Operating Systems Category - Page 968 of 1001 - CNX Software

October 10, 2011October 10, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

CyanogenMod 7.1 Android Released

CyanogenMod Team has just released CyanogenMod 7.1 based on Android 2.3.7. The previous version (7.0.3) was released on the 6th of May 2011. CyanogenMod 7.1 Changelog Common: Android 2.3.7 (Google) Common: Bluetooth mouse support – Scott Brady Common: Improve notification swipe-to-clear – Evan Charlton Common: Improve album-artist support in media scanner – Paul Crovella Common: Profile improvements and bugfixes – Martin Long, Danny Baumann, Robert Burns Common: RTL text improvements – Eyad Aboulouz, Eran Mizrahi Common: Wake on volume key option – Sven Dawitz Common: Support for revoking application permissions – Plamen K. Kosseff Common: Latest Superuser app – ChainsDD Common: Control brightness by sliding on statusbar – Danesh M Common: Add “copy all” to context menu – Danesh M Common: Lockscreen haptic and statusbar indicators toggle – Danesh M Common: Nicer timepicker/datepicker – Jiri Tyr Common: Configuration 0/90/180/270 rotation – Jonas Larsson, Scott Brady Common: DSP Manager bugfixes and […]

October 10, 2011January 17, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Web Servers for Embedded Systems

Many network-enabled embedded devices do not have displays and configuration must be done via a webpage. This is the case for modems and routers and possibly for IP cameras, networked printers… With a web server, there is no need to develop specific drivers and/or applications for computers connected to the device. You just need to write HTML/Javascript pages and possibly CGI scripts. I’ve already posted a blog post about mathopd for ARM no-mmu targets as this HTTP server is ideal for uCLinux since it does not fork. Today, I’ll list some other HTTP servers that may also be used with embedded processors. Tiny/Turbo/Throttling HTTP server thttpd is a lightweight HTTP server implementing the HTTP/1.1 (minimum) and simple to configure and run. Its executable size is 88K. The description says it does not fork, but fork is called in the source code, so I do not know what that means… It’s […]

October 10, 2011October 10, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

HTML5 Bleeding Edge – Google Devfest Chiang Mai 2011

GTUG Thailand has uploaded 2 videos that recorded HTML5 Bleeding Edge presentation by Eric Bidelman at Google Devfest 2011 in Chiang Mai, Thailand on September, 24 2011. This presentation focuses on what’s new on HTML5 including WebSockets, messaging, and rich media APIs like the Web Audio API. A summary of this presentation is available here. The presentation slides are available at http://bleedinghtml5.appspot.com and the instructions to retrieve code are given at http://code.google.com/p/bleedinghtml5/ Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

October 8, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Finding a Missing Package in Ubuntu with Aptitude

When you configure a program before building, it will usually check for dependencies and if one is missing it will return an error such as: checking for OPENSSL… configure: error: Package requirements (openssl) were not met: No package ‘openssl’ found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. It could be a PATH issue, but usually that simply means the development version of the library is not installed. Sometimes the name is easy to guess and can be installed with apt-get: sudo apt-get install packagename-devel But sometimes it’s more difficult to guess and Google is not always very helpful. In that case you can use aptitude to search for the package. For example for nss3: sudo aptitude search nss3 i libnss3 – Network Security Service libraries i libnss3-1d – Network Security Service libraries p libnss3-dbg – Development files for the Network Security p libnss3-dev […]

October 7, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Linux Conference Europe 2011

Embedded Linux Conference Europe (ELC-E 2011) will take place on October 26 – 28, 2011 at Clarion Congress Hotel in Prague, Czech Republic. The event will be co-located with LinuxCon Europe 2011 and GStreamer Conference. The day before the official opening of the conference, two tutorials will be offered on Tuesday 25th of October:b Outside the Box: An Introduction to Embedded Linux and Hardware Interfacing Using the Snowball Board – 9:00 – 17:00 – Trainer: Chris Simmonds – Cost: 350 USD. Embedded Android Workshop – 9:00 – 17:00 – Trainer: Karim Yaghmour- Cost: 300 USD. ELCE consists of 3 days of presentations, tutorials and sessions. There will be over 50 sessions during those 3 days. I’ll highlight a few sessions that I find particularly interesting. October 26 10:45 – 11:45 – Linaro’s Android Platform by Zach Pfeffer, Linaro Android Platform team leader. Linaro uses components from the Android Open Source […]

October 6, 2011October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Dropbear: Lightweight SSH Server / Client

You may need to remotely access your embedded device, or your embedded systems is simply headless. You could use telnet, but this is insecure. A secure way to access a device remotly is to use SSH protocol. OpenSSH is one implementation but this is relatively too large and may use uncesary space on a device with limited storage. That’s where Dropbear comes into play. Dropbear is a lightweight implementation of an SSH client and server and is ideal for embedded systems. Dropbear ARM executable is only 200 KB. Here’s how it’s described on its website: Dropbear is a relatively small SSH 2 server and client. It runs on a variety of POSIX-based platforms. Dropbear is open source software, distributed under a MIT-style license. Dropbear is particularly useful for “embedded”-type Linux (or other Unix) systems, such as wireless routers. The main features of dropbear: A small memory footprint suitable for memory-constrained […]

October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cross-comping zlib for ARM target

Zlib is defind as “A Massively Spiffy Yet Delicately Unobtrusive Compression Library” and used in many projects requiring compression. Here are the instructions cross-compile zlib for ARM: Download zlib1.25 wget http://cdnetworks-kr-2.dl.sourceforge.net/project/libpng/zlib/1.2.5/zlib-1.2.5.tar.gz Extract it tar xzvf zlib-1.2.5.tar.gz cd zlib-1.2.5 Configure, build and install zlib. CC=armv5tel-redhat-linux-gnueabi-gcc ./configure –prefix=/home/jaufranc/edev/rootfs make make install This will install libz.a (static library) and libz.so (dynamic library) in /home/jaufranc/edev/rootfs/lib and copy the header files to /home/jaufranc/edev/rootfs/include. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Installing an ARM Toolchain in Fedora

You can easily install an arm cross-compiler on Fedora as follows: cd /etc/yum.repos.d/ sudo wget http://ftp.linux.org.uk/pub/linux/arm/fedora/cross/cross.repo sudo yum install armv5tel-redhat-linux-gnueabi-gcc You can check the installation worked by checking the cross-compiler version [jaufranc@localhost ~]$ armv5tel-redhat-linux-gnueabi-gcc -v Using built-in specs. Target: armv5tel-redhat-linux-gnueabi Configured with: ../configure –prefix=/usr –mandir=/usr/share/man –infodir=/usr/share/info –enable-shared –enable-threads=posix –enable-checking=release –with-system-zlib –enable-__cxa_atexit –disable-libunwind-exceptions –enable-languages=c,c++ –disable-libgcj –with-sysroot=yes –enable-version-specific-runtime-libs –target=armv5tel-redhat-linux-gnueabi Thread model: posix gcc version 4.1.2 20070925 (Red Hat 4.1.2-33.fa1) This will only install the C compiler (gcc), to install the C++ compiler, run the following command: sudo yum install armv5tel-redhat-linux-gnueabi-gcc-c++ Tested in Fedora 12. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com