Linux 2.6 Category - CNX Software - Embedded Systems News

August 14, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR ARM9 Linux Development Boards & Computer-on-Modules Powered by Freescale i.MX28 Processor

MYIR MYD-IMX28X development boards and MYC-IMX28X CPU modules had been announced in May 2014, but I’ve just found out about them via the company’s newsletter. The CoMs are powered by Freescale i.MX28 ARM9 processors (i.MX283 or i.MX287), feature 128 MB RAM, 256 MB Flash, and connect to a baseboard to make the development boards. Target applications include smart gateways, human-machine interfaces (HMIs), handheld devices, scanners, portable medical, experimental education as well as other industrial applications. MYC-IMX28X CoMs MYC-IMX28X computer-on-module specifications: Processor – Freescale i.MX283 or i.MX287 ARM926EJ-STM processor up to 454MHz with 128KB SRAM, 128KB ROM, 1280 bits of OCOTP ROM, 16KB/32KB I and D Cache System Memory – 128MB DDR2 SDRAM Storage – 256MB NAND flash, 128KB SPI flash Connectivity – On-board Ethernet PHY Connectors – 2x 1.27mm pitch 2 x 40-pin SMT male expansion connectors with access to Ethernet – Up to 2 Ethernet (two for i.MX287, one for i.MX283) USB […]

July 13, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Juice Extreme 2 Android TV Home Gateway Features 4 DVB Tuners for Multiscreen Support

Antik Technology, a Slovakia based company, has developed a Android set-top-box powered by STMicro StiH416 SoC. I wrote about the StiH416 development platform previously, and although it’s just a dual core Cortex A9 SoC, its video capabilities are impressive as it supports multiple simultaneous video decoding streams. The set-top box called Juice Extreme 2 leverages those capabilities with 4 DVB tuners (DVB-T or DVB-S2) that provide four different streams, and transcode them, to all video playback devices around your home such as TV, PC, tablet and smartphones, or record them to an internal SATA drive. JUICE EXTREME 2 key features: SoC – STMicro STiH416 (Orly) dual core Cortex A9 @ 1.2 GHz + ARM Mali 400MP4 GPU System Memory – 2 GB DDR3 Storage – 1 GB Flash + internal SATA connector + SD card slot Video: Quadruple DVB Tunner CVBS/Y Pb Pr (3.5mm jack) Tuner board connector RF IN/OUT […]

June 3, 2013June 3, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Emcraft Systems STM32F4 SoM and Starter Kit Run uCLinux From On-Chip Flash

Emcraft has recently announced a new system-on-module based on STMicro STM32F437 Cortex M4 micro-controller, as well as a starter kit based on the module that can run uCLinux directly from STM32F437’s 2MB on-chip flash, allowing a faster boot time, and AFAIK, this is the only Linux-ready STM32 platform available on the market. Here are the specifications of Emcraft Systems SOM-STM32F4: MCU – STMicro STM32F437 Cortex M4 @ 168 MHz with 256KB RAM and 2MB flash External Memory – 16MB PSRAM External Storage – 16MB NOR Flash Ethernet PHY (Optional) Connectors – 2x SoM Connectors with access to I/Os: USB, Ethernet, I2C, SPI, UART, LCD I/F, ADC, DAC, GPIO… Dimensions – 30 mm x 46 mm To speed-up development and for evaluation, the company also provides a starter kit composed of the STM32F4 SoM, and a baseboard (SOM-BSB-EXT) with the following main features: USB interface using USB-UART bridge connected to UART […]

April 30, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Artila Matrix-516 ARM9 Industrial Linux Computer Features 8 RS-485 Ports

Artila Matrix-516 is a Linux-based industrial computer powered by Atmel AT91SAM9G20 CPU (ARM9) with 64MB SDRAM and 128MB NAND Flash inside, and several I/O interface including 8 isolated RS-485 serial ports. This device targets industrial applications, including intelligent transportation system (ITS), building automation, energy-saving system, and factory automation. Here are the specifications of this industrial Linux computer: CPU – ATMEL AT91SAM9G20 w/MMU @ 400MHz System Memory – 64MB SDRAM Storage – 128MB NAND Flash + 2MB DataFlash for system backup (recovery boot) + micro SD socket (Up to 32 GB) Network Interface – 2 x 10/100BaseT, RJ-45 connector with 1.5KV magnetic isolation TTY(Serial) Ports 8 x isolated RS-485 (2500Vrms isolation). Connector: terminal block Baud Rate: up to 921.6Kbps Parity: None, Even, Odd, Mark, Space Data Bits: 5, 6, 7, 8 Stop Bit: 1, 1.5, 2 USB Ports – 2x USB Host Ports, 1x client port (reserved). Up to full-speed (12Mbps) […]

March 19, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

iWave Systems Launches RainboW-G12M-Q7 SoMs Powered by TI Sitara AM389x/DM816x Processor

iWave Systems, an embedded systems company based in Bangalore, India, has unveiled new Qseven Modules powered by Texas Instruments Sitara AM389x/DM816x ARM Cortex-A8 microprocessor clocked up to 1.5 GHz. Rainbow-G12M-Q7 modules target applications such as Single-Board computers, network and communication processing, industrial automation, human machine interface (HMI), medical electronic devices, video surveillance systems and interactive Point-of-Service (PoS) kiosks. Here are the modules specifications: CPU – TI AM389x/DM8168 ARM Cortex-A8 based Sitara Processor operating up to 1.5 GHz Memory: 1GB DDR3 SDRAM 128 MB NAND Flash On-Board Micro SD slot 230-pin Qseven Edge Connector: 1x PCIe v2.0 1x HDMI 1.3 2x SATA LVDS channel 1 x USB 2.0 Host | 1x USB 2.0 device I2S Port SD/SDIO SPI & I2C ports Expansion Connector: Gigabit Ethernet HD Video IN/OUT Ports Analog Video OUT Audio IN/OUT ports UART, GPIOs Form factor – Qseven R1.20 compatible (70mm x 70mm) Temperature Range – 0 to […]

January 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

VIA ARMOS-800 Embedded System Features a Freescale i.MX537 based Pico-ITX Board

VIA Technologies has recently announced the VIA ARMOS-800, an fanless system designed around VIA VAB-800 Pico-ITX board powered by Freescale i.MX537 processor. The VIA ARMOS-800 provides a ruggedized low-power system for industrial and in-vehicle applications such as a digital signage. Here are VIA ARMOS-800 specifications: Processor – 800MHz Freescale Cortex-A8 single core i.MX537 System Memory – 1GB DDR3-800 SDRAM using 128M x16 memory devices Storage – 4GB onboard eMMC Flash memory + ob-board micro SD connector Graphics – Supports two integrated graphics processing units: an OpenGL ES 2.0 3D graphics accelerator and an OpenVGTM 1.1 2D graphics accelerator Video Output – VGA and HDMI Audio I/O – Line-In, Line-out, Mic-in connectors Connectivity: Ethernet – 10/100 PHY transceiver (SMSC LAN8720A) Wi-Fi – Optional VIA 802.11n Wireless module VNT 9271 USB – 3x USB connectors + 1x on-board USB 2.0 pin header COM – 1x D-Sub 9-pin female connector CAN – […]

June 25, 2012June 25, 2012 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Monkey, an Open Source High Performance Embedded Web Server

Some time ago, I mentioned 5 web servers (mathopd, thttpd, busybox httpd, boa and lighttpd) suitable for embedded systems (including those featuring no MMU processors) and low end machines. I’ve recently come across Monkey web server, a lightweight open source Web Server for Linux (2.6.29 or greater), which has been designed with focus in embedded devices. Monkey is currently supported on ARM, x86 and x64, although a quick analysis of the source code shows it forks, so it won’t be supported on processors that do not feature a memory management unit (MMU) without modifications. Monkey supports the following features: HTTP/1.1 compliant Virtual Hosts Asynchronous networking model (event-driven) Indented configuration Plugins Support C API Interface Other features through base plugins: SSL Security Log writter Directory Listing Shell: Command line The developers have benchmarked Monkey against busybox httpd and nginx on a now well-know ARMv6 platform: the Raspberry Pi. They used Siege […]

June 11, 2012June 11, 2012 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

GeneralPlus GP3300 Cortex A8 Processor and Android Tablet Reference Design

I’ve recently come across Eken D70 Tablet which is a typical 7″ Android ICS tablet, except it’s product description shows a Cortex A8 chip called GP33003. After some research, I found that this chipset is provided by GeneralPlus (previously part of Sunplus). GP3300x application processor features a cortex A8 clocked at 1 GHz together with a PowerVR SGX531 GPU, and comes in 216pins LQFP package. This SoC integrates LVDS and HDMI, and the company told me that the GP33XX targets “higher resolution displays, but still keep the lower PCB cost, compared to its current competitors”. It also features an hardware video decoder and encoder (up to 1080p), and can handle a 720p full-duplex video conference. That’s about all the information I could get about the SoC itself. I’ll update this post If I find out more. The company also provides a tablet reference design (GP3300xA Tablet) with the following specifications: […]