Linux Category - Page 262 of 574 - CNX Software

June 14, 2018June 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Hikey 970 Documentation, HiAI DDK, Linux Firmware Images, and Support Forums

Hikey 970 board has impressive specifications with Huawei Kirin 970 SoC featuring an octa-core Arm Cortex A73/A53 processor and an Arm Mali-G72-MP12 GPU, coupled with 6GB LPDDR4x and 64GB UFS storage. It’s also one of the first broadly available developer platforms equipped with a Neural Processing Unit for artificial intelligence applications. However when it launched in April, Hikey 970 documentation was lacking, and despite the board is supposed to run both Android (AOSP) and Linux distributions such as Ubuntu or Debian, so far only AOSP is shown in the download section, with Linux distributions “coming soon”. But if you want to start as soon as possible there are still some good news. First, some documentation for the board has been released on Github, including getting started guides, hardware documentation (schematics, user manual, etc..), and some instructions to build AOSP from source code, and flash it to the UFS storage. If […]

June 11, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

e-con Systems Introduces a 4K Multi-Camera System for NVIDIA Jetson TX1/TX2 Boards

Last year, e-con Systems launched a 360° Camera Kit for NVIDIA Jetson TX1/TX2 boards that featured 6 cameras capable of recording or streaming 1080p30 each in real-time. The company is now back with a multi-camera system with “only” three cameras, but each can handle uncompressed video up to 4K UHD resolution at 30 fps. Meet e-CAM130_TRICUTX2 kit. Specification for the 4K Multi-camera system: Camera Modules – 3x e-CAM137_CUMI1335_MOD 13.0 MP Camera Module with S-mount lens holder Resolutions & frame rates (YUV422) VGA up to 30 fps (sync), up to 100 fps (async) HD (720p) up to 30 fps (sync), up to 72 fps (async) Full HD (1080p) up to 30 fps (sync), up to 72 fps (async) 4K up to 30 fps 13MP (4192 x 3120) up to 19 fps (async mode only) Baseboard with: 4-lane MIPI CSI-2 interface to connect with the CPU On board PWM generator circuit and external […]

June 11, 2018June 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Zidoo X20 High-End 4K Media Player Launched for $486 and Up

Unveiled last January, Zidoo X20 Pro is a high-end Android + Linux (OpenWrt) media player powered by Realtek RTD1296 media processor, and equipped with three HDMI ports, two SATA bays, ES9038 professional DAC, and more. The only thing is that it was not available just yet, but Zidoo X20 Pro, or more exactly its little brother Zidoo X20, has now started to show up on Aliexpress and Futeko for $486 and up. Zidoo X20 specifications: SoC – Realtek RTD1296 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2 GB DDR4 Storage – 16 GB eMMC flash, 2x SATA 3.0 bays for 2.5 or 3.5″ drives Video 1x HDMI 2.0a output up to 4K @ 60 Hz 1x HDMI 1.4 output up to 4K @ 30 Hz 1x HDMI 2.0 input supporting PiP, stream recording, and UDP broadcasting 1x RCA composite output Decode – HDR10, 10-bit […]

June 10, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

IC Nexus SBC3100 Rockchip RK3399 SBC Supports Variable DC Input (9 to 36V)

Earlier this year, we got flooded with announcements for new Rockchip RK3399 SBC’s or development boards with products like RockPro64 or Orange Pi RK3399. Here’s another one launched last year by Taiwan based IC Nexus, which showcased their SBC3100 board at Computex 2018 this past week. IC Nexus SBC3100 SBC specifications: SoC – Rockchip RK3399 hexa core big.LITTLE processor with two Arm Cortex-A72 cores up to 2.0GHz, four Cortex-A53 cores up to 1.5GHz, and a Mali-T864 GPU with OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC System Memory – 1 GB, 2GB or 4GB RAM Storage – 8 or 16GB eMMC flash, 1x microSD slot Display Interfaces / Video Output HDMI 2.0 up to 4K @ 60Hz DisplayPort 1.2 up to 4K @ 60 Hz via USB Type-C connector 1x eDP 1.3 up to 2560 x 1600 @ 60 Hz MIPI-DSI up to 2560 x 1600 @ 60 Hz I2C capacitive […]

June 8, 2018June 8, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

FriendlyElec Launches Smart6818 Samsung S5P6818 CPU Module

Yesterday, we covered Core4418 low profile board based on Samsung S5P4418 quad core Cortex A9 processor, but that’s not the only product launched by FriendlyElec this week, as the company also introduced Smart6818, a Samsung S5P6818 CPU module following Smart4418 module design, and equipped with 1GB DDR3, and 8 to 32 GB eMMC flash. Smart6818 specifications: SoC – Samsung S5P6818 octa core Cortex A53 processor @ up to 1.4GHz, Arm Mali-400MP GPU System Memory – 1GB DDR3 up to 800 MHz Storage – 8GB eMMC flash (16GB and 32GB optional) Connectivity – Realtek RTL8211E Gigabit Ethernet transceiver Audio – ES8316 Audio codec Board to Board Headers 2x 70-pin 2.0mm pitch headers with RGB LCD, LVDS, HDMI Tx, I2C, PWM, USB host, UART, SPI, GPIOs, SDIO, Gigabit Ethernet, Audio input/output, Camera I/F 1x 34-pin 2.0mm pitch unpopulated header with GPIOs, MIPI CSI, ADC, PWM Power Supply – 5V Power Management – […]

June 7, 2018June 7, 2018 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

FriendlyELEC Core4418 is a Low Profile Samsung S5P4418 Board

Samsung (Nexell) S5P4418 & S5P6818 quad/octa core Cortex A9 processors used to have dismal Linux support with a very old & unsecure Linux 3.4 kernel, but in the last year or so software support has greatly improved, likely because those processors are used in some Samsung Artik IoT modules. FriendlyELEC has been manufacturing several S5P boards starting from their NanoPi2 board launched in 2015, and more recently they introduced NanoPi Fire2A & Fire3 boards based on S5P4418 & S5P6818 processor respectively. But this month, they’ve launched two more S5P platforms, and today I’ll look at Core4418 board, which has a lower profile than any of their previous board since the RJ45 Ethernet jack and USB type A ports are not included. FriendlyELEC Core4418 specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz, Arm Mali-400MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash, […]

June 6, 2018June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linux 4.17 Release – Main Changes, Arm & MIPS Architectures

Linus Torvalds released Linux 4.17 last Sunday: So this last week was pretty calm, even if the pattern of most of the stuff coming in on a Friday made it feel less so as the weekend approached. And while I would have liked even less changes, I really didn’t get the feeling that another week would help the release in any way, so here we are, with 4.17 released. No, I didn’t call it 5.0, even though all the git object count numerology was in place for that. It will happen in the not _too_distant future, and I’m told all the release scripts on kernel.org are ready for it, but I didn’t feel there was any real reason for it. I suspect that around 4.20 – which is I run out of fingers and toes to keep track of minor releases, and thus start getting mightily confused – I’ll switch […]

June 5, 2018June 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

RAK831 Lite is a $200 LoRa / LoRaWAN Gateway based on Raspberry Pi 3 Board

RAK831 is a Semtech SX1301 based LoRa gateway module that was released by RakWireless in 2017. The board has since then be sold as part of the company’s LoRa gateway developer kit with a Raspberry Pi and a MAX-7Q GPS Module. But now RakWireless offers a nicely packaged solution with Raspberry Pi 3 board, RAK831 module, a GPS board, an enclosure, antenna, and power supply which they call RAK831 Lite, and sells for just $199 + shipping ($6.45 extra here).RAK831 Lite gateway main components and specifications: Main board – Raspberry Pi 3 development board with Broadom BCM2837 processor, 1GB RAM, micro SD card slot, Fast Ethernet, 4x USB ports, HDMI output, audio jack Connectivity RAK831 LoRa Concentrator board based on SX1301 chipset RF frequencies – 433, 470, EU868, AS923, AU915, and US 915 Rx Sensitivity – -140 dBm Tx Power – Up to 25.5 dBm at settings 27 dBm SMA […]