Windows 10 Category - Page 61 of 107 - CNX Software

March 22, 2019March 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ZED Depth and Motion Tracking Camera Supports NVIDIA Jetson Nano Board

When NVIDIA launched their low cost Jetson Nano development board earlier this week, one reader asked whether it would support binocular depth mapping. It turns out Stereo Labs has updated the SDK (Software Development Kit) for the ZED depth and motion tracking camera in order to support the latest NVIDIA developer kit. Jetson Nano can manage depth and positional tracking at 30 fps in PERFORMANCE mode with 720p resolution, and while the more powerful and expensive Jetson TX2 achieves doubles the performance at 60 fps, it does so at a much higher cost. ZED depth and motion tracking camera specifications: Video 2.2K @ 15 fps (4416×1242 resolution) 1080p @ 30 fps (3840×1080 resolution) 720p @ 60 fps (2560×720 resolution) WVGA @ 100 fps (1344×376 resolution) Depth Resolution – Same as selected video resolution Range – 0.5 to 20 m Format – 32-bits Stereo Baseline – 120 mm Motion 6-axis Pose […]

March 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

UP Xtreme Board to Feature Intel Whiskey Lake Processor

AAEON launched their UP board family back in 2015 with the original board featuring an Atom X5 Cherry Trail processor. Since then they’ve launched other models all based on processors with 10W or lower TDP (Thermal Design Power) such as UP Squared Apollo Lake development board. But the company has now upped the ante by going with Intel Core-U series Whiskey Lake processors (15W TDP) in their upcoming UP Xtreme single board computer (SBC) that will feature some of those Core i3/i5/i7 processors. UP Xtreme specifications: SoC- Intel Dual/Quad Core “Whiskey Lake” Core i3/i5/i7 processor @ 1.8 GHz (Boost frequnecy up to 3.9GHz for i3/i5, up to 4.6 GHz for i7) with Intel UHD graphics 620; 15W TDP System Memory – Up to 16GB dual-channel DDR4 memory (soldered on-board) Storage – 16GB to 128GB eMMC 5.1 flash, 1x SATA connector with power connector Video Output 1x eDP with backlight control […]

March 6, 2019May 4, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON RTC-1010M Semi Rugged Tablet Runs Windows 10 IoT or Android 9

AAEON has introduced a new semi-rugged Intel Apollo Lake tablet with a 10.1” sunlight readable screen, IP54 certification, and optional modules such as a smart card reader, magnetic stripe reader (MSR) and 2D barcode scanner, as well as various mounting options from docking mounts to shoulder belts. The choice of operating system is also interesting for AAEON RTC-1010M tablet as it will come with Windows 10 IoT by default, and support for Android 9 is planned for Q2 2019. AAEON RTC-1010M tablet specifications: SoC (One or the other) Intel Celeron N3350 dual core processor @ 1.1 GHz / 2.4GHz (Turbo) with Intel HD graphics; 6W TDP Intel Pentium N4200 quad core processor @ 1.1GHz / 2.5GHz (Turbo) with Intel HD graphics; 6W TDP System Memory – 4 GB DDR3L (Default), up to 8GB Storage – 64GB eMMC flash, microSD card slot, optional mSATA III drive up to 512GB Display – […]

March 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Acute Angle AA is a Triangle Shaped Mini PC with a Wooden Finish

Most mini PCs are boring black boxes, and maybe that’s the way it should be, but if you are looking for something a bit fancier Acute Angle AA is an Apollo Lake mini PC with a triangular shaped enclosure made of aluminum and something that looks like wood… The mini PC is equipped with an Intel Celeron N3450 quad core processor, 8GB RAM, 64GB eMMC flash, 128GB SSD, and is currently sold for $199.99 shipped on GearBest. Acute Angle AA was apparently launched at CES 2018 riding the cryptocurrency wave, and selling for $600 as a dual use machine: a standard mini PC and an Ethereum mining machine during idle time working together with other Acute Angle AA mini PCs as part of the Acute Angle Cloud. None of the Ethereum / cryptocurrency mining / cloud options are mentioned in the specifications, but you still get a uniquely designed machine […]

February 15, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

GPD MicroPC is a Windows 10 / Ubuntu MATE Portable Mini PC for Sysadmins (Crowdfunding)

I shortly discussed GPD MicroPC, a portable computer specifically designed for for network engineers and sysadmins in a post about the company’s Pocket 2 Amber Black mini laptop, but I did not go into details at the time since it was not available. GPD has now launched a crowdfunding campaign on Indiegogo for the portable Gemini Lake mini PC, where you can pick one of the 2,000 units that are available for $299 including worldwide shipping. GPD MicroPC specifications: SoC – Intel Celeron N4100 quad core Gemini Lake processor with Intel UHD Graphics 600 System Memory – 4GB LPDDR4 Storage – Replaceable 128GB M.2 2242 SATA SSD, micro SDXC card slot Display – 6″ display with 1280×720, Gorilla Glass 4, 178° viewing angle Video Output – HDMI 2.0 up to 4K @ 30 Hz Audio – Built-in microphone, headphone jack, digital audio via HDMI Networking Gigabit Ethernet 802.11 a/b/g/n/ac WiFi […]

February 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

You Can Now Run Windows 10 Home/Pro on Raspberry Pi 3

The Raspberry Pi 3 Model B/B+ SBC officially supports Windows 10 IoT, but if you ever wanted to run the full Windows 10, you’d be out of luck since Microsoft does not provide this option. However, there’s now an unofficial app called WoA Installer for Raspberry Pi 3 that can install Windows 10 Home / Professional Arm64 on your Raspberry Pi 3 B/B+ board. WoA stands for Windows on Arm, and the project is hosted on Github. All you need is a Windows 10 computer with .NET Framework 4.6.1, a class A1/A2 micro SD card, your RPi 3 board, and a Windows 10 ARM64 Image. The interesting part is that you apparently have to generate the .wim image through your web browser by going to https://uup.rg-adguard.net/ where you’ll be to select: Type – Windows (Final version), Windows (Insider version), Cumulative update for Windows 10 Version – Choice of x86 or […]

February 11, 2019February 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

F&S Elektronik PicoCore MX8MM System-on-Module Features NXP i.MX 8M Mini Processor

Embedded World 2019 will take place at the end of this month on February 26-28 in Nuremberg, Germany, and we can expect plenty of news related to embedded systems. It’s very likely NXP i.MX 8M Mini processor will officially be launched, and we’ll see several modules and boards announced with the lower cost 14-nm processor. F&S Elektronik Systeme has already been promoting their upcoming PicoCore MX8MM system-on-module based on NXP i.MX 8M in their newsletter ahead of Embedded World, where they’ll showcase their solutions at booth 621 in hall 2. PicoCore MX8MM specifications: SoC – NXP i.MX 8M Mini single, dual, quad core Arm Cortex-A53 @ 1.8 GHz processor, Cortex-M4 real-time core @ 400 MHz, 512KB L2-Cache, 2D/3D GPU System Memory – Up to 8GB LPDDR4 Storage – Up to 512MB SLC NAND flash or up to 32GB eMMC flash Video Decode – 1080p60 HEVC H.265, VP9, H.264, VP8 Connectivity 802.11ac […]

February 6, 2019February 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ZOTAC Unveils ZBOX PRO Embedded Mini PC Line-up

ZOTAC is known for their ZBOX consumer and business mini PCs, but they are now entering the embedded computing market with the launch of ZBOX PRO line-up based on their commercial offering but with more robust designs for medical equipment, industrial robots, casino game systems, IoT gateways, ATMs, and more. The company launched 5 models features various Intel processors from Celeron to Core-i7, but I’ll focus on the three passively cooled low power models in this post. ZBOX Pro CI329 nano Specifications mostly follow the ones of ZBOX CI329 Nano model with differences highlighted in bold or stricken-through: SoC – Intel Celeron N4100 quad-core processor (1.1GHz up to 2.4GHz, 4MB cache) with Intel UHD Graphics 600 System Memory – 2x DDR4-2400MHz dual-channel SO-DIMM slots, up to 8GB Storage 1x 2.5″ SATA 6.0 Gb/s HDD/SSD bay 1x M.2 2242/2260 key-M socket for SSD SD/SDHC/SDXC card reader Video Output 1x HDMI 2.0, […]