Linux Category - Page 64 of 588 - CNX Software

October 31, 2023October 31, 2023 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Qualcomm Snapdragon X Elite SoC benchmarks in Windows and Linux

Snapdragon X Elite reference laptop 23W vs 80W

Qualcomm unveiled the 4.3 GHz 12-core Snapdragon X Elite processor for laptops last week since some bold claims about the performance and efficiency. The company has now released benchmarks for the processor verified by third parties such as Anandtech and Notebookcheck showing the new Snapdragon processor performance is quite amazing with the Arm processor indeed matching Apple, Intel, and AMD high-end chips. What’s more is that the new SoC was tested in both Windows and Linux (using Geekbench 6.2), so in hindsight, I was wrong to say the Snapdragon X Lite would be a Windows-only processor when only seeing the DX12 listed in the specifications… Before we look into the benchmark results, we should note that Qualcomm provided two versions of the Snapdragon X Elite laptop prototype both using active cooling: “demo config A” high-performance system configured to run at an 80W TDP, and a low-power, thinner “demo config B” […]

October 31, 2023November 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Raspberry Pi 5 Kit Review – Part 1: Unboxing, Assembly and First Boot

Raspberry Pi 5 Kit Review Raspberry Pi OS boot

I’m quite late on that one, but after an extended holiday, I’m now ready to review the Raspberry Pi 5 the company sent me last month. I’ll do so with the latest Raspberry Pi OS Bookworm based on Debian 12 and CNX Software’s “tropical reviews” are usually more demanding than most others due to the higher ambient temperature (usually around 28°C in my room) in Thailand. But since Raspberry Pi did not just send the Raspberry Pi 5, but a full kit with keyboard, mouse, enclosure, and more, I’ll start with a post mostly looking at the hardware with an unboxing, assembly, plus a quick try at Debian 12 on the new SBC. Raspberry Pi 5 Kit Unboxing Besides the Raspberry Pi 5 itself, the package included the active cooler (heatsink + fan), a microSD card preloaded with a pre-release Raspberry Pi OS Bookworm image, a USB-PD power supply, a […]

October 30, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MediaTek Genio 1200 Arm Cortex-A78/A55 EVK gets official Ubuntu 22.04 support

Canonical and MediaTek announced optimized Ubuntu images for the Genio 1200 EVK during Embedded Word 2023 last March, but at the time, I could not find any images for download, and there was just an invitation to come check out Ubuntu Core running on the MediaTek Genio platform at the event. But things have progressed well, and Canonical has now announced the availability of Ubuntu 22.04 Desktop and Server for not only the high-end Genio 1200 EVK, but also the mid-range Genio 700 EVK, and the entry-level Genio 350 EVK. That should be good news, as when I tested the i-Pi SMARC 1200 devkit earlier this year (June 2023), the Genio 1200 Arm Cortex-A78/A55 processor (aka MediaTek MT8195) showed really good performance in benchmarks, but at the time, the only option was to use a Yocto image, which is great, but there were still some unresolved software issues and the […]

October 30, 2023January 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 6.6 LTS release – Highlights, Arm, RISC-V and MIPS architectures

The Linux 6.6 release has just been announced by Linus Torvalds on the Linux Kernel Mailing List (LKML): So this last week has been pretty calm, and I have absolutely no excuses to delay the v6.6 release any more, so here it is. There’s a random smattering of fixes all over, and apart from some bigger fixes to the r8152 driver, it’s all fairly small. Below is the shortlog for last week for anybody who really wants to get a flavor of the details. It’s short enough to scroll through. This obviously means that the merge window for 6.7 opens tomorrow, and I appreciate how many early pull requests I have lined up, with 40+ ready to go. That will make it a bit easier for me to deal with it, since I’ll be on the road for the first week of the merge window. Linus About two months ago, […]

October 28, 2023October 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qualcomm Snapdragon 8 Gen 3 gains upstream Linux support

Qualcomm Snapdragon 8 Gen3 Android 14 upstream Linux

Linaro has announced upstream Linux support for the newly released Snapdragon 8 Gen 3 mobile platform also codenamed SM8650. The patchsets enable Android 14 AOSP to boot with mainline Linux on Snapdragon 8 Gen 3 hardware using Google SwiftShader CPU-based implementation of the Vulkan graphics API. While there is a lot of buzz around the announcement of the Snapdragon X Elite 12-core Arm processor for laptops in recent days, Qualcomm also introduced its latest premium processor with the Snapdragon 8 Gen 3 Mobile Platform for mobile phones featuring a 3.3 GHz Cortex-X4 core, five Cortex A720 Performance cores, and two Cortex A520 efficiency cores, as well as support for generative AI through AI accelerators. The announcement was made on October 25, and Linaro released the patchsets to the Linux Kernel Mailing List (LKML) on the same day. Android devices are often stuck to an older Linux kernel for their entire […]

October 27, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

COM Express development kit ships with Intel Core i3-13300HE or Core i5-13600HE Raptor Lake-P processor

ADLINK has launched an “IoT prototyping kit” based on the company’s Express-RLP COM Express Type 6 module with either an Intel Core i3-13300HE or Core i5-13600HE Raptor Lake-P processor. The module supports up to 64GB DDR5 and the ATX carrier board offers a wide range of interfaces such as 2.5GbE, two SATA ports, DisplayPort, LVDS (or EDP), and VGA video outputs, two USB4 ports, and more. COM Express Type 6 Raptor Lake-P devkit specifications: System-on-Module – ADLINK Express-RLP COM Express Type 6 computer-on-module Raptor Lake-P SoC Intel Core i5-13600HE 4P+8E cores/16 threads processor @ up to 2.7 GHz with 18MB cache, Intel Iris Xe graphics; TDP: 45W (cTDP: 35W) Intel Core i3-13300HE 4P+4E cores/12 threads processor @ up to 2.1 GHz with 12MB cache, Intel UHD graphics; TDP: 45W (cTDP: 35W) System Memory – Up to 64GB (2x 32GB) DDR5 via SO-DIMM sockets Dimensions – 125 x 95 mm (PICMG […]

October 27, 2023March 26, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Raspberry Pi CM4-based industrial panel PC adds 4G LTE, RS232 and RS485, M.2 NVMe SSD

EDATEC ED-HMI2120-101C is a Raspberry Pi CM4-based industrial panel PC with a 10.1-inch capacitive touchscreen display with plenty of interfaces to cater to a wide range of use cases from robotics to energy management and industrial automation. The panel PC builds upon the ED-HMI2020-101C introduced just a few months ago, but adds a range of features with dual Ethernet, RS485 and RS232 interfaces, and optional supports for an M.2 NVMe SSD and 4G LTE cellular connectivity. The device now supports an even wider DC input range from 9V to 36V and provides three 12V DC outputs to power external hardware such as an additional LCD. ED-HMI2120-101C specifications (with highlights in bold and strikethrough showing the differences against the earlier ED-HMI2020-101C model): System-on-Module (SoM) – Raspberry Pi CM4 SoC – Broadcom BCM2711 CPU – Quad-core Cortex-A72 processor @ 1.5GHz GPU – VideoCore VI conformant with OpenGL ES 3.1 & Vulkan 1.2 […]

October 26, 2023October 25, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Portenta Hat Carrier board adds Raspberry Pi HAT support to the Portenta X8 SBC

The Arduino Portenta Hat Carrier board aims to interface the Linux-capable Portenta X8 board with the vast ecosystem of Raspberry Pi HAT (Hardware on Top) expansion boards. Introduced last year, the Arduino Portenta X8 is the first Arduino Pro hardware that can run Linux thanks to its NXP i.MX 8M Mini Arm Cortex-A53 quad-core processor. But it comes in a tiny 66.04 x 25.4 mm form factor which may be great for integration into products, but for prototyping or design of products such as IoT gateways, the company has now launched the Portenta Hat Carrier that enables the board to easily connect with the Raspberry Pi HATs available today. Portenta Hat Carrier specifications: Compatible with the Portenta X8 board and future Portenta with the same high-density connectors Storage – MicroSD card slot Camera I/F – MIPI CSI camera connector (CNXSoft: Arduino does not explicitly say whether it’s compatible with the […]