Security Tip – How to detect Juice Jacking on Android smartphones

A few years ago I wrote about the danger of “juice jacking” highlighting the security risks posed by USB charging in public places, where a bad actor could attempt to hack your phone or laptop to steal your precious data or install malware/ransomware. In most cases, there are no risks at home, but it’s when you charge your device in a public place notably an airport or train station that you could be at risk of hacking. If you’re using an Android phone, there’s an easy way to detect Juice Jacking, and whether something fishy is going on as shown in the screenshots below. On the left screenshot, I connect my phone to a USB charger, all that changed was the battery icon changed to show it’s charging. But on the right screenshot, I connected my smartphone to my laptop, and since it’s trying to access data, I’m offered three […]

Year 2020 in review – Top ten posts and stats

CNX Software Year 2021

It’s this time of the year when we look back at what happened, and what may be next. 2020 did not pan out as planned in more ways than one, but there were still some interesting developments. Based on 2019 announcements, 2020 was promising to be an exciting year for Amlogic and Rockchip with the expected launch of RK3588 and S908X high-end processors for 8K capable devices,  but we’ll have to wait for 2021 for this to happen. Instead, the most interesting processor of the year from the Allwinner, Amlogic, and Rockchip offerings was probably Amlogic S905X4 processing adding AV1 hardware decoding. As pointed out in our “RISC-V 2020 highlights” post, it was a fairly eventful year for RISC-V architecture, although there’s still a long road ahead, especially for application processors. We had seen some general-purpose and Bluetooth RISC-V MCUs in 2019, but 2020 saw the launch of the first […]

Pumpkin i500 SBC uses MediaTek i500 AIoT SoC for computer vision and AI Edge computing

Pumpkin i500 SBC

MediaTek Rich IoT SDK v20.0 was released at the beginning of the year together with the announcement of Pumpkin i500 SBC with very few details except it would be powered by MediaTek i500 octa-core Cortex-A73/A55 processor and designed to support computer vision and AI Edge Computing. Pumpkin i500 hardware evaluation kit was initially scheduled to launch in February 2020, but it took much longer, and Seeed Studio has only just listed the board for $299.00. We also now know the full specifications for Pumpkin i500 SBC: SoC – MediaTek i500 octa-core processor with four Arm Cortex-A73 cores at up to 2.0 GHz and four Cortex-A53 cores, an Arm Mali-G72 MP3 GPU, and dual-core Tensilica Vision P6 DSP/AI accelerator @ 525 MHz System Memory – 2GB LPDDR4 Storage – 16GB eMMC flash Display – 4-lane MIPI DSI connector Camera – Up to 25MP via MIPI CSI connector Video Decoding – 1080p60 […]

KTR1 high-performance Amlogic S922X portable gaming console coming soon

KT R1 S922X portable gaming console

Hardkernel recently unveiled plans to launch ODROID-Go Super portable retro-gaming console with a larger 5-inch display at the end of January. The console is still based on the relatively low-end Rockchip RK3326 quad-core Cortex-A35 processor coupled with just 1GB RAM found in ODROID-Go Advance. It does the job for the emulators targetted by the platform, but for a wider range of emulators, a faster processor, and more memory would be nice to have. That’s what the developers of KTR1 portable game console aim to achieve with a much more powerful Amlogic S922X hexa-core Cortex-A73/A55 processor and up to 4GB RAM. KTR1 preliminary specifications: SoC – Amlogic S922X hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 1.8 GHz, 2x Arm Cortex A53 cores @ 1.9 GHz, Arm Mali-G52MP4 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB LPDDR4 RAM Storage – 16 to 128GB […]

Banana Pi BPI-M5 SBC with 4GB RAM, 16GB flash launched for $53

Banana Pi BPI-M5

Last September, we wrote Banana Pi team was working on an Amlogic S905X3 SBC called BPI-M5 and very similar to Hardkernel ODROID-C4 board launched in April 2020. At the time, we noted the Banana Pi BPI-M5 did add a 16GB eMMC flash on-board by default, while ODROID-C4 requires booting from a MicroSD card or a separate eMMC flash module. We also pointed out software and community support is usually much better for the ODROID board, and it was brought to our attention that BPI-M5 board uses 5V voltage only via USB-C, while the Hardkernel board support a wider 5.5V to 17V via a power barrel jack, and this could lead to potential power issue for customer connecting drives to USB 3.0 ports. The good news is that you can now buy Banana Pi BPI-M5 SBC on Aliexpress for $53 plus shipping. Banana Pi BPI-M5 specifications haven’t changed, and we can […]

Orange Pi R1 Plus router SBC features Rockchip RK3328, Dual GbE

Orange Pi R1 Plus

FriendlyELEC NanoPi R2S SBC for headless applications with Rockchip RK3328 processor and dual Gigabit Ethernet ports is getting some competition, as with Orange Pi R1 Plus board, Shenzhen Xunlong Software has updated its Orange Pi R1 board powered by an Allwinner H2+ to RK3328 processor coupled with 1GB RAM, and offering dual Gigabit Ethernet ports, plus one USB port for router applications. Orange Pi R1 Plus board specifications with highlights in bold or stricken through showing differences against R1 board: SoC –Rockchip RK3328 quad-core Cortex-A53 @ 1.5 GHz with Arm Mali-450MP2 System Memory – 1GB DDR4 RAM Storage – MicroSD card slot, 16 MB SPI flash Connectivity – 2x Gigabit Ethernet via RTL8211E transceiver and RTL8153B USB 3.0 to Ethernet chip + 802.11 b/g/n WiFi (Realtek RTL8189ETV) with u.FL antenna connector and external antenna USB – 1x USB 2.0 port, 1x USB-C OTG port Expansion headers Unpopulated 26-pin “Raspberry Pi […]

Foenix 21-5-inch Android 8.1 smart touch computer features MediaTek MT8167A Cortex-A35 SoC

Foenix Touch Console Mediatek MT8167A Smart Display

Earlier this week, we covered Wireless Tag’s Industio 7-inch smart display powered by a SigmaStar SSD201 32-bit Arm Cortex-A7 processor and offering both Ethernet and WiFi 4 connectivity. If you’d like a 64-bit processor, a much larger display size, and faster wireless connectivity,  Innocomm has just introduced the “Foenix Touch Console”  21.5-inch open-frame touch computer based on the same MediaTek MT8167A quad-core Cortex-A35 processor as found in the PlayStation Classic, and capable of Ethernet and WiFi 5 (AC) networking. Foenix iCOM1019 touch console preliminary specifications: SoC – MediaTek MT8167A quad-core Cortex-A35 processor @ up to 1.5 GHz with PowerVR GE8300 GPU System Memory – 2GB  RAM Storage – 8GB storage, MicroSD card slot Display – 21.5-inch PCAP touchscreen display with 1920×1080 resolution Video Output – Optional HDMI 1.4a Audio – 2-channel 6W amplifier, 2x digital microphones, 3.5mm 4-pole audio jack Camera – Optional 2MP front-facing camera Connectivity 10/100M Ethernet (RJ45) […]

Android’s 3D mapping aided GPS enables improved urban GPS accuracy

Urban GPS -accuracy 3D mapping

One of the best features of smartphones is GNSS location with standards like GPS that allows you to get directions or share your location with friends or business contacts. It works great in most cases, but getting an accurate location may be challenging in urban areas due to tall buildings that block the signal to the satellites and create reflections. This can be an issue for ride-sharing apps for example, as the applications may detect the wrong side of the street you are on, either forcing the client to cross the street (when possible) or the driver to take a detour to reach your location. This problem may soon go away in Android phone thanks to 3D mapping aided GPS corrections. So how does that work exactly? Google explains: The 3D mapping aided corrections module includes tiles of 3D building models that Google has for more than 3850 cities around […]

UP 7000 x86 SBC