Operating Systems Category - Page 280 of 1028 - CNX Software

December 9, 2020 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Google’s Fuchsia OS is now open to public contributions, gets a “roadmap”

We were first made aware of Fuchsia OS, an open-source operating system developed by Google, in 2016. At the time, nobody clearly knew what was the goal of the project, although some speculated it could be a Linux replacement. We first wrote about it in 2018, as Fuchsia OS added support for several Amlogic processors hinting that it may be used in TV boxes and media streamers. Google also launched a developer website in 2019 to provide more information and resources to people outside the company interested in trying it out. But while the OS development was always made in the open with the source code publicly available, Google did not accept contributions from the community so far. This has now changed, as the company just announced the expansion of Fuchsia’s open-source model to make it easier for the developer community to contribute to the project. Specifically, Google has set […]

December 8, 2020December 8, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Raspberry Pi 4 gets a 13MP 4K MIPI camera devkit for $99

The Raspberry Pi boards already have their official 4K MIPI camera with Raspberry Pi HQ camera based on a 12.3MP Sony sensor module that sells for $75 and up with a lens. But e-Con Systems still decided to launch their own 13MP 4K MIPI camera development kit for Raspberry Pi 4 which they currently sell for $99 plus shipping. At first, I dismissed the news, but let’s have a look if there may be some advantages in using that camera devkit. e-CAM130_CURB camera devkit specifications: e-CAM137A_CUMI1335_MOD 13.0 MP camera module with S-mount lens holder, ON Semiconductor AR1335 13MP 1/3.2″ CMOS image sensor Image Signal Processor (ISP) for auto functions such as auto white balance, auto exposure control as well as optional MJPEG compression. Resolutions and frame rates VGA (640 x 480) – 110 fps HD (1280 x 720) – 72 fps Full HD (1920 x 1080) – 60 fps 4K […]

December 8, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Android’s 3D mapping aided GPS enables improved urban GPS accuracy

One of the best features of smartphones is GNSS location with standards like GPS that allows you to get directions or share your location with friends or business contacts. It works great in most cases, but getting an accurate location may be challenging in urban areas due to tall buildings that block the signal to the satellites and create reflections. This can be an issue for ride-sharing apps for example, as the applications may detect the wrong side of the street you are on, either forcing the client to cross the street (when possible) or the driver to take a detour to reach your location. This problem may soon go away in Android phone thanks to 3D mapping aided GPS corrections. So how does that work exactly? Google explains: The 3D mapping aided corrections module includes tiles of 3D building models that Google has for more than 3850 cities around […]

December 7, 2020December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Industio 7-inch smart display features SigmaStar SSD201 SoM, WiFi and Ethernet

We previously covered the $10 Industio IDO-SOM2D01 module based on SigmaStar SSD201 Cortex-A7 processor with 64MB RAM built-in, 128MB SPI NOR flash, and designed for full HD smart displays. Today I learned Industio was the design team of system-on-module for Wireless Tag, and the latter is the only distributor of Industio branded products. The company also informed us about Industio IDO-SBC2D70 7-inch smart display based on the aforementioned SSD201 or SSD202 module and connected over Ethernet or WiFi. Industio IDO-SBC2D70 smart display specifications: SoM – Industio IDO-SOM2D01 with SoC – SigmaStar SSD201/SSD202 dual-core Cortex-A7 processor @ 1.2 GHz with 2D GPU, 64MB DDR2 (SSD201) or 128MB DDR3 (SSD202) Storage – 128MB SPI NAND flash (option up to 512MB) Video Decoder – H.264/H.265 up to 1920×1080 @ 60 fps Dimensions – 2.95 x 2.95 cm Storge – MicroSD card socket (SDIO 2.0) Display – 1024 x 600 IPS RGB module by […]

December 7, 2020December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

AI Gateway combines Raspberry Pi Compute Module 4 with Google Coral Edge TPU

Techbase quickly unveiled an update to their Modberry industrial controllers with Modberry 500 CM4 DIN Rail computer as soon as Raspberry Pi Compute Module 4 was launched. The company has now introduced another Raspberry Pi CM4 based product with ModBerry AI GATEWAY 9500-CM4 gateway combining the Broadcom BCM2711C0 system-on-module to Google Edge TPU to cater to applications leveraging AI acceleration. ModBerry AI GATEWAY 9500-CM4 preliminary specifications: SoM – Raspberry Pi Compute Module 4 AI accelerator – Google Coral Edge TPU module with up to 4 TOPS connected over the RPi CM4’s PCIe interface Peripherals (customizable as needed) USB, HDMI, and Ethernet. Serial RS-232/485 ports Digital and analog I/Os with or without opto-isolation Relays, 1-Wire, CAN bus, M-Bus Master and Slave PCIe modules for wireless support Cellular – 4G/LTE and 5G modem, interchangeable with Coral TPU, plus on-board eSIM LPWAN – NB-IoT, LoRa, Sigfox, Wireless M-Bus ZigBee Additional Wi-Fi/Bluetooth interface or […]

December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

DR6018-S is a more compact, cheaper WiFi 6 SBC with optional WiFi 6E

Earlier this year we wrote about Wallys Communications DR6018-V2 WiFi 6 embedded router board based on Qualcomm IPQ6010 processor with M.2 sockets for optional 5G and WiFi 6E cards. The company has now launched a more compact, and cheaper board with DR6018-S SBC based on the same processor with 802.11ax WiFi 6 and 802.11 b/g/n/ac WiFi 5 support, plus an M.2 socket for people wanting to add WiFi 6E cards. DR6018-S board specifications: SoC – Qualcomm Atheros IPQ6010 quad-core Arm Cortex-A53 processor @ 1.8 GHz System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, optional SD card slot Networking Wired – 2x Gigabit Ethernet port including one with PoE support Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, max 20dBm per chain 4x u.FL connectors […]

December 3, 2020April 30, 2021 by Abhishek Jadhav - 2 Comments

Compact Jetson Xavier NX/ Nano open hardware baseboard supports Android

When it comes to NVIDIA Jetson family of modules, we should understand that NVIDIA Jetson Nano is for makers and STEM education, while Xavier NX is more geared towards professional and commercial use. The compute module Xavier NX was announced before the development kit, which includes the module and reference carrier board and otherwise for NVIDIA Jetson Nano. There are some third-party carrier boards & edge computers available for Jetson Xavier NX and Jetson Nano, including DesignCore Carrier Board and Diamond FLOYD Carrier Board. Antmicro, a custom hardware, software, and AI engineering company, came up with a compact open hardware device: Jetson Nano/ Xavier NX baseboard. It supports both NVIDIA Jetson Nano SoM as well as the Xavier NX SoM. The board is designed to put NVIDIA’s versatile module at the heart of cutting-edge projects and drive innovation in areas such as AI/ML, drones, medical and industrial object recognition systems. […]

December 2, 2020December 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

PinePhone KDE Community Edition smartphone with Plasma Mobile now up for pre-order

PinePhone Linux phone first launched as an early adopter phone without any OS when the “Brave Edition” was first introduced in November 2019. Since then Pine64 launched variant with different Linux mobile OS including PinePhone Community Edition: UBports, the PostMarket Edition that also added support for mobile/desktop convergence with a model with more RAM and storage, as well as a USB-C Dock, and more recently there was a batch with PinePhone Manjaro Community Edition. If you haven’t already gotten your hand on one of the earlier models, you’ll be glad to know the PinePhone KDE Community Edition is now available for pre-order for the same $149.99 price tag for the phone only or $199.99 with the convergence package. PinePhone comes with Allwinner A64 quad-core Cortex-A53 processor that been around for many years. It’s not a performance beast, but it’s well supported by the open-source Linux community, and affordable. For $150, […]