Operating Systems Category - Page 82 of 1012 - CNX Software

November 20, 2023November 18, 2023 by Sponsored Post - No Comments

US and UK Black Friday Deal for GEEKOM Mini IT11 mini PC (Sponsored)

Mini IT11 Core i7-11390H mini PC coupon code

GEEKOM has launched a Black Friday promotion with a deal for their Mini IT11 mini PC powered by an Intel Core i7-11390H quad-core/8-thread Tiger Lake processor with 32GB of RAM and a 1TB NVMe SSD for both US and UK customers. In the US, the GEEKOM Mini IT11 mini PC (32GB+1TB) now sells for just $449 US after using the coupon code cnxsoftware25, and British customers can also benefit from the offer by getting it for just ￡449 including taxes with the same coupon code. GEEKOM Mini IT11 (32GB+1TB) specifications: SoC – Intel Core i7-11390H quad-core/8-thread Tiger Lake processor @ up 2.9 GHz / 5.0 GHz (Turbo) with 12MB cache, 96EU Intel Iris Xe graphics @ 1.40 GHz; TDP: 28W/35W System Memory – 32GB DDR4 SO-DIMM dual-channel memory, upgradeable up to 64GB Storage 1TB SSD (2280 M.2 PCIe), upgradeable up to 2TB 2.5-inch SATA HDD bay (up to 7mm thick), […]

November 18, 2023January 3, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

GEEKOM A5 Review – Part 2: Windows 11 Pro tested on an AMD Ryzen 7 5800H Mini PC

After unboxing GEEKOM A5 mini PC, checking out the hardware, and booting the device in the first part of the review, we’ve now had time to further test the AMD Ryzen 7 5800H mini PC with Windows 11 Pro operating system. The boot-up is quite fast and generally speaking the device performs well for the various tasks we ran on the mini PC. So in the second part of the GEEKOM A5 review, we will provide an overview of the system information, test features, perform benchmarks, check heat dissipation under load, and measure the power consumption of the mini PC while running on Windows 11 Pro. Software Overview and Feature Testing Going to System->About in Windows settings, we can confirm that the GEEKOM A5 mini PC is equipped with an AMD Ryzen 7 5800H processor clocked at 3.20 GHz (base frequency) and 32GB of RAM, and runs Windows 11 Pro […]

November 17, 2023November 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Allwinner VPU gets open-source Linux driver for its H.264 hardware video encoder

Allwinner V3s open source Linux video encoding driver

Long-time readers of CNX Software may remember Bootlin’s crowdfunding campaign launched in 2018 to bring open-source Allwinner VPU drivers to take care of hardware video encoding and decoding in mainline Linux. They managed to raise enough funds (over 30,000 Euros) from small donors and several companies (Olimex, Pine64, Libre Computer, FriendlyELEC, and Orange Pi) to work on open-source VPU drivers for mainline Linux, but only for MPEG2, H264, and H265 decoding for in a range of Allwinner SoCs such as the A20 and H5, but not quite enough to cover the cost of H264 video encoding. Five years later, Bootlin took it upon themselves to complete the work without backing or support from Allwinner and have now released an open-source Linux-kernel based V4L2 driver to support the H.264 video encoder found in Allwinner V3, V3s, and S3 camera SoCs. The new driver builds upon earlier work by the company to […]

November 17, 2023November 17, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON PICO-ADN4 Pico-ITX Alder Lake-N SBC features Processor N50 to Atom x7425E SoC

AAEON PICO-ADN4 Pico-ITX SBC comes with a choice of four Alder Lake-N processors – Processor N50, Processor N97, Core i3-N305, or Atom x7425E – and is available in SKUs with both standard (0°C ~ 60°C) and wide-temperature (-40°C ~ 85°C) ranges for industrial applications. The single board computer comes with up to 16GB LPDDR5, SATA and mSATA storage, three display interfaces (HDMI, eDP/LVDS, DDI), dual Ethernet with 2.5GbE and GbE RJ45 ports, USB 3.2 Gen 2 ports, and M.2 and mPCIe sockets for expansion. The board supports 12V DC power input by default, but AAEON company offers a 9V to 36V DC input option. PICO-ADN4 specifications: Alder Lake-N SoC (one or the other) Intel Processor N50 dual-core processor up to 3.4 GHz with 6MB cache, 16EU Intel UHD Graphics; TDP: 6W Intel Processor N97 quad-core processor up to 3.6 GHz with 6MB cache, 24EU Intel UHD Graphics; TDP: 12W Intel […]

November 16, 2023November 17, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Nordic introduces nRF7002 EK WiFi 6 Arduino Shield, nRF7000 SSID-based Wi-Fi locationing chip

Nordic Semi has launched the nRF7002 EK based on the company’s nRF7002 dual-band WiFi 6 IoT chip and in the form of an Arduino shield that works with other Nordic development kits such as the nRF52840 DK, nRF5340 DK, and nRF9160 DK, and separately, the company launched the nRF7000 SSID-based Wi-Fi locationing chip. nRF7002 EK Earlier this year, the company launched the nRF7002 DK, a complete development kit with the nRF7002 WiFi 6 chip and the nRF5340 dual-core Arm Cortex-M33 wireless microcontroller, but for developers who already own nRF devkits, they’ve now introduced the nRF7002 EK Arduino Shield. nRF7002 EK specifications: Wireless chip – Nordic Semi nRF7002 Dual-band Wi-Fi 6 (802.11ax) WiFi station mode Target Wake Time (TWT) 20 MHz channel bandwidth Antenna – 2.4 and 5 GHz antenna for WiFi SWF port for RF measurement Host interface – SPI or QSPI interfaces Dimensions – Arduino shield form factor The […]

November 15, 2023June 11, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Renesas RZ/G2UL Arm Cortex-A55/Cortex-M33 industrial system-on-module sells for as low as $17 in volume

MYiR Tech MYC-YG2UL is a tiny (39x37mm) system-on-module based on the Renesas RZ/G2UL SoC with a 1GHz Arm Cortex-A55 application core and 200MHz real-time Cortex-M33 cores designed for industrial HMIs and gateways, and the company has also launched the MYD-YG2UL development board with the module and interfaces such dual gigabit Ethernet, RS485, RS232, CAN Bus, and more. MYC-YG2UL Renesas RZ/G2UL CPU module Specifications: SoC – Renesas RZ/G2UL (Type-I) CPU – Arm Cortex-A55 processor at up to 1 GHz MCU – Arm Cortex-M33 clocked at up to 200 MHz GPU – 2D graphics (Image Scaling Unit) System Memory – 512MB DDR3L Storage – 4GB eMMC flash, 4KB EEPROM 1.0mm pitch 140-pin castellated holes and 50-pin LGA Display – RGB LCD interface Camera – MIPI CSI interface Networking – 2x RGMII (gigabit Ethernet) USB – 2x USB 2.0 Analog – 2x ADC Other I/Os – 5x SCIF, 2x SCI, 2x CAN FD, 4x […]

November 15, 2023November 16, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AMD Ryzen Embedded 7000 Zen 4 SoC integrates Radeon RDNA 2 graphics, up to 28 lanes of PCIe 5 connectivity

AMD Ryzen Embedded 7000 Series is a new “Zen 4” processor with integrated Radeon RDNA 2 graphics designed for high-performance embedded systems targetting industrial automation, machine vision, robotics, and edge servers. The last two Ryzen Embedded families from AMD, namely the Ryzen Embedded V3000 and Ryzen Embedded 5000, mostly targeted headless networking and storage applications since the processors lacked any 3D GPU. But the new Ryzen Embedded 7000 processors bring back graphics with a Radeon RDNA 2 GPU clocked at up to 2.2 GHz and also come with up to 12 Zen4 cores clocked at up to 5.4 GHz, and feature up to 28 lanes of PCIe 5 connectivity. Ryzen Embedded 7000 Series specifications: CPU – Up to 12-core/24-thread “Zen 4” processor GPU – Radeon RDNA 2 graphics 1WGP @ 2.2GHz max with support for AV1/VP9 decode, H.264/HEVC decode/cncode Cache – Up to 1MB L2 cache/Core, up to 32MB L3 […]

November 15, 2023November 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Giveaway Week 2023 winners announced!

CNX Software’s Giveaway Week 2023 is now over and we’re ready to announce the winners. We offered some of the review samples we tested (or not) in the last year, and like the last two years, we were also joined by RAKwireless who offered two IoT development kits. All items given away are shown in the photo below, minus some accessories, and if you count more than seven you’d be right, as some are kits with multiple items like the GL.iNet GL-S200 Thread Border router which comes with three development boards, and more importantly, we also organized Giveaway Week on CNX Software Thailand for the second year running. We had seven winners on CNX Software: VOIPAC iMX8M industrial development kit – Kraingsak, Thailand TBS7901 mini PCIe DVB-S2X/S2 module – Frank, Singapore RAKWireless WisBlock IoT Starter Kit – Andy, Russia GL.iNet GL-S200 Thread Border router kit – Augustin, Argentina WCH CH583M-R0-1v1 […]