Operating Systems Category - Page 178 of 1027 - CNX Software

August 2, 2022August 2, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

reComputer J101/J202 carrier boards are designed for Jetson Nano/NX/TX2 NX SoM

Seeed Studio’s reComputer J101 & J202 are carrier boards with a similar form factor as the ones found in NVIDIA Jetson Nano and Jetson Xavier NX developer kits, but with a slightly different feature set. The reComputer J101 notably features different USB Type-A/Type-C ports, a microSD card, takes power from a USB Type-C port, and drops the DisplayPort connector, while the reComputer J201 board replaces the micro USB device port with a USB Type-C port, adds a CAN Bus interface, and switches to 12V power input instead of 19V. The table below summarizes the features and differences between the Jetson Nano devkit (B1), reComputer J101, Jetson Xavier NX devkit, and reComputer J202. Note the official Jetson board should also support production SoM with eMMC flash, but they do ship with a non-production SoM with a built-in MicroSD card socket instead. The carrier boards are so similar that if NVIDIA would […]

August 1, 2022August 1, 2022 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Linux 5.19 Release – Main changes, Arm, RISC-V and MIPS architectures

Linus Torvalds has just announced the release of Linux 5.19. It should be the last 5.xx version, with Linux 6.0 coming for the next cycle: So here we are, one week late, and 5.19 is tagged and pushed out. The full shortlog (just from rc8, obviously not all of 5.19) is below, but I can happily report that there is nothing really interesting in there. A lot of random small stuff. In the diffstat, the loongarch updates stand out, as does another batch of the networking sysctl READ_ONCE() annotations to make some of the data race checker code happy. Other than that it’s really just a mixed bag of various odds and ends. On a personal note, the most interesting part here is that I did the release (and am writing this) on an arm64 laptop. It’s something I’ve been waiting for for a _loong_ time, and it’s finally reality, […]

August 1, 2022August 1, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

MECOOL KP1 projector review – Part 2: Android 11 TV OS and Full HD clarity

In the first part of MECOOL KP1 smart projector review, I checked out the package content, projector design, and integrated HDMI stick running Android 11 TV, before going through the setup wizard, and trying the projector with Android 11. I’ve now spent more time with the device, so I’ll report my overall experience. The best way to install the projector is probably to mount it on a ceiling or a wall, but in my case, I just placed it on top of a shelf itself placed on top of a table to adjust the height for a comfortable viewing experience from our comfy seats. As we’ve seen before, the projector will boot directly to the Android 11 TV launcher from the included MECOOL KD5 TV stick. Android 11 TV OS runs on top of Linux 5.4.125, as we can see it’s a Hailstorm device that’s certified for Netflix and an […]

July 30, 2022July 31, 2022 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Allwinner H618 processor powers Android 12 TV boxes

Allwinner H618 processor has started to show up in several TV boxes running Android 12, and capable of playing 6K/4K VP9 and H.265 videos with devices such as T95Z Plus and T95 Max, which may be confusing, as companies are reusing those model numbers over and over. Featuring a quad-core Cortex-A53 processor, an Arm Mali-G31 MP2 GPU, and 6K video support, the Allwinner H618 looks exactly like the Allwinner H616 processor except it can run the more recent Android 12 operating system. There’s not much public information about Allwinner H618 at the time of writing, but let’s check T95Z Plus specifications to see if we can find any other new hidden features: SoC – Allwinner H618 quad-core Arm Cortex-A53 processor @ up to 1.5GHz with Arm Mali-G31 MP2 GPU System Memory – 2GB or 4GB RAM Storage – 16GB, 32GB, or 64GB eMMC flash, MicroSD card socket Video Output HDMI […]

July 29, 2022January 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SolidRun introduces SolidWAN software-defined edge network hardware with NXP LX 16-core Cortex-A72 SoCs

SolidRun has launched two SolidWAN Linux-based system-level solutions for software-defined wide area networks and network security applications with the SolidWAN Single LX2162 based on NXP LX2162 16-core Cortex-A72 SoC designed for small offices (SoHo) and SMBs, and the SolidWAN Dual LX2160 equipped with two NXP LX2160A 16-core Cortex-A72 networking processors targetting enterprise and edge data center applications. SolidWAN Single LX2162 Hardware specifications: SoC – NXP Layerscape LX2162A 16-core Arm Cortex A72 processor @ up to 2GHz System Memory – Up to 32GB DDR4 Storage – 8GB eMMC flash, MicroSD card slot Networking 8x dedicated Gigabit Ethernet ports 2x SFP 10GbE cages 2x SFP 25GbE cages USB – 1x USB 3.0 port Expansion card I/Os Mini PCIe socket with SIM holder for 4G LTE cellular connectivity Mini PCIe socket for WiFi AP mPCIe module Management USB to STM32 for remote management RunBMC compliant socket Development and Debug interfaces – Mini USB, […]

July 28, 2022July 5, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Review of SunFounder TS7-Pro 7-inch touchscreen display for Raspberry Pi 4

Unboxing SunFounder TS7-Pro touchscreen display SunFounder TS7-Pro is a 7-inch touchscreen display designed for Raspberry Pi 4 board and the company sent us one review sample for evaluation. SunFounder has a wide range of Raspberry Pi and Arduino accessories designed for makers, and the TS7-Pro 7 is their latest offering that’s optimized to work with Raspberry Pi 4 and Raspberry Pi 3. Adding a touchscreen display to a Raspberry Pi may be a bit messy with the display or other accessories such as cameras and/or 2.5-inch drive spread on the table, but the TS7-Pro display simplifies all that with a neater assembly. Let’s start the review with an unboxing The package is compact and the display is well-protected with polyethylene foam to reduce the risk of damage during transport. Accessories such as cables, screws and nuts, adapters, an acrylic enclosure, and a screwdriver are also included in the package. Here’s […]

July 27, 2022July 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

ZOTAC ZBOX PI336 PICO mini PC gets an Elkhart Lake upgrade with Intel Celeron N6211

The last time we wrote about the ZOTAC ZBOX PICO PI336 mini PC it featured an Intel Celeron N4100 Gemini Lake processor, but the company appears to have launched an upgrade with an Intel Celeron N6211 Elkhart Lake processor instead. The new ZBOX PI336 PICO fanless mini PC also gets more storage up to 128GB eMMC flash, but the rest of the specifications remain pretty much the same with 4GB RAM, HDMI & DisplayPort video outputs, three USB ports, Gigabit Ethernet, WiFI, and Bluetooth, although some of the interfaces got a version bump for additional performance. ZOTAC PI336 specifications: SoC – Intel Celeron N6211 dual-core Elkhart Lake processor up to 1.2/3.0 GHz with 16EU Intel UHD Graphics @ up to 750 MHz; 6.5W TDP System Memory – 4GB LPDDR4x 3200MT/s Storage – 128GB eMMC flash, microSD card socket Display HDMI 2.0 up to 3840×2160 @ 60Hz DisplayPort 1.4 up to […]

July 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

mini PCIe module features Rockchip RK1808K SoC with 3.0 TOPS NPU

Toybrick RK1808 mPCIe AI accelerator card

Rockchip RK1808 SoC with a built-in 3.0 TOPS AI accelerator has been around since 2019, and we’ve seen it in USB compute sticks, SBCs, and even in Pine64 SoEdge-RK1808 SO-DIMM module, but somehow never in the more widely used M.2 or mPCIe form factors. Toybrick TB-RK1808M0 changes that and offers Rockchip RK1808K SoC coupled with 1GB RAM and an 8GB eMMC flash in a mini PCIe module that exposes USB 3.0, USB 2.0, UART, and GPIO signals. Toybrick TB-RK1808M0 specifications: SoC – Rockchip RK1808K CPU – Dual-core Cortex-A35 processor @ up to 1.4 GHz AI Accelerator – 3.0 TOPS NPU for INT8 inference (300 GOPS for INT16, 100 GFLOPS for FP16) VPU – 1080p60 H.264 decode, 1080p30 H.264 encode System Memory – 1GB DDR Storage – 8GB eMMC flash Host interface – Mini PCIe edge connector with USB 3.0, USB 2.0, UART, and GPIO Misc – Heatsink for cooling Supply […]