Linux Category - Page 477 of 580 - CNX Software

November 30, 2013 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

XBMC MX Linux v1.00 RC1 for AMLogic AML8726-MX Devices

Developer “croniccorey” has recently announced the release of MX Linux v1.00 RC1, an XBMC Linux image for media players based on AMLogic AML8726-MX, on XDA Developers’ Forums. This release supports G18REF and MX2REF devices (See build.prop in Android) such as Matricom G-Box Midnight MX2, and a test image has also been released for g02refDongle devices such as Droid Stick A2. Checking the MTD layout Before starting the installation, you may want to check your flash partitions in order to avoid bricking your device: Install and run Terminal Emulator Run the command below to make sure your partition table is compatible with the image:

[root@amlogic /]# cat /proc/mtd
 dev:    size   erasesize  name
 mtd0: 00400000 00200000 "ubootenv" or "bootloader"
 mtd1: 00800000 00200000 "logo"
 mtd2: 00800000 00200000 "aml_logo"
 mtd3: 00800000 00200000 "recovery"
 mtd4: 00800000 00200000 "boot"
 mtd5: 40400000 00200000 "system"
 mtd6: 20000000 00200000 "cache"
 mtd7: 10000000 00200000 "backup"
 mtd8: 18c800000 00200000 "userdata"

[root@amlogic /]# cat /proc/mtd

dev: size erasesize name

mtd0: 00400000 00200000 "ubootenv" or "bootloader"

mtd1: 00800000 00200000 "logo"

mtd2: 00800000 00200000 "aml_logo"

mtd3: 00800000 00200000 "recovery"

mtd4: 00800000 00200000 "boot"

mtd5: 40400000 00200000 "system"

mtd6: 20000000 00200000 "cache"

mtd7: 10000000 00200000 "backup"

mtd8: 18c800000 00200000 "userdata"

If your partition table is different, do not install the default image for MX2REF / G18REF. However, If you’ve got Matricom Android firmware version 1.1.6 or greater or WJB’s Linux builds from November 21 2013 onwards, the MTD layout will be different, and you’ll need to […]

November 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux.Darlloz Worm Targets Embedded Linux Devices

Symantec has recently discovered a new Linux worm, called Linux.Darlloz, that targets Internet-enabled devices running Linux in addition to traditional computers. That means devices such as home routers, set-top boxes and security cameras could be at risk of infection, although no attacks against non-PC devices have been confirmed yet. The worm exploits an “old” PHP vulnerability, which was patched in May 2012 (PHP 5.4.3, and PHP 5.3.13), and currently only affects Intel (x86) based systems. So you’d need an embedded system powered by an Intel processor, running Linux and PHP to be at risk. Having said that, Symantec also explains code for other architectures such as ARM, PPC, and MIPS, is also present in the worm, and these systems could potentially be at risk too with small modifications. Here’s how the worm operates: Upon execution, the worm generates IP addresses randomly, accesses a specific path on the machine with well-known […]

November 29, 2013November 29, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 13.11 Release with Linux Kernel 3.12 and Android 4.4

This release includes Linux Kernel 3.12 (baseline), Linux Kernel 3.10.20 (LSK), Android 4.4 for the first time, and Ubuntu Linaro 13.11 (still based on Raring). Beside Android Kit Kat support, other noticeable updates include initial documentation for LAVA, and further work on ARMv8 support. Here are the highlights of this release: Android Engineering Android 64-/32-bit updated to 4.4 KitKat Fastboot/UEFI – Created Fastboot app design Builds and Baselines Linaro Stable Kernel 3.10.20-2013.11 released – Includes an updated big.LITTLE MP patchset Linux Linaro 3.12-2013.11 released: gator version 5.16 (same version as in 13.10 release) updated big-LITTLE-pmu, iks, iks-cpufreq, and interactive-gov-updates topics from ARM LT updated basic Capri board support from Broadcom LT (generic phy support for USB, watchdog, updated bcm_defconfig) updated big endian topic updated topic to support K3V2 board from Hisilicon LT updated Versatile Express patches from ARM LT vexpress64 support (updated FVP Base model files, added support for FVP […]

November 28, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Avalue ECM-KA SBC Powered by AMD Embedded G-Series Dual and Quad Core SoCs

Avalue Technology, a Taiwanese company manufacturing industrial and embedded single board computer, has recently announced a 3.5” SBC (single board computer) micro module, labeled ECM-KA, powered by AMD Embedded G-Series SoCs. The board will feature GX-415GA Quad-core SoC by default, with GX-217GA (1.6GHz), and GX-210HA (1.0GHz) dual core SoCs as options. The board targets the embedded market with applications such as industrial controls & automation, gaming (e.g. slot machine, aracade), thin clients, retail/ digital signage, SMB storage server, surveillance, medical, communication, entertainment, and data acquisition. ECM-KA Specifications: SoC – AMD Embedded G-Series Quad-core GX-415GA @ 1.5GHz SoC with on-chip Radeon HD 8400E GPU (Optional GX-217GA 1.6GHz/ GX-210HA 1.0GHz) System Memory – One 204-pin DDR3 SODIMM Socket Supports Up to 8GB DDR3 1600 SDRAM Storage – 2x SATA III and SSD One CompactFlash Type I/II Socket (Support InnoDisk CF-SATA). Expansion – 1x Mini PCIe (mSATA Supported) I/O MIO – 1 x […]

November 27, 2013November 27, 2013 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

$39 86Duino ZERO is an x86 Arduino Compatible Board that Supports DOS, Windows, and Linux

Intel Gallileo Development Board with a Intel Quark processor, and Arduino software and hardware, now gets some competition with DM&P Electronics’ 86Duino ZERO board powered by the company’s Vortex86EX processor and 128MB RAM, that is said to support DOS, Windows, and Linux. 86Duino ZERO Specifications: Processor – DM&P Vortex86EX 32-bit x86 processor @ 300MHz System Memory – 128MB DDR3 Storage – 8MB SPI flash, and microSD card slot Connectivity – 10/100M Ethernet (at the back of the board, not RJ45) USB – USB host connector, micro USB port for development Arduino Leonardo compatible headers Misc – Reset button, PCIE bus Power Supply – DC-IN 7 to 12V, or via microUSB port. The board is comprised of a daughter board (DM-222) and a System-on-Module (SoM) either called DM-205 and or Vortex86EX SOM-128-EX which the following specs (some of which are not accessible in 86Duino Zero): Processor – Vortex86EX @ 300MHz System […]

November 26, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Merrii Hummingbird Development Kit Features AllWinner A20 Processor, and an Optional 7″ Touchscreen Display

And yet another AllWinner A20 development platform shows up in my news stream in about 24 hours. Merrii Technology, a Shenzhen based electronics design house, has showed off their Hummingbird Development Kit to ARMDevices.net. The development board comes with 1GB RAM, 4GB NAND Flash, Gigabit Ethernet, SATA, HDMI output, and more. There’s also an optional 7″ capacitive touch screen display for the board. The company explains the kit can be used to develop application such as media players, game consoles, IPTV, automotive products (GPS & IVI), robots, servers, surveillance products, and home automation systems. Here are the board specifications: SoC – AllWinner A20 dual ARM Cortex-A7 core @ 1 GHz with ARM Mali400-MP2 GPU System Memory – 1GB DDR3 (2x 4Gb 16bits DDR3) Storage – 4GB MLC 64bit ECC NAND Flash (Hynix H27UBG8T2A), SATA II connectors, and micro SD card slot (Up to 32GB) Connectivity – Wifi & Bluetooth (two-in-one […]

November 26, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Improv Open Hardware Platform Features EOMA68-A20 CPU Card Powered by AllWinner A20 SoC

After seeing a countdown clock on makeplaylive.com a few days ago, I was expecting the Plasma Active, Linux based Vivaldi Tablet to come up, but instead Improv, an open hardware platform, has just been launched. It features the long awaited EOMA68 CPU card with AllWinner A20 dual core ARM Cortex A7 processor, together with a “feature board”, and is now available for pre-order for $75, with shipping expecting in January. It’s only available in North America and Europe for now. Improv specifications: EOMA68-A20 CPU board: SoC – AllWinner A20 dual core ARM Cortex-A7 @ 1 GHz with Mali-400MP2 GPU System Memory – 1GB DDR2 Storage – 4GB NAND flash Video – micro HDMI (video + audio), RGB/TTL pins USB – Micro USB OTG + USB 2.0 host pins Networking – 10/100M Ethernet Other buses – I2C, 8 GPIO, UART0 Weight – Under 40 grams Feature board: Storage – 32K EEPROM, […]

November 25, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

$69 PhoenixA20 Pico-ITX Board Features Allwinner A20 SoC

Anichips Technology, a Shenzhen based electronics design company, has just announced PhoenixA20, a pico-ITX board features AllWinner A20 dual core Cortex A20 SoC with 1GB, 4GB Flash, HDMI and VGA output, Ethernet, and built-in Wi-fi and Bluetooth. PhoenixA20 specifications: SoC- AllWinner A20 dual ARM Cortex-A7 processor @ 1.2 GHz with ARM Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 4GB NAND Flash, micro SD card slot (up to 32GB), and SATA Video output – HDMI and VGA connectors. LVDS, RGB and CVBS signals are accessible via the expansion headers Connectivity – 10/100M Ethernet, Wi-Fi & Bluetooth 4.0 (via AP6210) USB – 2x USB 2.0 host ports Camera Interface – CSI Expansion headers – 3x UART, 2x I2C, 1×I2S, 1xCVBS, 4x TVIN, 2x Line IN, 1x SPDIF, 2x PWM, 2x LRADC, 2x FMIN, 1xHeadphone, 4xTVOUT, MIC, IR, TP The board supports Android 4.2.2, and Linux 3.3 with source code for […]