Ubuntu Category - Page 151 of 191 - CNX Software

November 10, 2015January 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Intel Quark D1000 Customer Reference Board and Intel System Studio for Microcontrollers

Intel unveiled Intel Quark D1000, D2000 and SE micro-controllers last week, with Intel Quark D1000 available now for $2.5 to $4 depending in quantities, and to my knowledge the first Intel MCU that can be considered ultra low power. I could not see a development board at the time, but Intel does have an Intel Quark D1000 Customer Reference Board with a familiar Arduino form factor. Intel Quark D1000 board specifications: MCU – Intel Quark D1000 32-bit CISC micro-controller @ 32 MHz Storage – 4MB SPI flash (Microchip ) Connectivity – Bluetooth LE radio, Wi-Fi (Inventek Systems Serial to Wifi module) Sensor – 3-axis accelerometer Expansion – Arduino compatible headers with GPIOs, I2C, SPI, UART, analog inputs, and 5V, 3.3V and GND. Debugging – mini USB port for programming and debugging; JTAG pins Power – 5V via mini USB port, or LiPo / Li-ion battery Dimensions – N/A Information about […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Orange Pi Plus 2 Allwinner H3 Board Includes 2GB Memory

Shenzhen Xunlong has made yet another Allwinner H3 board. It’s called Orange Pi Plus 2 with basically the same specifications as Orange Pi Plus, but the layout has been modified with a slightly wider board, and the RAM upgraded from 1GB to 2GB. Orange Pi Plus 2 specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC, micro SD card slot, SATA interface (via a USB to SATA chip), Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100/1000M Ethernet, 802.11 b/g/n Wi-Fi (Realtek RTL8189ETV) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin Raspberry Pi Model A+/B+ (mostly) compatible header Debugging – 3-pin UART header for serial console Misc – IR receiver; Power, […]

November 7, 2015November 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Nvidia Jetson TK1 Development Board is Now Selling for $99 (Promo)

Sorry that I don’t have an Nvidia Jetson TK1 board to give away…, but if you were interesting in getting one the best ARM Linux boards available today, and found the $192 price tag a little too high, Make announced a ~50% discount offer to get the board for $99 on Nvidia store using MAKEJTK1 coupon. Here’s a reminder of the board’s specifications: SoC – Nvidia Tegra K1 SoC with 4-Plus-1 quad-core ARM Cortex A15 CPU, and Kepler GPU with 192 CUDA cores (Model T124) System Memory – 2 GB x16 memory with 64 bit width Storage – 16 GB 4.51 eMMC memory, SATA data + power ports, full size SD/MMC slot, and 4MB SPI boot flash. Video Output – HDMI port Audio – ALC5639 Realtek Audio codec with Mic in and Line out Connectivity – RTL8111GS Realtek GigE LAN USB – 1x USB 2.0 OTG port, micro AB, 1x […]

November 5, 2015July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower is a Taiwanese company that first focused on graphic cards, but has since then also developed other solutions requiring high GPU performance for military & aerospace applications as well as medical equipment. One of these products is TK1 Carrier Board with TK1 SoM powered by Nvidia Tegra K1 quad core processor, that can be encapsulated into TK1 PowerUnit industrial computer. There are actually two TK1 carrier boards: the larger V1.2 with more ports and features, and the smaller V2.0 that is used in TK1 PowerUnit Box, but they share most of the same (preliminary) specifications: SoC – Nvidia Tegra K1 quad core ARM Cotax-A15 processor with Nvidia Kepler 192-core GPU System Memory – 2GB DDR3 @ 933 MHz Storage – 16GB eMMC flash and SPI serial flash. V2.0 only: Adds micro SD slot; V1.2 only: Adds SD slot and SATA Connectivity – Gigabit Ethernet; optional 802.11ac and Bluetooth 4.0 […]

November 5, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 243 Comments

Giveaway Week – A80 Optimusboard Development Board

Together with Rockchip RK3288, Allwinner A80 is one of the most powerful Chinese ARM processors for mini PCs or development board, and today I’m starting a giveaway for A80 OptimusBoard development board based on Allwinner octa core big.LITTLE processor. When I got the board last year, it was indeed powerful as shown in benchmarks. But unfortunately after Allwinner provided me with a new firmware supposed to fix some NTFS write performance issues, I quickly discovered it also had some stability issues whose reasons were not clear, and Merrii Technology support is not very good to say the least, at least for hobbyists, and even now there’s no operating system for download on the board page. Luckily PcDuino Arches (previously known as PCDuino8) is basically the same, and you can download some Lubuntu & Android images on Linksprite website instead. The firmware has not been updated since 2014 however. To enter […]

October 29, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Getting Started with NodeMCU Board Powered by ESP8266 WiSoC

Since ESP8266 is now so popular, I’ve recently bought a NodeMCU board to try it. I selected this board because the latest version of the board is breadboard-friendly, integrates a USB to serial chip, and it can be powered by a simple USB to micro USB cable. I also noticed a ESP8266 tutorial with NodeMCU firmware by SwitchDoc Labs the other day (using ESP-12 and Adafruit Huzzah), which I applied to my NodeMCU board, but since I encountered a few issues, I decided to report my findings, and write my own little getting started guide to switch on/off LED and GPIOs using a web interface. NodeMCU v0.9 and NodeMCU v1.0 If you are going to purchase a NodeMCU board it’s important to know there are two official versions: NodeMCU v0.9 with ESP-12 module NodeMCU v1.0 with ESP-12E module The main complain about NodeMCU v0.9 is that while it fits on […]

October 24, 2015October 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

giggleBits Hackable ARM & FPGA Router Comes with an SFP Cage and 5 Gigabit Ethernet Ports (Crowdfunding)

Remember Snickerdoodle board? If you don’t, the board is one of the cheapest Xilinx Zynq available on the market, and the project is currently on CrowdSupply, and 75% funded with 28 days left. They’ve just posted an update about a new daughterboard that I found interesting: giggleBits which provides 5 Gigabit Ethernet and an SFP cage on top of WiFi 802.11 b/g/n and Bluetooth connectivity already found on Snickerdoodle board. giggleBits + snickerdoodle specifications: SoC/Memory/Storage/WiFi via Snickerdoodle board: SoC Xilinx Zynq-7010 dual core Cortex A9 processor @ 667 MHz + FPGA with 430K gates or Xilinx Zynq-7020 dual core Cortex A9 processor @ 866 MHz + FPGA with 1.3million gates (~430K ASIC gates) System Memory – 512MB or 1GB LPDDR2-800 Storage – micro SD card slot, 16MB boot flash Ti Wilink 8 – single or dual band 802.11 b/g/n WiFi + Bluetooth 4.0 Expansion – 4x 40-pin TFM headers for access […]

October 23, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Inforce Computing 6401 Micro SOM is a Qualcomm Snapdragon 600 System-on-Module

Inforce Computing announced their 6501 Micro SOM system-on-module based on Qualcomm Snapdragon 805 processor in Q2 2015, and the company informed me that they had just unveiled a lower power version based on Snapdragon 600 processor called 6401 Micro SOM, and still featuring WiFi, Bluetooth 4.0, and GPS connectivity on module. Inforce 6401 Micro SOM: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait processor up to 1.7 GHz with Adreno 320 GPU, and Hexagon DSP v4 up to 500MHz System Memory – 2GB PoP LPDDR2 @533Mhz (Optional 3GB) Storage – 4GB eMMC v4.4.1/v4.5, with options up to 64GB Connectivity – BT 4.0 , dual band 802.11n/ac Wi-Fi (QCA6234), and GPS (WGR7640) with WiFi and GPS antennas on carrier board Peripherals and I/O via two 100-pin SoM connectors: Video / Display – 1x HDMI, 2x MIPI-DSI (4-lane) & touch screen Audio 4x Line out, 3x Mic-in, 1x headphone out 8-channel […]