Operating Systems Category - Page 125 of 1021 - CNX Software

April 24, 2023April 24, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 6.3 release – Notable changes, Arm, RISC-V and MIPS architectures

Linux Torvalds has just announced the release of Linux 6.3 on the Linux Kernel Mailing List (LKML): It’s been a calm release this time around, and the last week was really no different. So here we are, right on schedule, with the 6.3 release out and ready for your enjoyment. That doesn’t mean that something nasty couldn’t have been lurking all these weeks, of course, but let’s just take things at face value and hope it all means that everything is fine, and it really was a nice controlled release cycle. It happens. This also obviously means the merge window for 6.4 will open tomorrow. I already have two dozen pull requests waiting for me to start doing my pulls, and I appreciate it. I expect I’ll have even more when I wake up tomorrow. But in the meantime, let’s enjoy (and test) the 6.3 release. As always, the shortlog […]

April 22, 2023April 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

HARDWARIO CHESTER – A configurable Zephyr OS LPWAN IoT gateway with LoRaWAN, LTE IoT, GNSS connectivity

HARDWARIO CHESTER platform is a configurable LPWAN IoT gateway whose main function is to connect as many devices and environments as possible to the Internet using connectivity such as LoRaWAN, LTE Cat M1, or NB-IoT, as well as GNSS for geolocation. Contrary to most IoT gateways, it does not run Linux on an application processor, and instead, the “brain” of the CHESTER IoT gateway is a Raytac Bluetooth 5.0 module based on a Nordic Semi nRF52840 Arm Cortex-M4 microcontroller running Zephyr real-time operating system, which connects to LTE IoT modem and a LoRaWAN module through UART, and expansion modules through I2C, 1-wire, and GPIO interfaces. HARDWARIO CHESTER specifications: Wireless modules/chips Raytac MDBT50Q-P1MV2 Bluetooth 5.0 module based on Nordic Semi nRF52840 Arm Cortex-M4F MCU with 1MB Flash memory, 256kB RAM Nordic Semi nRF9160-SICA-B1A-R7 LTE-M/NB-IoT system-in-package (SiP) with Arm Cortex-M33 MCU, 1024 KB flash, 256 KB SRAM Murata CMWX1ZZABZ-078 LoRa module as […]

April 21, 2023August 2, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Maxtang ALN-10 – An Alder Lake-N mini-ITX motherboard for industrial applications

Maxtang ALN-10 is an upcoming mini-ITX motherboard based on Alder Lake-N processors from the Processor N50 up to the Core i3-N305 SoC and specifically targetting industrial applications with a -20 to +60°C temperature range, six RS232/RS485 serial ports, and 12V to 19V DC input among other features. Since the latest Alder Lake N-Series processors were announced, we’ve seen a range of mini PCs based on the new series, some laptops, as well as a camera devkit and one single board computer, but so far no actual motherboards. Maxtang ALN-10 changes that with the industrial mini-ITX motherboard soon expected to launch for B2B customers. Maxtang ALN-10 specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor up to 3.8 GHz (Turbo) with 6MB cache, 32EU Intel UHD graphics; TDP: 15W (Active cooling) Intel Core i3-N300 octa-core processor up to 3.8 GHz (Turbo) with 6MB cache, 32EU Intel UHD […]

April 20, 2023April 23, 2023 by Sponsored Post - 7 Comments

GEEKOM AS 6 AMD Ryzen 6000 mini PC takes on Intel NUC 13 Pro “Arena Canyon” (Sponsored)

GEEKOM AS 6 is an AMD Ryzen 6000 mini PC developed in collaboration with ASUS that aims to provide a cost-effective alternative to the Intel NUC 13 Arena Canyon mini PC powered by an Intel Core i7-1360P Raptor Lake-P hybrid SoC. The mini PC is equipped with either an AMD Ryzen 9 6900HX or Ryzen 7 6800H processor, supports up to 64GB DDR5 memory, three storage options with two NVMe sockets and one 2.5-inch SATA drive bay, and can drive up to four independent displays thanks to two HDMI 2.1 ports, one DisplayPort 1.4 output, and two Thunderbolt 4 / USB4 ports. Networking is the same as on the NUC with 2.5GbE, WiFi 6E, and Bluetooth 5.2. Here’s how GEEKOM AS 6 specifications compare the ones of the Intel NUC 13 Pro “Arena Canyon”. The performance of the selected AMD Ryzen 9 and Intel Raptor Lake processor is comparable, but […]

April 20, 2023April 19, 2023 by Leo Zachary - No Comments

100ASK-V853-Pro – A feature-rich Allwinner V853 board designed for AI vision applications

The 100ASK-V853-Pro board is a development kit consisting of an Allwinner V853 system-on-module board (SoM) and a feature-rich carrier board with a large number of interfaces. Allwinner V853 supports up to 1TOPS of NPU computing power and is mainly for AI vision application development. The core board contains a DDR and eMMC as well as a PMU chip (AXP2101) and is connected to the carrier board through a board-to-board connector. All the functional resources of the V853 are drawn out through the carrier board. The carrier board comes with 2-channels CSI camera interfaces as well as RGB and MIPI DSI display interfaces. Although 1 TOPS of AI computing power is not outstanding, the NPU can still be used to accelerate AI vision applications at the edge. The board also comes with four USB 2.0 ports (two Type-A, two Type-C), an 100Mbps Ethernet port, a 22-pin header for expansion, and five […]

April 19, 2023April 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

AAEON BOXER-8224AI – An NVIDIA Jetson Nano AI Edge embedded system for drones

BOXER 8224AI board AI Edge NVIDIA Jetson Nano embedded system

AAEON BOXER-8224AI is a thin and lightweight AI edge embedded system solution based on NVIDIA Jetson Nano system-on-module and designed for drones, or other space-constrained applications such as robotics. AAEON BOXER products are usually Embedded Box PCs with an enclosure, but the BOXER-8224AI is quite different as it’s a compact and 22mm thin board with MIPI CSI interfaces designed to add computer vision capability to unmanned areal vehicles (UAV), as well as several wafers for dual GbE, USB, and other I/Os. BOXER-8224AI specifications: AI Accelerator – NVIDIA Jetson Nano CPU – Arm Cortex-A57 quad-core processor System Memory – 4GB LPDDR4 Storage Device – 16GB eMMC 5.1 flash Dimensions – 70 x 45 mm Storage – microSD slot Display Interface – 1x Mini HDMI 2.0 port Camera interface – 2x MIPI CSI connectors Networking 2x Gigabit Ethernet via wafer connector (1x NVIDIA, 1x Intel i210) Optional WiFi, Bluetooth, and/or cellular connectivity […]

April 19, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

EVerest is an open-source software stack for car charging stations

EVerest open source car charging station software

EVerest is a software project initiated by PIONIX GmbH, but now part of the Linux Foundation’s LFEnergy initiative, whose primary goal is to develop and maintain an open-source software stack for EV charging infrastructure. EVerest supports multiple standards and it will run on any device from AC home chargers to public DC charging stations. I noticed the EVerest project in an upcoming talk at the Embedded Open Source Summit 2023 entitled ” EVerest: Electric Vehicle Chargers With Open Hardware and Software” and whose abstract reads in part: You will learn how to build your own electric vehicle charger using open hardware designs in combination with the EVerest open-source software stack for EV charging infrastructure. Following a quick introduction to EV charging technology, with explanations of the standards, protocols, and complexities involved, the talk will go into a deep dive into how you can build your own AC charging station. Reference […]

April 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

TI launches Simplelink CC3300/CC3301 WiFi 6, Bluetooth 5.3 LE companion IC for IoT applications

BP-CC3301 SimpleLink CC3301 WiFi 6 BLE BoosterPack plug in module

Texas Instruments has unveiled the SimpleLink CC33xx family of Wi-Fi 6 companion IC with optional Bluetooth 5.3 Low Energy designed to be connected to a microcontroller (MCU) or a microprocessor (MPU) for secure and power-efficient IoT devices, The SimpleLink CC3000 supports 2.4 GHz WiFi 6, and interfaces over SDIO, SPI, and/or UART to the host system, while the SimpleLink CC3301 also adds support for Bluetooth 5.3 LE. Both chips can operate in high-temperature environments up to 105ºC. Texas Instruments CC3300/CC3301 specifications: Wireless 2.4 GHz WiFi 6 (802.11ax) up to 50 Mbps; Support for TWT and OFDMA, multirole (Access Point and Station) CC3301 only – Bluetooth 5.3 Low Energy up to 2 Mbps WiFi and Bluetooth COEX Host interface – 4-bit SDIO or SPI, and UART to external MCU or MPU Security – FW authentication and anti-rollback protection, WPA2/WPA3, Secured host interface Pacakge – 40-pin QFN package (5×5 mm) Temperature range […]