Operating Systems Category - Page 33 of 1010 - CNX Software

July 18, 2024July 18, 2024 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MW-100-NAS Intel N100 motherboard features six SATA ports, two M.2 PCIe sockets, 2.5GbE and 10GbE interfaces

The MW-100-NAS mini-ITX motherboard is powered by an Intel Processor N100 Alder Lake-N CPU and seems especially suited for NAS (networked-attached storage) applications with six SATA connectors, two M.2 Key-M sockets for NVMe drivers, one 10GbE port, and two 2.5GbE RJ45 jacks. The motherboard supports up to 32GB DDR5 memory, features HDMI and DisplayPort video output ports, a COM port header, and plenty of external and internal USB interfaces. It takes power from a standard ATX connector. NW-N100-NAS motherboard specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – Up to 32GB DDR5-4800 via SO-DIMM socket Storage 2x M.2 sockets for NVMe SSDs onboard 6x SATA connectors MicroSD card slot Video Output – 1x HDMI, 1x DisplayPort Networking 2x 2.5GbE RJ45 ports via Intel i226-V controllers 1x […]

July 18, 2024July 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Panthor open-source driver achieves OpenGL ES 3.1 conformance with Arm Mali-G610 GPU (RK3588 SoC)

Panthor OpenGL ES 3.1 conformance Mali G610

Collabora has just announced that the Panthor open-source GPU kernel driver for third-generation Arm Valhall GPUs (Arm Mali-G310, Mali-G510, Mali-G610, and Mali-G710) has now achieved OpenGL ES 3.1 conformance with the Arm Mali-G610 GPU found in the Rockchip RK3588 SoC. Just a few days ago, Linux 6.10 was released with “support for Mali CSF-based GPUs found on recent Arm SoCs from Rockchip or Mediatek”, as expected from the earlier article entitled “Panthor open-source driver for Arm Mali-G310, Mali-G510, Mali-G610, and Mali-G710 GPUs to be part of Linux 6.10” published last March. But this did not say anything about the level of support for the Valhall GPU since it’s common for new hardware to be added with minimal support, and OpenGL ES 3.1 compliance means it’s ready for business… Collabora’s announcement explains this was tested on a Radxa Rock 5B single board computer: The conformance tests ran on a Rock5b board […]

July 17, 2024 by Debashis Das - 4 Comments

ASRock IMB-A8000 industrial Ryzen Embedded 8000 mini-ITX motherboard takes up to 96GB DDR5 RAM

ASRockI MB A8000 Mini ITX Industrial Motherboard

ASRock Industrial recently launched the IMB-A8000, an industrial and embedded motherboard in a mini-ITX form factor. As an embedded motherboard, it is powered by AMD Ryzen Embedded 8000 series APU which features 8 cores and 16 threads, built with 4nm technology, and including a 16 TOPS AI accelerator. The motherboard supports up to 96GB of dual-channel DDR5-5600MHz memory and includes one 2.5GbE LAN port and one GbE LAN port. With a wide temperature range of -20ºC to 70ºC this motherboard can be used in applications like manufacturing, robotics, machine vision, and more. Previously we have seen SolidRun introduce the Bedrock R8000 industrial PC built around the Ryzen Embedded 8000 APU family. Other than that we have written about other Ryzen Embedded mini-ITX motherboards/SBCs such as the Flex Logic InferX Hawk combining an AMD Ryzen Embedded R2314 SoC with AI accelerators, the DFI RNO171 with Ryzen Embedded V2000 family, or more […]

July 17, 2024July 18, 2024 by Tomisin Olujinmi - 3 Comments

RK3568-based MYC-LR3568 system-on-module comes with up to 8GB RAM, 32GB storage for cost-sensitive Edge AI applications

MYIR Tech has announced the release of the Rockchip RK3568-based MYC-LR3568 Edge AI system-on-module (SoM) offered in a compact 381-pin expansion LGA package design. It features up to 8GB LPDDR4 RAM, 32GB eMMC flash storage, a power management integrated circuit, and various connectivity options. The base configuration of the MYC-LR3568 system-on-module offers only 2GB RAM and 16GB storage but the module supports up to 8GB RAM and 32GB eMMC storage. It supports several video codecs, including 4K 60fps H.265/H.264/VP9 decoding and 1080P 60fps H.265/H.264 encoding, for high-quality video playback and recording. The MYC-LR3568 SoM works with Debian and Linux operating systems. It is designed for cost-sensitive industrial applications including but not limited to IoT gateways, NVR storage, industrial control, human-machine interface (HMI), cloud terminals, and facial recognition systems. MYIR Tech’s MYC-LR3568 specifications: SoC – Rockchip RK3568 (B2 or J variant) CPU RK3568B2 – Quad-core processor with four Cortex-A55 cores @ 2.0 […]

July 17, 2024July 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Cervoz unveils tiny M.2 2230 2.5GbE PCIe expansion card

Cervoz M.2 2230 2.5GbE PCIe expansion card

Cervoz MEC-LAN-2631i is a tiny, industrial-grade M.2 2230 (A+E key) PCIe Ethernet expansion card adding 2.5GbE networking to any system with a spare M.2 socket with a PCIe x1 interface. The card could be useful in case you want to add an extra 2.5GbE port, or for a system that lacks wired networking. It’s based on the Intel I226-IT 2.5Gbps Ethernet controller and can operate in the -40°C to 85°C temperature range as an industrial-grade module. Cervoz MEC-LAN-2631i specifications: Host interface – M.2 edge connector with PCIe 2.1 x1 up to 5.0/2.5GT/s Network – 10/100/1000/2500Mbps isolated interface based on an Intel I226-IT controller with an RJ45 port on a separate module Power Consumption – 350mA @ 3.3V Safety – Surge protection up to 2kV Dimensions – 30 x 22 mm; M.2 2230 (A+E key) form factor Temperature Range – Operating: -40°C to 85°C; storage: -40°C to 125°C Mounting – Cervoz’s […]

July 16, 2024July 17, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON AQ7-ADN – A Qseven 2.1 system-on-module with Intel Alder Lake-N CPU, four PCIe Gen 3 x1 interfaces

AAEON AQ7-ADN Alder Lake-N Qseven system-on-module

AAEON AQ7-ADN is a Qseven 2.1-compliant system-on-module based on Atom Processors x7425E, Intel Processor N, or Intel Core i3-N305 Alder Lake-N processor equipped with up to 8GB LPDDR5x and 64GB of eMMC flash storage. AAEON has already introduced Alder Lake-N COM Express and SMARC modules with the COM-ADNC6 and uCOM-ADN respectively, and the AQ7-ADN adds another system-on-module standard to its list of Alder Lake N-Series modules with a Qseven 2.1 SoM that offers four PCIe Gen x1 interfaces and a SATA storage interface. AAEON AQ7-ADN specifications: Alder Lake N-series SoC (one or the other) Intel Atom x7425E quad-core processor up to 3.4 GHz with 6MB cache, 24EU Intel UHD Graphics @ 1.00 GHz; TDP: 12W Intel Processor N50 dual-core processor up to 3.4 GHz with 6MB cache, 16EU Intel UHD Graphics @ 750 MHz; TDP: 6W Intel Processor N97 quad-core processor up to 3.6 GHz with 6MB cache, 24EU Intel […]

July 16, 2024 by Debashis Das - 1 Comment

Recore A8 – An Allwinner A64-powered 3D printer control board with TMC2209 stepper drivers

Recore A8 all in one desktop 3D printers control board

The Recore A8 is an all-in-one 3D printer control board built around the Allwinner A64 SoC. The board includes six soldered TMC2209 stepper motor drivers, cooled by an 8-layer PCB for durability. To make the connection better the board features industry-standard JST PH connectors for secure cable connections. Most of the connectors are flexible and support end-stops, Neopixels, servos, inductive probes, and BLTouch. Two Expansion headers on the board allow for two additional stepper motor drivers. Additionally, the board supports various temperature sensors, including regular thermistors, thermocouples, and PT100/PT1000 sensors (PT100 requires an extra board). Elias Bakken has been working on this board since 2019 and in our post about the earlier Recore A5, we have seen how Elias leverages Allwinner A64’s 300 MHz AR100 core to control real-time I/Os. Recore A8 specifications: SoC – Allwinner A64 quad-core Cortex-A53 processor running at 1 GHz, with AR100 32-bit core @ 300 MHz, Mali-400MP2 […]

July 15, 2024July 15, 2024 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Rockchip RKLLM toolkit released for NPU-accelerated large language models on RK3588, RK3588S, RK3576 SoCs

Rockchip RKLLM toolkit (also known as rknn-llm) is a software stack used to deploy generative AI models to Rockchip RK3588, RK3588S, or RK3576 SoC using the built-in NPU with 6 TOPS of AI performance. We previously tested LLM’s on Rockchip RK3588 SBC using the Mali G610 GPU, and expected NPU support to come soon. A post on X by Orange Pi notified us that the RKLLM software stack had been released and worked on Orange Pi 5 family of single board computers and the Orange Pi CM5 system-on-module. The Orange Pi 5 Pro‘s user manual provides instructions on page 433 of the 616-page document, but Radxa has similar instructions on their wiki explaining how to use RKLLM and deploy LLM to Rockchip RK3588(S) boards. The stable version of the RKNN-LLM was released in May 2024 and currently supports the following models: TinyLLAMA 1.1B Qwen 1.8B Qwen2 0.5B Phi-2 2.7B Phi-3 […]