OpenWrt Category - Page 37 of 40 - CNX Software

July 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Linux Based Zsun WiFi Card Reader Has Been Hacked Too…

A little while ago, I purchased Zsun SD111 W-Fi USB flash drive, and after several tentatives, I finally found a way to access the device’s serial console. Since then the company announced another wireless storage device with Zsun Wi-Fi card reader, and Zoobab decided to try to hack it too. Since the device is pretty hard to open without damaging the enclosure, connecting the serial pin was not really an option, and the first exploit was to input shell commands in the web interface SSID field… For example, entering reboot there, would indeed reboot the device. However, this would still not allow full shell access, and finally after a broader port scan, it was found out that TCP port 11880 was open for telnet daemon. You can then access the shell as root with the same password as SD111: “zsun1188”. For some reasons, telnet can’t work with the device, and […]

May 19, 2015May 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Olimex Announces RT5350F-OLinuXino and Evaluation Boards Availability

Olimex had been working on a small board with Ralink RT5350F processor for over a year, with delays mostly due to software development and undocumented registers. But RT5350F-OlinuXino is now available together with an evaluation board with tow relays, two Ethernet ports, and expansions headers, as well as a DIN EBV still in development. RT5350F-OlinuXino specifications: SoC – Ralink / Mediatek RT5350F MIPS24KEc CPU @ 360 MHz System Memory – 32MB SDRAM Storage – 8MB SPI NAND Flash 3x headers with access to USB 2.0 HOST/Device 5x 10/100 Mbps Ethernet port GPIOs, SPI, I2C I2S, PCM UART JTAG Power – 3x external DCDC power converters releasing internal RT5350F vreg and preventing common problem with overheating with this chip. Dimensions – N/A Operating Temperature Range – -10 to +55C The board is pre-loaded OpenWRT with Linux 3.18.11. You can find builds instructions and other documentation in the Wiki, as well as […]

May 14, 2015May 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

FireWRT is an OpenWRT 802.11ac Board Powered by Mediatek MT7621A Processor

There are plenty of low cost 802.11n routers or boards supporting OpenWRT, even starting at $10 or less such as A5-V11 mini router, but if you’re looking for something a bit more powerful with 802.11ac connectivity, options are much more limited, especially if you need something at a lower cost. One option is Xiaomi MiWiFi router based on Mediatek MT7620A with 64MB RAM, and T-Firefly team is now working on FireWRT board based on the more powerful MT7621A processor coupled with 512 MB RAM, and 16 MB SPI flash. FireWRT specifications: Wi-Fi SoC – Mediatek MT7621A dual core MIPS 1004Kc processor @ 880MHz System Memory – 512 MB DDR3 (Beta version: 256 MB) Storage – 16 MB SPI flash memory, 2x SATA 3.0 ports, micro SD card slot Wi-Fi 802.11 b/g/n @ 2.4GHz up to 300Mbps 802.11 a/n/ac @ 5 GHz, up to 867Mbps (AC1200 class router) External High-Gain Antennas […]

April 29, 2015September 3, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ventana GW5220 ARM Linux SBC Supports WiFi, Wimax, 3G Cellular Connectivity & PoE

Gateworks recently launched another Freescale i.MX6 board part of theur Ventana family with Ventana GW5220 single board computer with Freescale i.MX6 dual processor, HDMI out, Ethernet, and a PCIe slot that takes modules adding WiFi 802.11 b/g/n/a, 4G Wimax, and 3G (CDMA/GSM) connectivity, as well as other compatible PCIe modules. Gateworks GW5520 board specifications: SoC- Freescale i.MX6 Dual with 2x Cortex A9 core @ 800MHz and Vivante GPU System Memory – 512 MB (default) to 2GB DDR3-800 SDRAM Storage – 256 MB (default) to 2GB Flash, micro SD slot, serial configuration EEPROM Connectivity – 1x Gigabit Ethernet port (RJ45) Video Output and Input – HDMI 1.4 out, CVBS, Y/C, and YPbPr inputs, LVDS output (TIA/EIA 644-A) Audio – HDMI, analog stereo Line In/Out, or Headphone/Mic Expansion – 2x Mini PCIe sockets including one supporting USB and SIM socket, and the other supporting PCIe, mSATA and USB signals. Other I/O ports: […]

April 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Domino Core Wi-Fi Module Powers an Arduino Yun Compatible Board (Crowdfunding)

The makers of GL.iNet OpenWRT compatible router have decided to build a module and two development boards based on Qualcomm Atheros AR9331 WiSoC. Domino.IO is composed of a Domino Core Wi-Fi module that can be used in your own project, but if also part of Domino Pi, a breadboard-friendly board featuring the module, and Domino Qi mini, a similar board with an Atmel ATMEga32U MCU making it compatible with Arduino Yun board. Domino Core specifications: SoC – Qualcomm Atheros AR9331 MIPS processor @ 400MHz with System Memory – 64MB DDR3 Storage – 16MB flash Connectivity – 802.11 b/g/n Wi-Fi with u.FL connector I/Os via half through holes – USB 2.0 host/slave, 3x Ethernet, 29 IOs including UART, SPI, I2S, SLIC, etc… Dimensions – 41 x 25 x 3.8 mm Domino Pi and Qi mini summarized specifications are shown in the table below. Domino Pi Domino Qi Mini Wi-Fi Module Domino […]

April 16, 2015April 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

RaidSonic Releases Firmware and Source Code for Atheros AR9331 Wi-Fi Audio Streamers

RaidSonic is a German company releasing products such as media players and multimedia accessories under their ICY BOX brand. One of those products is ICY Box IB-MP401Air music streaming received based on Atheros AR9331, and that looks very similar to SoundMate M2 I reviewed last year. But if you look on their product page, you’ll find out a few download links: ICY BOX IB-MP401Air (multilang) – The Quick Start Guide and User’s manual in English and German IB-MP401Air (Source code) – a 648 MB rar file with source code for U-boot and OpenWRT IB-MP401Air (Firmware) – The firmware IB-MP401Air (Open Source Software) – Just the open source licenses So I’ve downloaded the source code file (IB-MP401Air_Sources_and%20License_Terms.rar) to have a look. It has two compressed files, one with the license, and IB-MP401Air_Sources.tar.gz with the source code.

tar xzvf IB-MP401Air_Sources.tar.gz
cd dns320B_GPL20150212/
ls -l
total 12
-rwxr--r--  1 jaufranc jaufranc 1400 Apr 16 16:49 building-the-firmware.txt
drwxr-xr-x 14 jaufranc jaufranc 4096 Feb 12 10:54 dns320B_GPL20150212
-rwxr--r--  1 jaufranc jaufranc  925 Feb 12 08:25 making-u-boot.txt

tar xzvf IB-MP401Air_Sources.tar.gz

cd dns320B_GPL20150212/

ls -l

total 12

-rwxr--r-- 1 jaufranc jaufranc 1400 Apr 16 16:49 building-the-firmware.txt

drwxr-xr-x 14 jaufranc jaufranc 4096 Feb 12 10:54 dns320B_GPL20150212

-rwxr--r-- 1 jaufranc jaufranc 925 Feb 12 08:25 making-u-boot.txt

The file showing how to build the firmware (OpenWRT) explains you should not use […]

March 31, 2015March 31, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Onion Omega is an Atheros AR9331 Wi-Fi Module Supporting Various Docks and Add-on Boards (Crowdfunding)

There are so many inexpensive Wi-Fi modules running Linux that it would be easy to discard Onion Omega as yet another Wi-Fi module based on Atheros AR9331 WiSoC. However, the developers have tried to bring some added value by making programming easier for web developers, integrating it with a cloud platform (free for non-commercial use), and providing basicor Arduino dock, and add-on boards for Ethernet, OLED, Relay… to make building hardware projects easier too. Let’s go through the hardware first, starting with the module specifications: SoC – Atheros AR9331 400MHZ MIPS 24K System Memory – 64MB DDR2 400MHz Storage – 16MB Flash Connectivity – 10/100 Mbps Ethernet + 802.11b/g/n Wi-Fi up to 150Mbps with PCB antenna w/ uFL connector I/Os – 18 GPIOs USB – 1x USB 2.0 Power Supply – 3.3V; Typ. consumption: 0.6W Dimensions – 28.2mm x 52mm (1.1″ x 2.0″) Since this type of module is not […]

March 29, 2015March 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

A5-V11 Mini Router Runs OpenWRT (Linux) For Just $8

In case you you still think OpenWRT capable NEXX WT1520 router is still too expensive at $15, what about an $8 OpenWRT router? That’s what LY mini wireless router costs including shipping, and it’s better known as A5-V11, the name of its PCB. It’s not exactly a 3G/4G router as the casing implied, but it does support external USB 3G/4G dongles like most other routers with USB on the market. A5-V11 specifications: SoC – Mediatek/Ralink) RT5350F MIPS processor @ 360MHz System Memory – 32MB RAM (W9825G6EH-75). Some people reported theirs only have 16MB RAM, so YMMV. Storage – 4MB NAND flash (Pm25LQ032) Connectivity – Wi-Fi 802.11b/g/n up to 150 Mbps; 1x 10/100M Ethernet USB – 1x USB 2.0 host port, 1x micro USB port for power Misc – Power LED, factory reset pinhole Power – 5V via micro USB port Dimensions – 6.1 x 2.3 x 1.4 cm Contrary to […]