Linux Category - Page 173 of 598 - CNX Software

August 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Tiger Canyon Porcoolpine fanless Tiger Lake NUC announced for $679 and up

Simply NUC “Tiger Canyon Porcoolpine” is a fanless Intel NUC offered with a choice of Tiger Lake UP3 processors, notably Core i3-1115G4, Core i5-1135G7, and Core i7-1165G7, and equivalent vPro parts when available. The mini PC comes with up to 64GB DDR4, NVMe & SATA storage, a Thunderbolt 4 port, two HDMI 2.0b ports, 2.5 GbE networking, and optional Wi-Fi 6 and Bluetooth 5.1, as well as a DB9 serial port for industrial applications, for example, to connect a barcode scanner. Tiger Canyon Porcoolpine (NUC11TF) specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core/quad-thread processor @ up to 3.0 / 4.1 GHz (Turbo) with 6MB L3 cache, 48EU Intel Xe graphics; 28W TDP Intel Core i5-1135G7 quad-core/octa-thread processor @ up to 2.4 / 4.2 GHz with 8MB L3 cache, 80EU Intel Xe graphics; 28W TDP Intel Core i5-1145G7 (vPro) quad-core/octa-thread processor @ up to 2.6 / 4.4 GHz with […]

August 19, 2021August 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Banana Pi BPI-M2S Amlogic A311D SBC comes with dual GbE, HDMI & MIPI interfaces

There’s at least one more Amlogic A311D SBC coming our way with Banana Pi BPI-M2S equipped with 4GB RAM, 16GB eMMC flash, as well as two Gigabit Ethernet ports, combines with video interfaces that include HDMI, MIPI DSI & CSI, as well as two USB ports. This news comes just a few after we wrote about Geniatech DB10 AI development board based on Amlogic A311D hexa-core Cortex-A73/A53 processor and noted there were few platforms based on the SoC, apart from Khadas VIM3 SBC, and a few others. Banana Pi BPI-M2S SBC specifications: SoC – Amlogic A311D hexa-core processor with 4x Arm Cortex-A73 cores, 2x Arm Cortex-A53 cores, Arm Mali-G52 MP4 (6EE) GPU with OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0 support, 5 TOPS NPU System Memory – 4GB LPDDR4 Storage – 16GB eMMC flash (option up to 128GB), MicroSD card slot Video interfaces HDMI 2.1 output up to 4Kp60 […]

August 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Realtek AP-Router SDK vulnerabilities could impact millions of routers and IoT devices

The IoT Inspector Research Lab has discovered four high and critical vulnerabilities in the Realtek AP-Router “Jungle” SDK used for RTL819x SoCs that could impact millions of WiFi routers and dongles. An attacker can use a network attack, e.g. without physical access to the device, to generate a buffer or stack overflow helping him access the system and execute his own code. Realtek has released an advisory (PDF) with patchsets for all four vulnerabilities so you should upgrade the firmware if you can. Summary of the four vulnerabilities: CVE-2021-35392 – Realtek Jungle SDK version v2.x up to v3.4.14B provides a ‘WiFi Simple Config’ server called wscd or mini_upnpd that implements both UPnP and SSDP protocols. The server is vulnerable to a heap buffer overflow that is present due to unsafe crafting of SSDP NOTIFY messages from received M-SEARCH messages ST header. CVE-2021-35393 – Also impacts ‘WiFi Simple Config’ server (wscd […]

August 17, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi 4 gets IEEE1588 Precision Time Protocol (PTP) with Real-Time HAT

Raspberrry Pi 4 PTP protocol with the real-time HAT

InnoRoute Real-Time HAT adds IEEE1588 Precision Time Protocol (PTP) to Raspberry Pi 4/3 via a Xilinx Artix-7 FPGA and three Gigabit Ethernet ports. The Precision Time Protocol (PTP) is used to very accurately synchronize clocks throughout a computer network to enable measurement and control systems. It is often found in embedded microcontrollers or processors from Texas Instruments, STMicro, and more recently, in Intel Elkhart Lake & Tiger Lake H processors. It can notably be used for Time-Sensitive Networking (TSN) and Audio Video Bridging (AVB). InnoRoute Real-time HAT specifications & key features: FPGA- Xilinx Artik-7 FPGA Some RAM Networking Gigabit Ethernet port 0 with IEEE1588/TSN signaling Gigabit Ethernet port 1 with input from Raspberry Pi 4 Gigabit Ethernet port 2 with PoE, without TSN Host interface – 40-pin Raspberry Pi header mostly for SPI and I2C interfaces used for configuration. Misc – 3x LEDs, JTAG and PMod connectors, EEPROM (for Raspberry […]

August 16, 2021April 8, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

5G compatible Arm Pico-ITX SBC is expandable through multi-function I/O board

IBASE IBR215 SBC plus IO expansion board

IBASE IBR215 is a 2.5-inch Pico-ITX SBC powered by NXP i.MX 8M Plus quad-core ARM Cortex-A53 AI processor that supports 5G cellular connectivity via an M.2 3052 socket, and can be extended with an I/O expansion board with support for WiFi/BT, 4G/LTE, LCD, camera, NFC & QR-code functions. Equipped with up to 4GB RAM and 128GB flash storage, the single board computer has a ruggedized and fanless design that makes it suitable for industrial automation, smart home and buildings, smart cities and factories, retail environment, machine learning, and other industrial IoT applications. IBASE IBR215 specifications: SoC – NXP i.MX 8M Plus quad-core Arm Cortex-A53 processor @ up to 2.0 GHz with 512KB ECC cache, Arm Cortex-M7 @ up to 800 MHz, Vivante GC7000UL 3D GPU, Vivante GC520L 2D GPU, HiFi 4 DSP, 2.3 TOPS Neural Processing Unit (NPU) System Memory – 3GB DDR4 (optional 1/2/4GB) Storage 16GB eMMC flash (optional […]

August 16, 2021September 26, 2022 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

PineNote is a community supported 10.3-inch e-Reader based on Rockchip RK3566 SoC

We’ve covered several e-readers in the past, but the PineNote 10.3-inch e-reader will be a bit different, as the hardware & software will be entirely developed by the community like other Pine64 platforms such as Pinebook Pro, PineCone, Rock64 single board computer, etc… Based on the Rockchip RK3566 quad-core Cortex-A55 processor, PineNote will be one of the fastest e-readers on the market, and leverage the code already written for Quartz64 single board computer, including mainline Linux support. PineNote (preliminary) specifications: SoC – Rockchip RK3566 quad-core A55 processor with Mali-G52 EE GPU, 0.8 TOPS NPU (AI accelerator) System Memory – 4GB of LPDDR4 RAM Storage – 128GB eMMC flash Display – 10.3-inch panel with 1404×1872 resolution (227 DPI), 16 levels of grayscale, front light with cool (white) to warm (amber) light adjustment, capacitive glass layer for finger touch-based input, and a Wacom electromagnetic resonance layer (EMR) for EMR pen input. There’s […]

August 15, 2021August 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Debian 11 “BullsEye” released with Panfrost & Lima GPU drivers, exFAT support, driverless printing

Debian 11 “BullsEye” has been released with Panfrost & Lima open-source drivers for Arm GPUs, in-kernel exFAT file system, driverless printing, and many more updates, plus a 5-year support window. Debian’s release is significant as the Linux operating system serves as the base for Ubuntu and derivatives, Raspberry Pi OS, and together with Ubuntu, is one of the operating systems supported by Armbian which offers images for a range of Arm-based single board computers. Arm Mali GPU support in Debian 11 I remember a few years ago 3D graphics acceleration on Arm boards was news, as it was quite a challenge to get it working due to binary blobs. But Debian 11 now comes with Mesa 20.3 framework which includes Panfrost and Lima open-source Mali GPU drivers by default, as well as the Vulkan 1.0 conformant V3DV driver for Raspberry Pi 4. As noted in the documentation that means the […]

August 14, 2021August 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

NanoPi R2C is a cheaper dual GbE mini router with YT8521S Gigabit Ethernet PHY

FriendlyELEC’s NanoPi R2C is an updated version of NanoPi R2S dual GbE mini router that replaces Realtek RTL8211E Gigabit Ethernet transceiver with a Motorcomm YT8521S chip. NanoPi R2C mini router still comes with a Rockchip RK3328 quad-core Cortex-A53 processor, 1GB DDR4 memory, and a Realtek RTL8153 USB 3.0 to Ethernet controller for the second Ethernet port. NanoPi R2C specifications: SoC – Rockchip RK3328 quad-core Cortex-A53 @ 1.5 GHz with Arm Mali-450MP2 System Memory – 1GB DDR4 RAM Storage – MicroSD Slot, SPI flash footprint Connectivity 1x Gigabit Ethernet (WAN) up to 941 Mbps (measured) via MotorComm YT8521S Gigabit Ethernet transceiver 1x Gigabit Ethernet (LAN) up to 941 Mbps (measured) via Realtek RTL8153 USB 3.0 to Ethernet controller USB – 1x USB 2.0 Type-A host port, USB Type-C port Debugging – 3-pin 2.54mm pitch header for serial console Expansion – 10-pin GPIO header with GPIOs, I2C, UART, IR_Rx, 5V, 3.3V and GND […]