Android Category - Page 38 of 453 - CNX Software

June 21, 2022June 21, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Vecow unveils MediaTek Genio 350, Genio 500, and Genio 1200 system-on-modules and development kits

Vecow has announced a series of new system-on-modules and development kits based on Mediatek Genio 350, Genio 500, or Genio 1200 processors for AIoT applications ranging from smart security, smart retail, and traffic vision to digital signage. This follows last week’s news about ADLINK LEC-MTK-I12000 SMARC module and devkit powered by MediaTek Genio 1200 Cortex-A78/A55 AIoT processor, but Vecow also offers solutions based on the entry-level Genio 350 quad-core Cortex-A53 processor, and the mid-range Genio 500 octa-core Cortex-A73/A53 processor. ESOM-MT-350 Genio 350 system-on-module and devkit Specifications: SoC – MediaTek Genio 350 quad-core Cortex-A53 processor @ 2.0GHz with Mali-G52 GPU with support for OpenGL ES 3.2, OpenCL ES 2.0, and Vulkan 1.1, 1080p60 H.265/H.264 video decoder System Memory – 2GB LPDDR4 SDRAM Storage – 16GB eMMC flash Wireless – MT7668 WiFi 5 and Bluetooth 4.2 module with IPEX connector Audio – MediaTek MT6390/6357 audio codec Debugging – On-module debug console port […]

June 16, 2022July 11, 2022 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MECOOL KP1 smart projector runs Android 11 for TV on Amlogic S805X2 TV Stick

MECOOL KP1 is a Full HD projector equipped with the MECOOL KD5 HDMI dongle powered by an Amlogic S805X2 quad-core Cortex-A35 processor with 1GB RAM and 8GB flash and running Android 11 for TV. Most Android projectors are equipped with a low-end processor accompanied by an outdated version of Android, and while the Amlogic S805X2 SoC found in the KP1 is not a workhorse, Android 11 for TV OS should make it useable for a few more years, and it might even be possible to upgrade the TV stick down the road. MECOOL KP1 specfications: TV Stick – MECOOL KD5 with SoC – Amlogic S805X2 quad-core Arm Cortex-A35 processor with Arm Mali-G31 MP2 GPU, 1080p60 10-bit AV1, H.265, VP9 P-2, H.264, AVS2, MPEG4/2/1 video decoder System Memory – 1GB LPDDR4 Storage – 8GB eMMC flash Video Output – HDMI 1.4 port Connectivity – Dual-band WiFi 5 and Bluetooth 4.2 OS […]

June 10, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Light sensors add “lift and learn” feature to digital signage player

Light sensors with digital signage lift and learn

Light sensors are used to turn on/off lights, adjust the brightness of displays, and more. But I’ve come across a use case I never thought of: object presence detection. In the digital signage work, such features if called “lift and learn”, and light sensors are used to detect when an object is present and play a video or display information about the product. That concept came to my attention when I saw a photo of Mekotronics R29 digital signage player with several cables coming out of the device and attached to what looked like white hockey pucks and turned out to be light sensors. Apart from the light sensors, Mekotronics R29 specifications are pretty standard: SoC – Rockchip RK3399 hexa-core processor with 2x Cortex-A72 cores, 4x Cortex-A53 cores, Arm Mali-T860MP4 GPU, 4K VP9, H.264, H.265, and 1080p60 VC-1, MPEG-1/2/4, VP6/8 video decoder System Memory – 4GB DDR Storage – 64GB […]

June 9, 2022June 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kodi 20 “Nexus” Alpha 1 gets AV1 hardware decoding, DietPi 8.5 released

I’ll combine two unrelated short news about software releases for TV boxes, Raspberry Pi, and other SBCs: Kodi 20 “Nexus” Alpha 1 media center, and DietPi 8.5 lightweight Debian-based image for SBC’s. Kodi 20 “Nexus” Alpha 1 The first alpha release of Kodi 20 “Nexus” is out with one highlight being support for AV1 hardware video decoding in Android and x86 (VAAPI) platforms with AV1-capable GPU or VPU. Other notable changes include: FFMPEG upgraded to version 4.4 Plenty of subtitle related changes: Added Steam Deck built-in controller support Initial support for M1 native including native windowing/input handling Pipewire support in Linux Various PVR improvements including in terms of performance when a large number of channels is displayed You’ll find more details in the announcement. The RetroPlayer project based on Kodi, but adding some game-related features, has also released some test images based on Kodi 20. Note that since it’s an […]

June 7, 2022January 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

TI Sitara AM623 & AM625 Cortex-A53 SoCs offer low-power AI for HMI and IoT applications

Texas Instruments has just launched the new Sitara AM62 family with AM623 and AM625 single to quad-core Cortex-A53 processors designed to provide IoT gateways and HMI applications with AI processing at low power, in some cases with up to 50% reduction in power consumption. The AM623 processor specifically targets Internet of Things (IoT) applications and gateways that may benefit from object and gesture recognition, while the AM625, equipped with a 3D GPU, should power HMI applications with edge AI and up to two full-HD displays. Sitara AM623 and AM625 processors Sitara AM623/AM625 key features and specifications: CPU – Single, dual, or quad-core Arm Cortex-A53 processor @ up to 1,400 MHz with 512KB L2 shared cache, plus 32KB I+D cache per core Co-processor – 1x Arm Cortex-M4F real-time core at up to 400 MHz with 256KB SRAM with SECDED ECC GPU (AM625 only) – Unnamed 3D GPU with support for OpenGL […]

June 1, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Quartz64 Model B SBC with 4GB RAM is now available for $59.99

While it may be hard to buy a Raspberry Pi these days, there are various alternatives with the Raspberry Pi 3/4 form factor, including Pine64’s Quartz64 Model B SBC powered by a Rockchip RK3566 processor that has just launched for $59.99 with 4GB RAM. The Quartz64 Model B is a smaller version of the Quartz64 Model A launched earlier this year, that comes with HDMI 2.0a and MIPI DSI display interfaces, a MIPI CSI camera interface, Gigabit Ethernet, WiFi 5 and Bluetooth 5.0, as well as several USB 2.0/3.0 ports, and of course, a 40-pin Raspberry Pi compatible GPIO header. Quartz64 Model B specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor up to 1.8 GHz with Arm Mali-G52 GPU supporting OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1, 0.8 TOPS NPU for AI acceleration System Memory – 4GB LPDDR4 Storage 128 Mbit SPI Flash optional eMMC module from 16GB up to […]

May 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Lightweight wireless AR Smart Viewer reference design is powered by Snapdragon XR2 platform

Snapdragon XR2 wireless AR smart viewer reference design

Qualcomm unveiled a new Wireless AR Smart Viewer Reference Design powered by the Snapdragon XR2 platform last week with very few details, but the company has now demonstrated the system to some members of the press, so let’s have a closer look. The reference design aims to provide a similar level of performance as a headset connected to PC or premium smartphone, but with some of the processing offloaded to the Snapdragon XR2 processor, thereby eliminating the need for a cord while still achieving lag-free experiences in combination with the Qualcomm FastConnect 6900 WiFi 6 and Bluetooth 5.3 solution. It is supposed to offer a 40% thinner profile and a more balanced weight distribution than the earlier Snapdragon XR1 smart glasses reference design. Wireless AR Smart Viewer reference design specifications: SoC – Qualcomm Snapdragon XR2 with Octa-core processor with 1x Kryo Gold prime @ 2.84 GHz + 3x Kryo […]

May 26, 2022December 14, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Rockchip RK3588 CPU module exposes more I/Os through four board-to-board connectors

We’ve already seen several Rockchip RK3588 modules with Firefly Core-3588J, Turing RK1, and Banana Pi RK3588_CV1, all with an edge connector to insertion into the carrier board. Rongpin RD-RK3588 system-on-module is a little different with four board-to-board connectors that enable a slightly more compact design, and should expose more I/Os than say a 314-pin MXM edge connector. The module ships with up to 16GB of RAM, 128 GB of storage, a Rockchip RK806-1 PMIC, and the company also offers a development kit with RD-RK3588-B baseboard fitted with the module for evaluation and early software development. RD-RK3588 board-to-board module RD-RK3588-C core module specifications: SoC – Rockchip RK3588 octa-core processor with 4x Arm Cortex-A76 cores @ up to 2.4 GHz, 4x Arm Cortex-A55 cores, Arm Mali-G610 MP4 GPU with support for OpenGL ES3.2, OpenCL 2.2, Vulkan1.1, 6 TOPS NPU, 48MP ISP, 8Kp60 video decoding, 8Kp30 video encoding System Memory – 4GB, 8GB, […]