CNX Software – Embedded Systems News
Reviews, tutorials and the latest news about embedded systems, IoT, open-source hardware, SBC's, microcontrollers, processors, and more
Operating Systems used in Embedded Devices
To use vi as an hexadecimal editor: vi doc.txt [esc] :%!xxd Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com
One of my reader had issues running Thin-clients ENTC Encore-1000 based on EP9307 and wanted to update the firmware in his systems. So I’ll explain how to access Linux, Windows XP or any other operating systems using a thin client based on Cirrus Logic EP9307 hardware. This is for reference only, and the performance may not be suitable for your environment/setup. One PC (server) is needed to run VNC (Virtual Network Computing) server for each remote desktop (i.e. each thin client), then the thin client can run the software without hard disk by just using the network connection. This can be used for checking emails, browsing internet, office applications, etc.. All resource heavy tasks are done on the server side whose specifications may be chosen to match the applications requirements. I’ll explain how to use Linux, but Windows XP (or any other operating systems for that matter) could also be […]
Ok, the title is a bit over the top but the Allgo tablet reference design running android would only cost around 35 USD to manufacture (15 dollars for the board, 15 dollars for the touch screen display and 5 dollars for the battery). So you’d be able to browse the web, read e-books, flicker through your pictures and access a wide range of applications through Google app store for less than 100 USD (retail) compared to the IPAD retail price of 499 USD that would seem like a bargain even though the performance is not as good as the IPAD (but still acceptable) as you can see in the video below. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com
Last month, I posted a blog entry about demo featuring Sigma Designs Android STB that was shown at CeBit last January. AFAIK this is still being developed and there is still no Android STB products based on Sigma Designs Chips that can be purchased. Earlier this month, another company Webia Technologies demo’ed an Android STB (HDMI 1080p – ARM 11) whose factory price would be 50 USD, which is well below the price of a similar Sigma Designs STB based on SMP8640 or SMP8650 series. They also showed a smaller box that can support 720p and selling for 25 USD (Factory price, not retail price). You can see the demo below showing both set-top-boxes. Interestingly enough, I was unable to find Webia Technologies website or other previous news about this company. All I found is Webia Technologies is supposedly registered in Hong Kong. Update: After searching which ARM-based solution may […]
If you have an HTC Touch Cruise (Polaris) running Windows Mobile 6.1, you may want to try out Android in this hardware. The good thing is that you do not need to remove Windows, but you can just bootstrap Linux from Windows Mobile. Just go to XDA Developers Forum below for further details: Android for HTC Touch Cruise Polaris or just follow the simple instructions below: Instructions to install Android in SDCard: Download either the 320×480 or 240×320 version Extract the content of the downloaded zip files to a temporary directory Rename default.polaris.txt to default.txt (rename or delete the original default.txt file) in andboot directory Copy extracted /andboot folder to the Root of your SDCard In your mobile phone, inside /andboot folder, Run HaRET, then hit “run” to launch android The first time, press Volume Up to start the installation and follow the menu instructions. If you don’t follow that […]
Here’s a demo of Android running on Sigma Designs SMP8654. They made their own GUI and start Android from there. To see the android part just go to 2:35 directly. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com
If some reasons you need to use sudo in a cron job, for example if you use ltib (Linux Target Image Builder) in a nightly build script, you may realize that it does not work by default and you may get the message: sudo: sorry, you must have a tty to run sudo In that case simply run visudo and comment out the line: #Default requiretty Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com
Less than a year ago, Sigma Designs released the SMP8652, a secure media processor “designed to provide the optimal price/performance configuration for thin client applications, which include IPTV set-top boxes, digital media adapters, and hybrid cable/IP thin clients.” SMP8652 provides cost savings compared to the SMP863X series, due the integration of functions such as Ethernet and USB – that allowed them to skip PCI support in their new chip – and better performance (500Mhz MIPS24K CPU). SMP8650 series processors also use the MRUA and DCCHD SDK that need to be purchased as for the previous generation of chips. [ad#Google Adsense – Wide Banner] You can also purchase more SDK from Sigma for SMP8652: Adobe Flash Lite Qt/Webkit Integration Java VM Some DRM SDK (e.g. Microsoft DRM)… As for SMP8630 series, SMP86520 series processors also have a MMU (as most of new chips nowadays) so that you won’t come across the […]
