Linux Category - Page 212 of 603 - CNX Software

October 1, 2020October 2, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Vizy AI camera runs Tensorflow, OpenCV, PyTorch on Raspberry Pi 4 (Crowdfunding)

We previously covered Charmed Labs PIXY2 computer vision camera based on an NXP LPC4330 microcontrollers that worked with Arduino, Raspberry Pi, and other development boards. The company is now back with a fully integrated more powerful solution with Vizy AI camera featuring a Raspberry Pi 4 SBC with up to 8GB RAM. Vizy AI camera key features and specifications: SBC – Raspberry Pi 4 with Broadcom BCM2711 quad-core Arm Cortex-72 processor, up to 8 GB RAM Camera – High-resolution camera based on Sony iMX477 12.3 MP sensor that can capture at over 300 frames/second and support both daytime and nighttime viewing; Both M12 and C/CS lenses are supported Video Output – 2x micro HDMI ports Audio – Analog stereo audio port Networking – Gigabit Ethernet, dual-band WiFi 5, and Bluetooth 5.0 USB – 2x USB 3.0 ports, 2x USB 2.0, 1x USB Type-C port from Raspberry Pi 4 (But not […]

September 29, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi CM3+ based Iono Pi Max industrial controller comes with an impressive number of I/Os

As the Raspberry Pi Compute Module 4 is only expected for next year, companies are still launching products based on Raspberry Pi Compute Module 3+ (CM3+), and Sfera Labs has just introduced Iono Pi Max industrial computer powered by a Raspberry Pi CM3+ system-on-module. Housed in a DIN rail enclosure, the Linux controller offers Fast Ethernet, three USB ports, isolated CAN and serial boards, some analog I/Os, a relay, as well as a real-time clock (RTC), integrated UPS, and more. Iono Pi Max specifications: SoM compatibility Iono Pi Max 3+ – Already fitted with Raspberry Pi Compute Module 3+ (Lite, 8GB, 16GB, or 32GB eMMC version) Iono Pi Max Solo – Barebone model compatible with Raspberry Pi Compute Module 3, CM3 Lite, CM3+ 8GB/16GB32GB, and CM3+ Lite MCU – Microchip SAME54 Cortex-M4F microcontroller with 1 MB flash, 256 KB RAM connected to the Raspberry Pi module via I2C, USB and […]

September 28, 2020September 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

TQ Embedded Unveils Intel Elkhart Lake COM Express and SMARC 2.1 Computers-on-Module

German technology company TQ Embedded has unveiled the TQMxE40 computer-on-module families based on the Intel Atom x6000E series, as well as Intel Pentium and Celeron N and J “Elkhart Lake” processors that comply with COM Express Mini, COM Express Compact, and SMARC computer-on-module standards. The company’s TQMxE40M, TQMxE40S, and TQMxE40C1/C2 embedded modules are offered with all twelve Intel Elkhart Lake processors, up to 64GB RAM, and a -40°C to +85°C industrial temperature range. The computers-on-module are especially suited to industrial automation, medical technology, measurement technology, robotics as well as transport and logistics applications. TQMxE40M COM Express Mini Module Specifications: SoC – Intel Atom x6000E Series or Intel Pentium and Celeron N and J Series part of Elkhart Lake family with 4.5 W to 12 W TDP System Memory – 4, 8, 16 GB LPDDR4/4x with IBECC (In-band EEC) Storage – 8 to 256 GB eMMC flash, 32kbit EEPROM COM Express […]

September 28, 2020September 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Tiny Rock Pi S SBC gets PoE & audio HAT add-on board

Powered by a Rockchip RK3308 quad-core Cortex-A35 processor, Radxa Rock Pi S single board computer was launched with specifications listing PoE support via an add-on board. Just one little problem though: it was not available for sale. The good news is that Radxa has now launched a PoE HAT for the Linux SBC adding support for 802.3af PoE up to 10W input, making it one of the smallest single board computers with PoE support in the world, and adding audio features with a 3.5mm audio jack, and an FPC connector for a microphone array. It can be purchased on Seeed Studio for $13.00. Here are the specifications of the complete solution with Rock Pi S SBC and PoE HAT: SoC – Rockchip RK3308 quad-core Arm Cortex-A35 processor @ up to 1.3 GHz with built-in Voice Activity Detector (VAD) System Memory – 512MB RAM Storage – 1GB SD NAND flash, MicroSD […]

September 25, 2020March 1, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ECM-EHL 3.5-inch SBC with Elkhart Lake Embedded SoC Offers Wide Voltage Input, Industrial Temperature Range

Yesterday, Intel introduced the Atom x6000E series together with some Celeron/Pentium processors part of the new Elkhart Lake processor family designed for embedded and IoT applications. We’ve already covered Congatec’s upcoming Elkhart Lake Pico-ITX SBC and CPU modules, but we should expect more related news in the coming days and weeks, and Avalue Technology has just introduced ECM-EHL 3.5-inch SBC powered by Elkhart Lake Embedded SoCs that offers wide voltage input, and industrial temperature range. Avalue ECM-EHL specifications: SoC – Intel Pentium/Celeron/Atom x6000E Elkhart Lake SoC with Intel UHD Graphics – 4.5 to 12W TDP System Memory – Single 260-pin DDR4 SODIMM socket for up to 32GB DDR4 3200MTs SDRAM (“Factory ECC” supported) Storage 1x M.2 Key-B 2242 socket 1x SATA III connector 256Mbit SPI flash for AMI BIOS Video Output HDMI 2.0b up to 4096×2160 @ 60Hz DP 1.4a up to 4096×2160 @ 60Hz eDP1.3 up to 4096×2160 @ […]

September 24, 2020September 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Intel Tiger Lake UP3 COM Express Module Offers High AI Performance, PCIe Gen4 Interface

cExpress-TL Tiger Lake UP3 COM Express Module

Earlier today, Intel announced the Elkhart Lake IoT edge processor family, and as well as more 15W Tiger Lake Core i3/i5/i7 UP3 processors designed for IoT & embedded applications, and with a configurable TDP from 12W to 28W. ADLINK Technology is leveraging existing and those new Tiger Lake UP3 processors with the cExpress-TL COM Express Type 6 module based on the various Intel Core i7/i5/i3 and Celeron Tiger Lake UP3 SKUs delivering three times the AI inferencing performance of older platforms thanks to AVX-512 Vector Neural Network Instructions (AVX512 VNNI) instructions and equipped with the latest PCIe Gen4 expansion interface. cExpress-TL COM Express Tiger Lake module specifications: SoC (one or the other) Intel Core i7-1185G7E quad-core/octa-thread processor with 12MB cache, Intel Iris Xe graphics with 96x EU; up to 28W TDP (cTDP 15W) Intel Core i5-1145G7E quad-core/octa-thread processor with 8MB cache, Intel Iris Xe graphics with 80x EU; up to […]

September 24, 2020September 24, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Congatec Unveils Atom x6000E Elkhart Lake Powered Pico-ITX SBC, Qseven, SMARC, COM Express Modules

With the announcement of Intel Elkhart Lake IoT-optimized processors, we should expect embedded systems companies to unveil their own Atom x6000E and Celeron/Pentium Elkhart Lake powered products, and one of the first to do so is Congatec with the introduction of four different Elkhart Lake computers-on-module (CoM) following Qseven, SMARC, and COM Express standards, as well as a Pico-ITX SBC. conga-PA7 Atom x6000E SBC (with Celeron/Pentium J optional) Detailed specifications: SoC – Choice of eight different Elkhart Lake processors from the 6W Atom x6211E dual-core processor to the 10W Intel Pentium J6425 quad-core processor up to 3.0 GHz, all with 10th Gen Intel UHD graphics System Memory – Up to 16GB quad-channel onboard LPDDR4x Storage 32GB or 64GB UFS 2.0 flash (optional up to 512GB) M.2 SATA/PCIe SSD support (see expansion) 32 MB serial flash for AMI Aptio UEFI firmware Video DisplayPort DP++ video output up to 4Kp60 1x USB-C […]

September 23, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks Venice Industrial IoT SBC Family Features Dual Ethernet and mPCIe Sockets

US-based Gateworks is known for its Ventana and Newport embedded networking single board computers, and the company has now introduced a third family with Venice SBC family based on NXP i.MX 8M Mini SoC with support for multimedia capabilities through MIPI-DSI, MIPI-CSI and I2S Audio headers, and targetting industrial IoT with dual Ethernet, and mini PCIe expansion sockets that can be used for 802.11ax/ac/b/g/n WiFi, 5G/4G/3G/CATM1 cellular modems, and more. The company plans to introduce four different models with GW7100, GW7200, GW7300, and GW7400 with an increase in size and feature set for each model, and mechanically compatible with previous Gateworks families. But at launch, only GW7300 SBC is available so we’ll focus our reporting on this particular model. Gateworks GW7300 specifications: SoC – NXP i.MX 8M Mini single, dual or quad-core Arm Cortex-A53 processor @ up to 1.6GHz, with Arm Cortex-M4 at 400+MHz, 3D GPU (OpenGL ES 2.0), 2D […]