Linux Category - Page 162 of 597 - CNX Software

November 10, 2021November 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Raspberry Pi inspired Intel SBC supports Myriad X AI accelerator, 5G connectivity

Axiomtek KIWI310 may look like a Raspberry Pi SBC but it packs an Intel Celeron N3350 processor, an M.2 slot with support for Myriad X AI accelerator, and the company also offer a HAT with 5G cellular connectivity. The single board computer also comes with up to 4GB LPDDR4 memory, up to 64GB eMMC flash, a Micro HDMI port, two USB 3.0 and two USB 2.0 ports, as well as the ubiquitous 40-pin GPIO header. Power options are also an improvement over your typical Raspberry Pi board with USB-C PD as well as LiPo battery support. Axiomtek KIWI310 specifications: SoC – Intel Celeron N3350 dual-core Apollo Lake processor @ 1.1 GHz / 2.4 GHz (Turbo) with Intel HD Graphics 500; 6W TDP System Memory – Up to 4GB (specs) or 8GB (YouTube video) LPDDR4 Storage – Up to 64GB eMMC flash, SPI flash for AMI BIOS Video & audio output […]

November 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

NXP i.MX 93 processor combines Cortex-A55 cores with Ethos U65 microNPU

NXP has unveiled the i.MX 93 processor family comprised of i.MX 935x, 933x, 932x, and 931x parts at this time with up to two Cortex-A55 cores, one Arm Cortex-M33 real-time core, as well as an Ethos U65 microNPU for machine learning (ML). We wrote about i.MX 9 family back in March with NXP telling us it would include an Arm Ethos U-65 microNPU and EdgeLock secure enclave, be manufactured with a 16/12nm FinFET class process, and includes the “Energy Flex” architecture to optimize power consumption by turning on/off specific blocks in the processor. The NXP i.MX 93 is the first family leveraging those new features, and we know have some more details. NXP i.MX 93 processor specifications: CPU 1x or 2x Arm Cortex-A55 @ 1.7 GHz with 32KB I-cache, 32KB D-cache, 64KB L2 cache, 256KB L3 cache with ECC 1x Arm Cortex-M33 @ 250 MHz low power microcontroller with 256KB […]

November 9, 2021November 9, 2021 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

NVIDIA Jetson AGX Orin 12-core Cortex-A78E module delivers up to 200 TOPS

The upcoming NVIDIA Jetson AGX Orin module packs some serious processing power with a 12-core Cortex-A78AE processor, 2048 CUDA cores, and 64 Tensor cores delivering up to 200 TOPS of AI performance, or 6 times more than its predecessor, the Jetson AGX Xavier module. Designed for robotics, autonomous machines, medical devices, the Jetson AGX Orin delivers the same performance as a GPU-enabled server, but in a much more compact 100 x 87mm form factor. The module can be operated in three power modes, namely 15W, 30W, or 50W depending on performance and power requirements, and a compact developer kit will also be made available. Jetson AGX Orin specifications: CPU – 12-core Arm Cortex-A78AE v8.2 64-bit processor with 3MB L2 + 6MB L3 cache GPU / AI accelerators NVIDIA Ampere architecture with 2048 NVIDIA CUDA cores and 64 Tensor Cores @ 1 GHz DL Accelerator – 2x NVDLA v2.0 Vision Accelerator […]

November 8, 2021July 4, 2023 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

SOQuartz – Raspberry Pi CM4 compatible Rockchip RK3566 SoM launched for $35 and up

SoQuartz Raspberry-Pi CM4 compatible module

Radxa CM3 Raspberry Pi 4 alternative was just introduced yesterday, but today, Pine64 SOQuartz Compute Module has just become available for $34.99 and up. Pine64 announced the Raspberry Pi Compute Module 4 compatible Rockchip RK3566 system-on-module (SoM) last June, and today the company/community launched three SOQuartz models with a wireless module and equipped with either 2GB, 4GB, or 8GB RAM. SOQuartz system-on-module preliminary specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor up to 1.8 GHz with 32-bit RISC-V MCU, Arm Mali-G52 GPU supporting OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1, 0.8 TOPS NPU for AI acceleration System Memory – 2GB to 8GB LPDDR4 Storage Optional 128 Mbit SPI flash Optional eMMC module from 16GB up to 128GB capacity or soldered-on eMMC module (see bottom of board) Wireless module – Azurewave AW-CM256SM WiFi 5 802.11ac & Bluetooth 5.0 wireless module plus an u.FL antenna connector. 2x 100-pin high-density board-to-board connectors with: […]

November 8, 2021November 8, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

ODROID-N2+ review with Ubuntu 21.10 using Wayland and Panfrost

ODROID-N2+ was launched in July 2020, but I only got the Amlogic S922X Rev C SBC recently with Hardkernel wanting me to test their latest Ubuntu 21.10 image with the Panfrost open-source GPU driver. ODROID-N2+ Kit Unboxing Let’s start by checking out the kit I received from the Korean SBC manufacturer. The package includes ODROID-N2+ single board computer fitted with a 32GB eMMC flash module, a 12V/2A power supply with an EU plug adapter, an 80mm fan kit, and a USB 3.0 to eMMC reader. ODROID-N2+ is now only available with 4GB RAM, as the old ODROID-N2 with 2GB was deprecated, and we get four USB 3.0 ports, HDMI 2.0 video output, Gigabit Ethernet networking, and a 40-pin GPIO header with the board cooled by a larger heatsink attached to the bottom of the board. Fan installation, first boot, and system information As we’ll see below the fan is not […]

November 7, 2021November 7, 2021 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Radxa CM3 – A drop-in Raspberry Pi CM4 alternative

Radxa E23 minimal Radxa CM3 carrier board

Radxa CM3 is a system-on-module that offers an alternative to the Raspberry Pi CM4, with the same form factor allowing it to become a drop-in replacement, but switching from a Broadcom BCM2711 processor to a Rockchip RK3566 quad-core Cortex-A55 SoC. Radxa CM3 will work with existing carrier boards for the Raspberry Pi Compute Module 4, albeit some features such as dual HDMI are not available, instead, providing a single HDMI, but the module also offers extra features through an additional 100-pin board-to-board with interfaces such as SATA III and USB 3.0. Let’s compare Radxa CM3 specifications to the ones of Raspberry Pi CM4. Comparing Broadcom BCM2711 quad-core processor and Rockchip RK3566, as the Cortex-A72 may still be faster on some workloads despite the lower frequency, and some other workloads may be dramatically faster on RK3566, for example for those using Armv8 Crypto extensions missing on all Raspberry Pi, which we […]

November 4, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

PICO-EHL4 Pico-ITX SBC features Elkhart Lake CPU for IoT Edge applications

AAEON PICO-EHL4-Pico-ITX SBC Elkhart Lake

AAEON PICO-EHL4 is a Pico-ITX single board computer based on Intel Atom x6000E, Celeron and Pentium “Elkhart Lake” processors designed for IoT edge applications. The SBC supports up to 16 GB LPDDR4 RAM via two SO-DIMM sockets as well as eMMC and SATA storage, offers two HDMI 2.0b video outputs, dual Gigabit Ethernet, two USB 3.0 interfaces, as well expansion capabilities via mini PCIe and M.2 sockets. AAEON PICO-EHL4 specifications: Elkhart Lake SoC Atom x6425RE quad-core @ up to 1.9GHz; 12W TDP Atom x6414RE quad-core @ up to 1.5GHz, 9W TDP Atom x6212RE dual-core @ up to 1.2GHz; 6W TDP Atom x6425E quad-core @ up to 1.8GHz, up to 3GHz; 12W TDP Atom x6413E quad-core @ 1.5GHz, up to 3GHz; 9W TDP Atom x6211E dual-core @ 1.2GHz, up to 3GHz; 6W TDP Pentium J6426 quad-core @ 1.8GHz, up to 3GHz; 10W TDP Pentium N6415 quad-core @ 1.2GHz, up to 3GHz; […]

November 4, 2021March 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 340 Comments

Giveaway Week – Orange Pi R1S Kit

Day 4 of giveaway week will be another product sent directly from the manufacturer, as Shenzhen Xunlong Software agreed to send an Orange Pi R1 Plus kit for free to a randomly selected winner. Just like the FriendlyELEC’s NanoPi R2S we’ve offered earlier this week, Orange Pi R1 Plus comes with a Rockchip RK3328 processor and dual Gigabit Ethernet, as well as 1GB RAM. The kit also includes a plastic enclosure. While I did not have the opportunity to test the board myself, James Dawson did, and found both Ethernet ports to achieve close to Gigabit Ethernet speed, with the processor delivering decent performance. Software-size, Shenzhen Xunlong Software provides Ubuntu, Debian, OpenWrt, and even Android images on the resources page, but some people also managed to run the Armbian image for NanoPi R2S or RockPi E boards. To enter the draw simply leave a comment with your country and whatever […]