Linux Category - Page 158 of 597 - CNX Software

December 14, 2021January 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

5G IoT/AIoT industrial gateway ships with Raspberry Pi Compute Module 4

WPC-632-Pi CM4 is an industrial IoT gateway based on Raspberry Pi Compute Module 4 with optional 5G or 4G LTE cellular connectivity, that joins other Raspberry Pi CM4 industrial gateways such as CompuLab IOT-GATE-RPI4, CatsPi Industrial Lite, Modberry M500 CM4, among others. The Linux gateway features two Ethernet ports, RS232/RS485 and other I/Os via terminal blocks, mPCIe and M.2 sockets for expansion with 5G modem 4G LTE mode, AI accelerator, or an NVMe SSD, as well as support for 9V to 32V wide-range input power. WPC-632-Pi CM4 industrial gateway specifications: SoM – Raspberry Pi Compute Module 4 with Broadcom BCM2711 quad-core Cortex A72 processor with VideoCore VI GPU, up to 8GB RAM, up to 32GB flash, optional wireless module Storage – Optional PCIe SSD via M.2 key M socket Video and audio output – 1x micro HDMI port up to 4Kp60 with audio Camera – 1x MIPI CSI-2 connector Connectivity […]

December 13, 2021December 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cincoze DI-1100 is a fanless embedded computer with an optional external fan

Fanless embedded computer with external fan

Cincoze DI-1100 is a rugged, modular embedded computer powered by an Intel Whiskey Lake processor that comes in a fanless metal enclosure with heat dissipation fins, but the company also offers an external fan that clips on top of the metal case for additional cooling when using high-power peripherals such as PoE cameras. Designed for autonomous robots, in-vehicle use, environmental monitoring, and other industrial applications, the computer supports -40 to 70°C wide temperature range, 9 to 48 VDC input voltage range, and comes with plenty of I/Os including two Gigabit Ethernet ports, six USB ports, two RS232/422/485 interfaces, as well as mini PCIe sockets, and CFM and CFI expansion modules. Cincoze DI-1100 specifications: Intel Whiskey Lake SoC (one or the other) Intel Core i7-8665UE quad-core processor up to 4.4 GHz with Intel UHD Graphics 620; 15W TDP Intel Core i5-8365UE quad-core processor up to 4.10 GHz with Intel UHD Graphics […]

December 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

The cheapest Jasper Lake mini PC so far: JK01 for $140 and up

Intel Jasper Lake N-Series Celeron and Pentium processors were formally introduced at the beginning of the year as the successors of the Gemini Lake (Refresh) processors, and we’ve seen several mini PCs and motherboards so far from lesser-known Chinese manufacturers to more established brands like ASUS, GIGABYTE, and ECS. The previous generation Gemini Lake mini PCs would usually sell around $150 to $200, but now with the JK01 barebone computer, we’ve got an inexpensive Intel Celeron N5095 Jasper Lake mini PC selling for about $141 including shipping. CYX JK01 mini PC specifications: SoC – Intel Celeron N5095 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with 4MB cache, 16EU Intel UHD Graphics; 15W TDP System Memory – 2x SO-DIMM slots for up to 16GB DDR4 memory Storage – M.2 2280 socket for NVMe or SATA SSD, 2.5-inch SATA drive bay, MicroSD card socket Video Output – 1x HDMI 2.0 […]

December 10, 2021December 9, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Sifive Essential 6-Series RISC-V processors target Linux, real-time applications

SiFive has been busy. Just a few days after SiFive Performance P650 announcement, the company has announced the SiFive Essential 6-Series RISC-V processor family starting with four 64-bit/32-bit real-time core, and two Linux capable application cores, plus the SiFive 21G3 release with various improvements to existing families. SiFive Essential 6-Series range of RISC-V processors There Essential 6-Seris family is comprised of three sub-families with two processors each: E6 Series with 1.91 DMIPS/MHz, 3.69 CoreMark/MHz E61-MC – Quad-core 32-bit embedded processor E61 – Mid-range performance 32-bit embedded processor (one-core) S6 Series with 2.07 DMIPS/MHz, 3.73 CoreMark/MHz S61-MC – Quad-core 64-bit embedded processor S61 – Mid-range performance 64-bit embedded processor (one-core) U6 Series with 2.07 DMIPS/MHz, 3.73 CoreMark/MHz U64-MC – Quad-core 64-bit application processor U64 – Mid-range performance Linux-capable processor (one-core) E6-Series and S6 Series real-time processors have practically the same features except for the 32-bit and 64-bit cores, and a different […]

December 9, 2021December 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

A deep dive into Raspberry Pi Zero 2 W’s power consumption

Raspberry Pi Zero 2 W Power Consumption measurements with Otii Arc

When I completed my review of Raspberry Pi Zero 2 W, I mentioned I would test the power consumption of the board later. It took a while, but I’ve finally come around it using Otii Arc from Qoitech and Otii software to provide some pretty power consumption charts, and even energy consumption. Since the Raspberry Pi Foundation recommends a 5V/2.5A power supply, I’ll first try to get as close as possible as 2.5A, then I’ll go through tricks to reduce idle power consumption to less than 75 mA / 375 mW, and finally check the energy consumption under various CPU core count and frequency. Raspberry Pi Zero 2 W Power consumption under load, with accessories I started with the latest Raspberry Pi OS Lite “Bullseye” image and connected my Raspberry Pi Zero 2 W board to Qoitech Otii Arc tools as shown below. It used to cost around $500, but […]

December 9, 2021December 9, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

ECS LIVA Z3 & Z3E mini PCs to ship with up to Pentium Silver N6000 Jasper Lake SoC

ECS has introduced the LIVA Z3 and LIVE Z3E mini PC equipped with an Intel Jasper Lake processor, either Pentium Silver N6000, or Celeron N5100/N4500, and designed for office, home entertainment, online learning, business applications such as digital signage, self-service kiosk, and more. The mini PCs support up to 16GB DDR4 dual-channel RAM, ship with up to 128GB eMMC 5.1 flash, which can be expanded with an M.2 PCIe 2280 SSD or/and a 2.5-inch SATA drive. ECS LIVA Z3(E) also comes with HDMI 2.0 and mini DisplayPort 4K video outputs, Gigabit Ethernet and WiFi 6 connectivity, as well USB 3.2 Gen 2 USB-C port. ECS LIVA Z3 specifications: Jasper Lake SoC (one or the other) Intel Celeron N4500 dual-core processor @ 1.1GHz / 2.8GHz (Burst frequency) with Intel UHD graphics; 6W TDP Intel Celeron N5100 quad-core processor @ 1.1GHz / 2.8GHz (Burst frequency) with Intel UHD graphics; 6W TDP Intel […]

December 9, 2021December 5, 2021 by Sponsored Post - 12 Comments

StarFive VisionFive single board computer officially for sale, accelerating RISC-V ecosystem development (Sponsored)

San Francisco, U.S. – Dec. 8, 2021- at RISC-V Summit 2021, StarFive Technology Co., Ltd. (hereinafter “StarFive”), the leader of RISC-V software and hardware ecosystem in China, announced that “VisionFive” single-board computer is officially for sale. The availability of VisionFive signifies a breakthrough in RISC-V hardware for high-end applications to help accelerate the innovations of the global RISC-V industry and promote the improvement and development of the open-source software ecosystem to drive the realization of more innovative top-layer RISC-V applications. VisionFive open-source hardware enables a new level of innovation for the RISC-V ecosystem VisionFive, the first generation of cost-effective RISC-V single-board computer is designed to run Linux, with StarFive’s JH7100 vision processing SoC. The JH7100 SoC is equipped with a 64-bit high-performance RISC-V dual-core processor with a 2MB L2 cache, running at 1.5GHz, which is excellent for high-performance computing. The JH7100 SoC is further equipped with the deep learning processing […]

December 8, 2021December 24, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

LoRa expansion boards work with Raspberry Pi SBC and Raspberry Pi Pico board (Crowdfunding)

We’ve covered a number of LoRa solutions based on Raspberry Pi boards, and SB Components is now offering another with the LoRa HAT for Raspberry Pi equipped with an Ebyte E22 LoRa module operating in either the 433 MHz, or 868 and 915 MHz bands. The company also offers a LoRa expansion for Pico based on the same E22 module, adding a small 1.14-inch LCD for information display, and designed for the Raspberry Pi Pico board with the RP2040 dual-core Cortex-M0+ microcontroller. LoRa HAT for Raspberry Pi specifications: LoRa connectivity LoRa Module (one or the other) Ebyte E22-900T22S based on SX1262, operating in the 850 MHz to 930 MHz band Ebyte E22-400T22S based on SX1268, operating in the 410 MHz to 493MHz band Supported frequencies – 433 MHz, 868 MHz, 915 MHz Range – Up to 5 km line-of-sight Antenna – SMA antenna connector USB – 1x Micro USB port […]