Linux Category - Page 247 of 574 - CNX Software

December 28, 2018March 4, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ClockworkPi GameShell Review – Part 1: Unboxing & Assembly Guide

ClockworkPi Gameshell is a portable retro gaming console kit designed to be hackable being powered by Allwinner R16 processor to run Linux, as well as an Arduino compatible Atmel AVR MCU. It’s partially open source hardware with PDF schematics, and firmware source code available on Github. The device launched last year on Kickstarter, raised close to $300,000, and started shipping to backers last summer. The company has now sent me a sample for review, so let’s have a look. The first part of the review will be more than just an unboxing, since the game console is meant to be assembled by the end user, and I’ll report my experience doing so. ClockworkPi Gameshell Unboxing The kit comes in a fairly large package that reads “GameShell – Redefine Portable Game Console” and lists the main specifications with quad core Cortex A7 processor, WiFi and Bluetooth connectivity, 1GB RAM, 16GB micro […]

December 27, 2018December 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

NXP i.MX 6ULZ Cost Efficient Processor Drops Ethernet, Display, & Camera Interfaces

Freescale i.MX 6 processor was first announced in January 2011, and in the first few years I covered many products and development boards based on the single to quad core Cortex A9 processor. Further down the road, the company became part of NXP, and launched Cortex A7 variant such as i.MX 6ULL providing both lower costs and power consumption. But now, I usually skip new products based on i.MX6 because they are often just more of the same, and not really new worthy. But yesterday while writing about Linux 4.20 release, I realized I missed the announcement of i.MX 6ULZ processor similar to i.MX 6UL (UltraLight), but cost optimized for applications that do not require Ethernet, display, nor camera interfaces. NXP i.MX 6ULZ key features and specifications with differences with i.MX 6UL highlighted in bold or stricken-through: CPU – ARM Cortex A7 core @ up to 900 MHz with 128KB […]

December 26, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.20 Release – Main Changes, Arm and MIPS Architectures

After Greg K-H handling Linux 4.19 release, Linus Torvalds is back at the helm, and released Linux 4.20 just before Christmas: Let’s face it, last week wasn’t quite as quiet as I would have hoped for, but there really doesn’t seem to be any point to delay 4.20 because everybody is already taking a break. And it’s not like there are any known issues, it’s just that the shortlog below is a bit longer than I would have wished for. Nothing screams “oh, that’s scary”, though. And as part of the “everybody is already taking a break”, I can happily report that I already have quite a few early pull requests in my inbox. I encouraged people to get it over and done with, so that people can just relax over the year-end holidays. In fact, I probably won’t start pulling for a couple of days, but otherwise let’s just […]

December 26, 2018December 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Banana Pi to Launch a 24-Core Arm Server

SinoVoIP has been offering Banana Pi single board computers for several years. Their boards are generally based on Arm processors, offered at a relatively decent price, although not as quite as good value as FriendlyELEC and Orange Pi ones. The company is also known for providing subpar documentation and firmware images, but a fairly active community still formed around their boards 🙂 The company has now demonstrated something a little different with a 24-core Arm server that should eventually be sold as a Banana Pi server board or actual server, as the full details are yet to be known. We did not get a glimpse at the actual hardware, but the blurry photo above gives some clues. We have 24-core Arm Cortex A53 processor with 32GB RAM (29.4GB seen by the OS) running Ubuntu 18.04.1 LTS with MATE desktop. There aren’t that many 24-core Arm Cortex A53 processors, so unless […]

December 24, 2018January 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Khadas Captain / Edge SBC Review – Part 2: Ubuntu 18.04

I received Khadas Edge Developer Package with Khadas Edge RK3399 module, Khadas Captain carrier board, and several accessories a few weeks ago, and after checking the hardware in the first part of the review, I’ve now taken the time to review software support, specially Ubuntu 18.04 on the board. Khadas Edge / Captain Firmware There are currently four main choices of firmware for Khadas Edge / Khadas Captain: Ubuntu 18.04 OS with LXDE desktop environment @ https://dl.khadas.com/Firmware/Edge/Ubuntu/ Android ROM @ https://dl.khadas.com/Firmware/Edge/Android/ with Android Nougat being a proper release, Android Oreo (available now) a temporary version that will not be supported, and Android P that will be released and supported by Rockchip later on in 2019 Armbian RK3399 for Khadas Edge looks to be work-in-progress right now LibreELEC for playing videos on the platform I decided to focus on Ubuntu 18.04 for this review, and Karl who has his own sample […]

December 24, 2018December 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

$100 Laptop Shell to Support Smartphones, USB Type-C PC Sticks, and SBCs (Crowdfunding)

Launched in 2011, Motorola Lapdock turned the company’s Atrix 4G smartphone into an Android laptop, but it did not end up being a commercial success so the company stopped manufacturing the laptop shell a few years ago. It is still used by hobbyist for example to create their own DIY Raspberry Pi laptop, and in recent years, with phoned getting much more powerful and desktop support for Android improving, lookalikes have been launched such as NextDock or Mirabook. A new option will soon be available, as Charbax known for his armdevices.net website and YouTube channel has just launched an Indiegogo campaign for a $100 Lapdock. Two models will be available with Lapdock 11.6″, and Lapdock 14.1″ referring to their size, but sadly no other specifications were provided for the display. We still know they’ll work with Samsung Dex / Linux on Dex modes, Huawei PC mode, and basically any device […]

December 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

$6 C-SKY Linux Board Reviewed, Benchmarked

The price of single board computers and development boards has really gone down in recent years, and it’s easy to find a low cost Arm based board for most project. But C-SKY Linux development board is quite different since it’s based on the little known C-SKY architecture, and the price in China ($6) is really competitive for a media capable board. If you live outside of China, the board is now sold for about $18 including shipping, and MickMake decided to buy one to have a closer look and review the board. As we covered during the announced the board is powered by NationalChip GX66058 C-SKY 32-bit processor clocked at up to 574 MHz and integrating 64MB DDR2 on-chip. Getting the board on-hand allowed Mick to get more details about the other chips included in the board namely: STMicro STM32F103 to handle all the JTAG control through a micro USB […]

December 22, 2018April 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 32 Comments

ATOMIC Pi Intel Atom x5 Board Goes for $34 and Up (Crowdfunding)

Following Raspberry Pi form factor, AAEON Up Board powered by an Intel Atom x5-Z8300 processor launched in 2015 for 89 Euros and up via a crowdfunding campaign. Since then, the company switched to Atom x5-Z8350, and now offers for the board for $99 US and up, with for example the 2GB RAM / 16GB flash version going for $109 excluding taxes and shipping. I’m mentioning this board, as there’s now a crowdfunding campaign for a larger board with similar specifications (x5-Z8350, 2GB RAM, 16GB flash) called ATOMIC Pi, and being offered for just $34 plus shipping by “Team IoT”. This looks too good to be true, but that’s intriguing so let’s have closer look. ATOMIC Pi specifications: SoC – Intel Atom x5-Z8350 quad core processor @ up to 1.92GHz with Intel HD graphics System Memory – 2GB DDR3L-1600 Storage – 16GB eMMC flash, slot for SD expansion up to 256GB […]