Ubuntu Category - Page 179 of 186 - CNX Software

August 1, 2013August 3, 2013 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$149 Hardkernel ODROID-XU Octa Core big LITTLE Development Board

Just a few days after noticing code for ODROID-XU in hardkernel repository, the company has now launched ODROID-XU development board powered by Exynos 5410 octa core processor with 2GB RAM, USB 3.0, and more for just $149 (as long as you order in August, $169 after that). Here are ODROID-XU hardware specifications: SoC – Samsung Exynos5 Octa Cortex-A15 and Cortex-A7 big.LITTLE processor with PowerVR SGX544MP3 GPU System Memory – 2GB LPDDR3 RAM Storage – micro SD slot, eMMC 4.5 connector Video Output – micro HDMI + MPI LCD interface and Touch screen I2C ports (IPEX-40PIN) Audio – micro HDMI, headphone jack, MAX98090 Audio Codec Connectivity – 10/100M Ethernet via USB 2.0 (LAN9730) USB – 1x USB 3.0 Host, 1x USB 3.0 OTG, and 4x USB 2.0 Host Expansion Header – 30 pins (GPIO/IRQ/SPI/ADC) Misc – PWM connector for Cooler, Power Supply – 5V/4A (Plug specification is inner diameter 2.1mm and […]

July 31, 2013September 28, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Freescale i.MX6 Based Server Systems – Cornfed CONSERVER and Ventana Network Processing Boards

I usually spend most of my time writing about low cost hardware in this blog, but in this post, I’ll deal with higher-end and more expensive devices based on Freescale i.MX6 with Cornfed CONSERVER Server System and corresponding CONSERVER motherboard, as well as Ventana Network Processing Boards. Cornfed CONSERVER Conserver is a low power high-performance ARM processor server system based on Freescale i.MX6 with 4GB RAM, Gigabit Ethernet, and SATA. The hardware specifications are as follows: SoC – Freescale i.MX6Q Quad Core ARM Cortex A9 processor @ 1.2 GHz System Memory – 4 GB DDR3 RAM Storage – ?? GB NAND Flash + 1x SATA2 connector for HDD/SSD Connectivity – 1x Gb Ethernet port USB – 4x USB Host ports Video Output – 1x HDMI port Misc – RS-232 Serial port Power Supply – 35W Internal AC Power Supply Dimensions – Mini-ITX form factor The system is preloaded with Ubuntu, and […]

July 31, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linaro 13.07 Release With Linux Kernel 3.10.1 and Android 4.2.2

Linaro 13.07 has been released with Linux Kernel 3.10.1 (both baseline and stable versions), and Android 4.2.2. It’s summer time, so activity seems to have slowdown a bit, yet improvements have done to LAVA with the first LAVA Multi-purpose Prove (LMP) setup, and Linaro has released build with Linux 3.10.1, Ubuntu Raring, OpenEmbedded (ARMv8), and Android. For the very first time, there’s even an Android 4.2.2 community build for HiSilicon K3V2 hardware (HiSilicon Hi4511 development platform). Here are the highlights of this release: LAVA LAVA Core VExpress A9 test images no longer use the master image’s boot loader Support added for interactive bootloader commands. Support for OpenID / Crowd added for LAVA. LAVA Master images updated on images.validation.linaro.org LAVA Multi-node – Multi-Node support has an initial implementation which can support communication between nodes under test via the use of a GroupDispatcher. LAVA Lab Capabilities – LMP (LAVA Multi-purpose Probe) prototypes […]

July 26, 2013July 26, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Rikomagic Announces MK802III LE and MK802IV LE mini PCs Preloaded with Linux (Picuntu)

If you’ve been following the ARM based mini PC space, you may already know about Rikomagic MK802 III and MK802 IV HDMI TV Sticks, respectively based on Rockchip RK3066 and RK3188, running Android Jelly Bean. Rikomagic and Cloudsto Electronics have just announced they will launch a “Linux Edition” (LE) for those two devices called MK802III LE and MK802IV LE Quad Core, running Picuntu (Ubuntu) Linux. Since Linux on RK3188 is still work on progress, Cloudsto MK802III LE will be available first, with the following specs: SoC – Rockchip RK3066 dual core Cortex A9 @ 1.6Ghz + Mali-400 MP4 GPU System Memory – 1GB RAM Storage – 16GB Micro SD card preloaded with PicUntu, but no word about NAND flash Video Output – HDMI (1080p) Connectivity – Wifi 802.11 b/g/n USB – 2 x USB ports It’s not very clear if the hardware will be slightly tweaked (e.g. smaller NAND flash, […]

July 25, 2013 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Wandboard Quad Unboxing, Getting Started with Android and Linux (via The Yocto Project)

After my review of the Wandboard Dual in February, I’ve now received Wanboard Quad development board powered by Freescale i.MX6 Quad Cortex A9 processor, with 2 GB RAM, HDMI output, Gigabit Ethernet, and SATA. The board is available from several distributors including Mouser ($139), DigiKey ($144.38) and FutureElectronics ($125). I’ll start by showing some unboxing pictures of the board, as well as pictures of Wandboard Dual and Quad side-by-side. Then I’ll explain how to install Android and Linux on the board, build the images from source, run some benchmarks, and test different features. Wandboard Quad Unboxing Ive received the board via UPS in a large box that contained the package below. This is exactly the same as Wandboard Dual, except for the sticker. There’s just the board inside the package, and it would just look like Wandboard Dual with all connectors on the top, and the EDM module at the back, […]

July 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Ubuntu Edge Smartphone PC Hits Indiegogo

Canonical has announced Ubuntu for Phones and Ubuntu for Tablets at the beginning of the year, with the goal of bringing Ubuntu operating system to mobile devices, and transform high-end devices into the new PC when they are connected to an HDMI display. It turns out mobile phone manufacturers may not be ready to take the risk launching a completely new high-end platform to the market, so Canonical decided to leverage the power of crowdfunding but launching an Indiegogo campaign for Ubuntu Edge, a smartphone with hardware specs like no others, capable of running both Android and Ubuntu, and fully replacing your PC when docked. Ubuntu Edge Preliminary/Targeted Specifications: SoC – “Fastest Multicore Processor Available” System Memory – At least 4 GB RAM Storage – 128 GB flash Display – 4.5″ display with the best balance of resolution (720p), dynamic range and color accuracy, covered with sapphire crystal glass (Unscratchable, […]

July 17, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Waxberry Pi2 Development Board Based on Rockchip RK3066

The other days I announced CubieTech and Olimex were working on low cost Rockchip development boards, but it turns out there’s already one on the market called Waxberrry Pi2, or WB-RK3066, made by Waxberry, a Chinese company. Here are the specifications of this development board: SoC – Rockchip RK3066 dual core Cortex-A9 processor @ 1.6GHz with Mali-400 MP4 GPU System Memory – 1GB DDR3 RAM Storage – 8GB NAND Flash + micro SD card slot USB – Standard USB OTG + Micro USB OTG; Connectivity: 10/100M Ethernet; WIFI 802.11b/g/n (MediaTek MT5931) Bluetoothv2.1+EDR (MediaTek MT6622) Video Output – HDMI + AV Debugging – Serial port Misc – IR Sensor Dimensions – 72mm x72mm The board comes with a Mini HDMI cable, a 5V/2A power supply, a USB Data cable, and a USB-serial board for debug. There’s also a CD with the board schematics, Android 4.1.1 SDK and Linux Kernel 3.x source […]

July 15, 2013July 16, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Freescale SABRE Lite i.MX6 Development Board Unboxing, Wandboard Quad Comparison, and Quick Start Guide

Freescale SABRE Lite is a development board powered by i.MX6 Quad processor with 1GB RAM, SATA, GbE Ethernet, and more. You can get SABRE Lite specifications in my first post about the board. I recently participated in Element14’s “brainteaser” competition for the 4th birthday of their community, where the company offered 9 SABRE Lite development kit to randomly selected participants, and I got lucky. The board can be purchased for $179 from Element14 (MCIMX6Q-SL). I’ll start by showing what in the package, followed by a side-by-side comparison with Wandboard Quad, and show how to getting started by following the Quick Start Guide provided with the board. SABRE Lite i.MX6 Development Kit Unboxing I received the board about 5 days after I provided my address in a large staple carton box with a few goodies. Beside SABRE Lite devkit, the package comes with Element14’s T-Shirt (not my size), double walled tumbler, […]