Linux Category - Page 213 of 603 - CNX Software

September 22, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

TechNexion Unveils EDM and AXON SoM’s Powered by NXP i.MX8M Plus SoC

A few days ago we wrote about Variscite’s NXP i.MX 8M Plus-powered AI systems-on-modules and devkits, and now it’s TechNexion’s turn to introduce its own SoM’s for artificial intelligence applications. Just like variscite, the company has two variants with EDM-G-IMX8M-PLUS following the EDM standard with a 260-pin edge connector, and AXON-E-IMX8M-PLUS part of the AXON family with board-to-board connectors better suited to vibration-prone applications. Besides the form factor and different default storage capacities, both SoM’s share the same specifications: SoC – NXP i.MX8M Plus quad-core Cortex-A53 processor @ up to 1.8 GHz with Cortex-M7 real-time core @ 400 MHz, Vivante GC520L 2D GPU, Vivante GC7000UL 3D GPU, 1080p60 hardware decoder (HEVC, H.264, VP9, and VP8) and encode (H.265/H.264), and 2.3 TOPS NPU System Memory – Up to 8 GB LPDDR4 Storage AXON-E-IMX8M-PLUS – 32 GB eMMC flash by default EDM-G-IMX8M-PLUS – 16 GB eMMC flash by default Networking Chips Qualcomm […]

September 21, 2020February 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

WPQ873 Wireless Embedded SBC is Powered by Qualcomm IPQ8072A WiFi 6 SoC, Supports 5G Modules

wpq873 qualcomm ipq8072A WiFi 6 & 5G SBC

We very recently wrote about DR6018 V2 Embedded WiFi 6 router board powered by Qualcomm IPQ6010 quad-core Cortex-A53 processor @ 1.8 GHz and supporting optional WiFi 6E and 5G IoT M.2 cards. If you are after a solution that supports WiFi 6 (802.11ax) and 5G, but with a bit more processing power and faster WiFi 6 speeds, Compex WPQ873 wireless embedded SBC may be an interesting option thanks to Qualcomm IPQ8072A quad-core Cortex-A53 processor clocked at up to 2.2 GHz, with integrated support for WiFi 6 up to 2475Mbps, and an M.2 socket for an optional 5G card. Compex WPQ873 specifications: SoC – Qualcomm Atheros IPQ8072A quad-core ARM 64 bit A53 @2.2GHz part of Qualcomm Networking Pro 600 Platform System Memory – 1x 512MB, DDR4 16-bit interface Storage – 256MB NAND flash, 8MB NOR flash Networking and Wireless Connectivity Ethernet 3x Gigabit Ethernet (RJ45) ports 1x 2.5 Gbps Ethernet port […]

September 21, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Geniatech XPI 3128 RK3128 SBC is Equipped with an NXP WIFi 5 Module

Geniatech XPI family of single board computers was first introduced in 2018 with the launch of the XPI-S905X development board following many of Raspberry Pi 3 Model B features and form factor. The company has now added another board to the family with XPI 3128 single board computer powered by a Rockchip RK3128 quad-core Cortex-A7 processor coupled with up to 2 GB RAM and 64 GB flash, as well as an NXP WiFi 5 and Bluetooth 4.2 module. Geniatech XPI 3128 specifications: SoC – Rockchip RK3128 quad-core Cortex-A7 processor @ up to 1.2GHz GPU with Arm Mali 400 MP2 GPU (See datasheet) System Memory – 512MB DDR3L (1GB, 2GB optional） Storage – 8GB flash (16GB, 32GB, 64GB optional), and MicroSD card slot Video Output – HDMI up to 1080p60 Video – 1080p60 H.264/H.265 video decoding Connectivity 10/100M Ethernet port Dual-band 802.11b/g/n/ac WiFi 5 and Bluetooth 4.2 via Marvell/NXP 88W8897 module, […]

September 20, 2020September 20, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Raspberry Pi inspired MaaxBoard Mini SBC features NXP i.MX 8M Mini SoC

Last year, Embest – an Avnet company – introduced MaaXBoard NXP i.MX 8M SBC mostly compatible with Raspberry Pi form factor and running Android 9.0 or Yocto Linux. The company has now launched MaaXBoard Mini with a 14nm NXP i.MX 8M Mini quad-core processor. In some ways, the new board follows more closely Raspberry Pi 3 Model B form factor with four USB 2.0 ports, instead of the two USB 3.0 ports found in the first version of the board, but it does so without HDMI output, leaving MIPI DSI as the only option for display output. MaaxBoard Mini (AES-MC-SBC-IMX8MINI-G) specifications: SoC – NXP i.MX 8M Mini Quad with 4x Arm Cortex-A53 cores @ up to 1.8GHz, Cortex-M4F real-time core @ 400MHz, Vivante GCNanoUltra 3D GPU and GC320 2D graphics, 1080p H.264/H.265 VPU; System Memory – 2GB DDR4 Storage – eMMC socket for up to 64GB flash, MicroSD slot Display […]

September 19, 2020 by Ayo Ayibiowu - No Comments

MYIR launches FZ5 EdgeBoard AI Box for AI on the Edge

Back in July of this year (2020), MYRI technology announced the MYIR’s FZ3 deep learning accelerator card powered by the Xilinx Zynq UltraScale+ ZU3EG Arm FPGA MPSoC and it is capable of delivering up to 1.2TOPS computing power. With only a few months since that launch, MYRI technology is now announcing another two related sets of products – FZ5 EdgeBoard AI Box and the FZ5 Card. The FZ5 EdgeBoard AI Box is an AI-focused computing platform that is based on the FZ5 AI Accelerator card which is an upgrade of the FZ3 card. The FZ5 looks more like a single board computer than an actual computing card. The FZ5 accelerator is powered by the Xilinx Zynq UltraScale+ ZU5EV MPSoC which features a 1.5 GHz quad-core Arm Cortex-A53 64-bit application processor, a 600MHz dual-core real-time Arm Cortex-R5 processor, a Mali400 embedded GPU and is capable of delivering up to 2.4 TFLOPS as compared […]

September 17, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NXP i.MX 8M Plus AI Systems-on-Modules and Devkits Launched by Variscite

NXP i.MX 8M Plus processor was unveiled at the very beginning of the year as the first i.MX processor with AI hardware acceleration provided by a 2.3 TOPS Neural Processing Unit (NPU) embedded in the chip. Apart from the upcoming Wandboard 8MPLUS SBC, we had not seen hardware powered by the new processor, but Variscite has now announced two NXP i.MX 8M Plus systems-on-modules – VAR-SOM-MX8M-PLUS and DART-MX8M-PLUS – and corresponding development kits. VAR-SOM-MX8M-PLUS CPU Module & Development Kit Specifications: SoC – NXP i.MX 8M Plus single, dual or quad-core Cortex-A53 processor clocked at up to 1.6 (Industrial/Extended) or 1.8GHz (Commercial), Cortex-M7 real-time core @ 800 MHz, 1080p H265/H264 encode/decode, AI/ML acceleration up to 2.3 TOPS, GC7000UL 3D GPU, GC520L 2D GPU System Memory – 1 to 4GB LPDDR4 Storage – 8 to 64GB eMMC flash Networking – 802.11 ac/a/b/g/n + BT 4.2/BLE module SO-DIMM Edge Connector Storage I/F – […]

September 16, 2020February 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DR6018 V2 Embedded WiFi 6 Router Board Adds Support for WiFi 6E and 5G IoT M.2 Cards

DR6018 V2 WiFi 6E & 5G IoT Embedded Board

A few months ago we covered DR6018 (aka CP01) WiFi 6 Embedded SBC powered by Qualcomm IPQ6018 processor and offering six Ethernet ports including five Gigabit interfaces and one 2.5 Gbps Ethernet port. Wallys Communications has now informed CNX Software they had a new version of the board called DR6018 V2 with a more compact form factor, support for PoE, as well as optional WiFi 6E and 5G IoT M.2 modules. DR6018 V2 board specifications: SoC – Qualcomm Atheros IPQ6010 quad-core Arm Cortex-A53 processor @ 1.8 GHz System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, SD card slot Networking Wired 3x Gigabit Ethernet ports (one less compared to DR6018) 1x Gigabit Ethernet port with PoE support 1x 2.5Gbps Ethernet port Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO […]

September 16, 2020September 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Pinephone Multiboot Image Boots 13 Different Linux Distributions

Pinephone Multiboot 13 Linux distributions

You’ve certainly heard about dual-boot systems with Windows and Linux, and possibly about triple-boot systems with an extra OS like Chromium OS or Android, but pine64’s forum user Megous has gone much further with a multiboot image for Pinephone able to boot 13 different Linux distributions! You’d think the image would occupy a lot of space on the device, but since all 13 distributions share the same Linux 5.9 kernel, all 13 operating systems fit on the internal eMMC flash or a MicroSD card with 8GB or greater capacity. The image is based on the p-boot bootloader allowing you to select the distribution of your choice and supports all PinePhones from the Braveheart Edition to the most recent revisions with 3GB RAM and 32GB storage. So what Linux distributions are supported by the multiboot image exactly? Here’s the list: Arch Linux Arm 2020-09-08 Lune OS 0.113 Maemo Leste 20200906 Mobian […]