Ubuntu Category - Page 128 of 187 - CNX Software

March 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

System76 Starling Pro ARM Server Powered by 2 Cavium ThunderX 64-bit Processors Sells for $6400 and Up

64-bit ARM servers are starting to show up more and more for sale, and after servers such as Softiron Overdrive 1000, Avantek H270-T70, and Gigabyte MP30-AR0, System76, a company selling only Ubuntu powered computers and servers, has launched Startling Pro ARM server equipped with two Cavium ThunderX_CP 48-core processors, and a choice of two operating systems: Ubuntu 16.04.2 LTS 64-bit or Ubuntu 16.10 64-bit. System76 Starling Pro ARM “stap1” server specifications: Processor – 2× Cavium ThunderX_CP 48 core 64-bit ARMv8 processor @ up to 2.5 GHz (96 cores in total) System Memory – Up to 1024 GB quad-channel registered ECC DDR4 @ 2400MHz Storage – Up to 4x 3.5″ drives, 32 TB in total Video Output – VGA port Virtualization – ARM Virtualization Host Extensions Networking – 3x 40-Gigabit QSFP+ (Quad Small Form-factor Pluggable+), 4x 10 Gigabit SFP+, 1x Gigabit Ethernet (RJ45) Expansion – 1x PCI Express x16 (Gen3 x8) […]

March 1, 2017April 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

FriendlyELEC NanoPi M1 Plus Allwinner H3 Board Adds Gigabit Ethernet, WiFi & Bluetooth, and an 8GB eMMC Flash

FriendlyELEC has introduced an update to NanoPi M1 board, aptly named NanoPi M1 Plus with a similar form factor and Allwinner H3 processor, but adding Gigabit Ethernet, 802.11 b/g/n WiFi & Bluetooth, and an 8GB eMMC flash, at the expense of one USB port that had to go to make place for the new features, and it got a little wider too.NanoPi M1 Plus board specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot Video & Audio Output – HDMI and 3.5mm jack for CVBS (composite + stereo audio) Connectivity – Gigabit Ethernet, 802.11 b/g/n WiFi and Bluetooth 4.0 dual mode (classic + low energy) with chip antenna and IPEX/u.FL connector USB – 2x USB 2.0 host ports, 1x 4-pin USB 2.0 […]

February 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 77 Comments

ODROID-XU4 Development Board Price Drops to $59, Now Supports Linux 4.9 LTS

ODROID-XU4 development board powered by Samsung Exynos 5422 octa-core processor launched in summer 2015, but even after two years, it’s one of the fastest, if not the fastest, low cost development board on the market. It is also equipped with Gigabit Ethernet and USB 3.0 ports, but so far at $74, it was quite much expensive than slower peers. Hardkernel has now decided to lower the price to $59 plus shipping, which is really a good deal in terms of price/performance, and you’ll also benefit from close to two years development, as the board now supports Linux 4.9 with updates promised until early 2019. Here’s a reminder of the technical specifications: SoC – Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz + quad core ARM Cortex-A7 @ 1.4GHz with Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB […]

February 15, 2017February 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

GPD Pocket Cherry Trail 7″ Portable Computer Runs Ubuntu 16.04 or Windows 10 (Crowdfunding)

GPD HK launched GPD WIN Windows 10 portable gaming console with a Cherry Trail Atom x7 processor and a 5.5″ display last year on Indiegogo, and while the crowdfunding campaign works very well with over $700,000 raised, the company realized many people just wanted an affordable portable computer, so they removed the joyticks, increased the display size, and upgraded the processor in their GPD Pocket 7″ portable computer powered by an Intel Atom X7-Z8750 SoC and pre-loaded with either Windows 10 Home or Ubuntu 16.04 LTS. GPD Pocket specifications (subject to change): SoC – Intel Atom x7-Z8750 quad core Cherry Trail processor @ 1.6 / 2.56 GHz with a 16EU Intel HD graphics Gen9 System Memory – 8GB LPDDR3-1600 Storage – 128GB eMMC flash Display – 7″ multi-touch display with 1920×1200 resolution, 16:10 aspect ratio; Corning Gorilla Glass 3 Video Output – micro HDMI port for final model (prototype has […]

February 15, 2017February 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

$369 CHUWI Hi13 2-in-1 Windows 10 Tablet is Equipped with a 3000×2000 Display, Supports Ubuntu / Linux

I’ve recently reviewed CHUWI LapBook 14.1 laptop powered by an Intel Apollo Lake Celeron N3450 quad core processor, and found it to be a perfectly usable entry-level laptop with a few caveats like potential issues with USB ports, and the lack of brightness keys. The company is now about to launch with a higher end model, with the same processor, but instead of a 14.1″ Full HD display it will come with a high resolution 3000×2000 touchscreen 13.5″ display. The tablet will sell with Windows 10, but the company also claims support for Ubuntu, and other Linux distributions will likely work too. CHUWI Hi13 specifications: SoC – Intel Celeron N3450 quad core “Apollo Lake” processor @ 1.1 GHz / 2.2 GHz (Burst frequency) and 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz (Burst freq.); 6W TDP System Memory – 4GB DDR3L memory Storage – 64 GB […]

February 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

How to Upgrade to Linux 4.8 in Ubuntu 16.04.2

I had read from several news sources that Ubuntu 16.04.2 would come with Linux 4.8. My system was upgraded from Ubuntu 16.04.1 to Ubuntu 16.04.2 this week-end, but I still had Linux 4.4.

cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.2 LTS"
uname -a
Linux FX8350 4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

cat /etc/lsb-release

DISTRIB_ID=Ubuntu

DISTRIB_RELEASE=16.04

DISTRIB_CODENAME=xenial

DISTRIB_DESCRIPTION="Ubuntu 16.04.2 LTS"

uname -a

Linux FX8350 4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

So I wondered why that was, and eventually found my answer on Reddit thanks to EndofLineLF user: If it isn’t a new 16.04.2 installation then you won’t have newer kernel. If your install started as 16.04 or 16.04.1 then with all updates installed “lsb_release” will display 16.04.2 as version because that’s what you have. The switch to HWE (Hardware Enablement Stack) was never automatic. So if you want newer kernel you have to install it manually. https://wiki.ubuntu.com/Kernel/RollingLTSEnablementStack#Packages-1 sudo apt-get install –install-recommends xserver-xorg-hwe-16.04 This will also install the new HWE kernel because it is recommended for that package. Upgrading to the new kernel is completely optional, and Linux 4.4 will still get security updates, but I did […]

February 11, 2017July 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

Review & Quick Start Guide for Khadas Vim Pro Development Board with Ubuntu 16.04

Khadas Vim is the only Amlogic S905X development board I’m aware of. There are 4 or 5 versions of the board, but currently only two models are sold: Khadas Vim with 8GB flash and single band WiFi + BLE 4.0, and Khadas VIM Pro with 16GB flash, and dual band WiFi + BLE 4.2. SZWesion, the company behind the board, has sent Khadas Vim Pro for evaluation. Today, I’ll take a few pictures of the board and its accessories, and report my experience playing with Ubuntu 16.04.2 on the board. They’ve also released Android, LibreELEC, and dual boot Android/Ubuntu (for Vim Pro only) images, which you can find in the firmware resources page. Khadas Vim Pro Unboxing and Photos My parcel included Khadas package that looks like a book, an HDMI cable, and the same IR remote control sent with GeekBox, the first board made by the company, and powered […]

February 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Fairphone 2 “Ethical” Smartphone Gets a Ubuntu Port

Fairphone aims to “create positive social and environmental impact from the beginning to the end of a phone’s life cycle”by designing easy to repair and long lasting phones that can be recycled and reused, and manufactured in good working conditions using conflicts-free materials. Their latest model is the Fairphone 2 5” Android 5.1 smartphone with a Qualcomm Snapdragon 801 processor, but you can now install Ubuntu on the device as UBports Ubuntu community has released a port for the phone. Let’s go through Fairphone 2 hardware specifications first: SoC- Qualcomm Snapdragon 801 (MSM8974AB) quad core Krait 400 processor @ up to 2.26 GHz with Adreno 330 GPU System Memory – 2 GB LPDDR3 Storage – 32GB eMMC flash + micro SD slot with support for SDHC, SDXC, UHS cards Display – 5″ Full HD (1920 x 1080) LCD TFT IPS touchscreen display with Gorilla Glass 3 Cellular Connectivity 2x micro […]