphics; 28W PBP Intel Core i5-1240P 4P+8E (16 threads) processor @ 3.30/4.40GHz with Intel Xe graphics; 28W PBP Intel Core i7-12700H 6P+8E (20 threads) processor @ 3.5 /4.7 GHz with 96EU Intel Xe graphics; 45W PBP Intel Core i9-12900H 6P+8E (20 threads) processor @ 3.8/5.0 GHz with 96EU Intel Xe graphics; 45W PBP […]

March 9, 2023March 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Windows 11 shown to run on Rock 5B Arm SBC (Rockchip RK3588)

Most people will probably want to run Linux on their Arm SBC, but Windows 11 could also be an option with the Rock 5B and other single board computers based on Rockchip RK3588 and other powerful Arm SoCs thanks to the Windows on Raspberry project. The project, also known as “Windows on R” is maintained by Mario Bălănică who recently tweeted a screenshot showing Windows 11 running on the Radxa ROCK 5B SBC powered by a Rockchip RK3588 Arm Cortex-A76A/A55 clocked at 1.2 GHz (instead of the usual 2.2/2.4 GHz), but with USB 2.0/3.0 and display interface apparently working just fine. PCIe appears to be detected, but not working. He also noted that virtualization worked out of the box unlike with Raspberry Pi 4 SBC showing Windows Subsystem for Linux (WSL 2) and PowerShell in the screenshot below. Virtualization also enabled running Android apps in Windows 11 Arm as shown […]

March 5, 2023May 8, 2023 by Ian W MORRISON (Linuxium) - 13 Comments

Beelink SER6 Pro mini PC review – Windows 11, Ubuntu 22.04, and USB4

Beelink upgraded their earlier SER6, which used an AMD Ryzen 5 6600H processor with integrated AMD Radeon 660M graphics, and released the SER6 Pro which has a faster AMD Ryzen 7 6800H processor with much more powerful integrated AMD Radeon 680M graphics. Beelink kindly sent a SER6 Pro unit for review however since receiving the mini PC, Beelink have ‘refreshed’ the processor to use an AMD Ryzen 7 7735H also with AMD Radeon 680M graphics, and called it the SER6 Pro Refresh. As a result, this review looks at Windows performance which should be indicative for both versions, together with a quick look at running Ubuntu and also a more detailed look at the USB4 port which is a new inclusion to Beelink’s mini PCs. Update: you may be interested in the review of the Beelink SER6 Pro 7735HS – in Windows 11 only – as we’ve also received it […]

March 1, 2023 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Intel Processor N100 mini PC with 8GB LPDDR5 memory sells for $156 and up

Topton is selling a mini PC based on the Intel Processor N100 Alder Lake-N quad-core processor with 8GB LPDDR5 RAM for $156.44 and up depending on the selected SSD capacity. But despite its low price, the specifications are not too bad with dual 4K video output thanks to HDMI 2.0 and DisplayPort interfaces, two Gigabit Ethernet ports, WiFi 5 and Bluetooth 4.2 connectivity, four USB ports including one USB 3.0 port, and an audio jack. Specifications: SoC – Intel Processor N100 Alder Lake-N quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 8GB LPDDR5 4800MHz RAM Storage M.2 socket for M.2 2280 SATA SSD Support for 2.5-inch SATA SSD / HDD up to 7mm thick MicroSD card slot Video Output 1x HDMI 2.0 up to 4Kp60 1x DisplayPort up to 4Kp60 Audio – 3.5mm […]

February 24, 2023February 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

KC12 Alder Lake-P mini PC supports up to 64GB RAM, four displays, and dual 2.5GbE

Alder Lake-P Mini PC quad display dual 2.5GbE

KC12 is a mini PC powered by either an Intel Core i5-1240P or Core i7-1260P Alder Lake-P hybrid processor with up to 64GB DDR4, SATA and NVMe storage options, HDMI and DisplayPort for up to four 4K displays, as well as two 2.5GbE networking interfaces. The actively-cooled computer also comes with six USB ports, four of which are USB 3.x, audio jacks for a headphone and a microphone, an optional WiFi 6 and Bluetooth 5.0 module, an RS232 COM port, and a Kensington lock slot. KC12 mini PC specifications: Alder Lake-P SoC (one or the other) Intel Core i7-1260P 4P+8E (16 threads) processor @ 3.40/4.70GHz with Intel Xe graphics; 28W TDP Intel Core i5-1240P 4P+8E (16 threads) processor @ 3.30/4.40GHz with Intel Xe graphics; 28W TDP System Memory – Up to 64GB RAM via 2x SO-DIMM DDR4-2666/3200 sockets Storage M.2 2280 SSD slot for SATA or NVMe PCIe Gen4 SSD […]

February 20, 2023February 21, 2023 by Ian W MORRISON (Linuxium) - 16 Comments

ODROID-H3+ SBC review with “Unlimited Performance” mode and 2.5GbE Net Card

ODROID-H3+ Review with Net Card and Case Type 7

Hardkernel have added Intel Jasper Lake mini PCs to their ODROID-H series and they are known as the ODROID-H3 and ODROID-H3+. Like the discontinued ODROID-H2/H2+, this new series also supports the Net Card which will add four extra 2.5 gigabit Ethernet ports. Hardkernel kindly sent an ODROID-H3+ together with a selection of accessories for review and I’m going to look at the effect on performance when changing the Power Limit values in the UEFI (BIOS) together with the network performance of the Net Card. ODROID-H3+ hardware overview The ODROID-H3+ physically consists of a 110 x 110 mm (4.33 x 4.33-inch) motherboard complete with an Intel Pentium Silver Jasper Lake mobile N6005 processor which has 4 cores and 4 threads and can boost to 3.3 GHz and also includes Intel UHD Graphics. The processor, and nearly the entire motherboard, is covered by a large metal heat sink: The front of the […]

February 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

KiCad 7.0.0 release – Custom fonts, text boxes, SpaceMouse, crash reporting, and much more

KiCad 7.0.0 open-source EDA software has just been released with a range of new features from custom fonts to 3Dconnexion SpaceMouse integration to opt-in Sentry crash reporting, and many more. It took over three years between KiCad 5.0.0 and KiCad 6.0.0 announcements, but only a little over a year for the release of KiCad 7.0.0. Did KiCad developers acquire superhuman abilities or did AI get involved in the development somehow? Most probably not, and instead they change the release schedule to a yearly one, so we should get annual releases of the open-source EDA suite going forward, with KiCad 8.0.0 to be released in Q1 2024. Some notable changes to KiCad 7.0 include: Custom Fonts support is now available in the schematic, PCB, and worksheet editors to allow the use of any system font. Text box support was added in both the schematic and PCB editors. 3Dconnexion SpaceMouse support in […]

February 13, 2023February 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

VVenC & VVdeC H.266 open source video encoder and decoder work on x86 and Arm

H.266 video decoder windowslinux macOS android

VVenC and VVdeC are open-source software H.266/VCC video encoder and decoder respectively that are optimized to use SIMD instructions on x86 (SSE42/SIMDe and AVX2) and Arm, and the decoder runs on Windows, Linux, macOS, and Android. H.266, aka VCC (Versatile Video Coding) video compression standard was adopted in 2020 promising to reduce data requirements by around 50% compared to the previous H.265/HEVC standard at the same visual quality. H.266 should also outperform the royalty-free AV1 video codec. We hadn’t seen news since the announcement, but this may be changing with the Realtek RTD1319D processor unveiled with support for both 4K H.266 and AV1 video decoding last September, and progress made on the VVenC & VVdeC H.266 open-source software encoder/decoder as been discussed during FOSDEM 2023. The Fraunhofer HHI group has been working on VVdeC and VVenC since the specifications were finalized in 2022. Both are based on VTM reference software […]