Category: Hardware

Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on MXQ S85 Android TV Box Based on Amlogic S805 is Available for $50

MXQ S85 Android TV Box Based on Amlogic S805 is Available for $50

Android media players powered by Amlogic S805 quad core processor such as TV110 are already pretty cheap at around $60, but there’s currently a deal on Gearbest where you can get MXQ S85 for less than $50 without Bluetooth and about $55 with Bluetooth by using BackToSchool8 coupon to get 8% discount. Prices include shipping. MXQ S85 specifications: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with quad core Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB NAND flash + micro SD slot (up to 32GB) Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, and optional Bluetooth 4.0. Video Output – HDMI 1.4, AV output Audio Output – HDMI, AV, optical S/PDIF USB – 2x USB 2.0 ports + 1 x micro USB OTG port Misc – IR sensor Power Supply – 5V/2A Dimensions – 11.4x 11.4 x 2.3 cm Weight – 137 grams […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on VIA ARTiGO 1300 Quad Core x86 Rugged Digital Signage Player

VIA ARTiGO 1300 Quad Core x86 Rugged Digital Signage Player

VIA has recently announced ARTiGO 1300, a rugged digital signage player powered by a VIA quad core E-Series x86 processor with VX11PH media processor, provides two HDMI outputs for independent displays, USB 3.0 ports, Gigabit Ethernet and more. Beside digital signage applications, it can also be used for kiosks, menu boards, HMIs, and other IoT applications.   ARTiGO A1300 Specifications: Processor – VIA QuadCore E-Series @ 1.0 GHz Chipset – VIA VX11PH Media System Processor with Chrome 645/640 GPU for 2D/3D, and hardware video decoding  support (MPEG-2, WMV9, VC-1 and H.264) System Memory – 1x DDR3 1066/1333 SODIMM socket (up to 8GB) Storage – Support 1x 2.5” SATA SSD/HDD, 1x mSATA SSD. 32Mbit Flash memory for AMI Aptio UEFI BIOS. Video Output – 2x HDMI ports supporting resolutions up to 1920 x 1080 pixels. Dual independent HDMI display support. Audio – VIA VT2021 High Definition Audio Codec, Line-in and Line-out Connectivity […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Creating and Flashing an Android Image from Rockchip RK3288 SDK

Creating and Flashing an Android Image from Rockchip RK3288 SDK

Following up on my post explaining how to build Android for RK3288 TV box, I’ve generated a firmware image, and flashed it to Tronsmart Orion R28 Meta TV box to see if it could boot properly. There’s basically no information in the Andoird SDK explaining how to do basic things like building from source, and generating and flashing the resulting image, so I’d like to thanks Linuxium, Droidmote and Naobsd for their various tips. Since I’ve built everything from source, I’m using a Linux machine, but you should be able to create and flash the Android image in Windows using tools in RKTools/windows folder. First let’s copy the required, and freshly built, files to create the firmware:

We’ll also need to edit package-file follows (I only had to change the bootloader field):

And now create the firmware file:

The firmware file update.img can be flashed with upgrade_tool […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on WeIO is an Open Source Hardware IoT Board Programmable from a Web Browser (Crowdfunding)

WeIO is an Open Source Hardware IoT Board Programmable from a Web Browser (Crowdfunding)

WeIO is an open source hardware board for the Internet of things with Wi-Fi connectivity and lots of I/Os designed by nodesign, a French based startup, in collaboration of 8devices, the makers of the Carambola boards. WeIO is powered by an Atheros AR9331 SoC running OpenWRT as well as an NXP LPC MCU for faster handling of I/Os and support for analog I/Os. One interesting aspect of this board is that it can be programmed via a web browser using HTML5 or Python, and it does not rely on the Cloud to store data. WeIO hardware specifications: SoC – Atheros AR9331 MIPS 24K Wireless SoC @ 400 MHz MCU – NXP LPC11xx ARM Cortex M0 MCU for analog I/O and real-time H/W interfaces System Memory – 64 MB DDR2 Storage – 16 MB flash + micro SD slot Connectivity – 802.11 b/g/n Wi-Fi with on-board antenna (AP and STA modes), […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Infineon XMC 2Go Cortex M0 Development Kit Sells for 5 Euros

Infineon XMC 2Go Cortex M0 Development Kit Sells for 5 Euros

Infineon brought another tiny, portable, and cheap ARM Cortex M0 board to market with XMC 2Go development kit featuring XMC1100 ARM Cortex M0 micro-controller with 16KB RAM, 64KB Flash, and tow breadboard friendly headers to access various serial interfaces and ADC pins.   Key features listed on Infineon website: MCU – Infineon XMC1100 ARM Cortex-M0 MCU @ 32 MHz with 64KB flash, 16KB RAM. Debugger – On-board J-Link Lite Debugger using an XMC4200 Microcontroller. Headers – 2×8 pin headers suitable for Breadbord with access to 2x USIC (Universal Serial Interface Channel: UART, SPI, I2C, I2S, LIN), 6x 12-bit ADC, external interrupts (via ERU), 4x 16-bit timers Misc – 2 x user LED, RTC Power – 5V Micro via USB, or 3.3V external power. ESD and reverse current protection Dimensions – 14.0 x 38.5 mm The board is programmed via USB using the same Dave IDE I tried with XMC4500 Relax […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on $125 Com 1 Android Wear Watch Powered by Ingenic JZ4775 MIPS Processor (Crowdfunding)

$125 Com 1 Android Wear Watch Powered by Ingenic JZ4775 MIPS Processor (Crowdfunding)

If you’d like to get an Android Wear watch, but are not quite ready to spend $200+ for the models currently available, the Com 1 Android Wear smartwatch could be interesting as you may get one for as low as $125, albeit with higher risks since it’s part of a flexible funding Indiegogo campaign. The watch is powered by Ingenic JZ4775 MIPS processor, features a 1.6″ AMOLED display, and is IP67 rated (Water- and dust-proof). Com 1 watch hardware specifications: SoC –  Ingenic JZ4775 XBurst (MIPS) processor @ 1.0 GHz with 2D graphics, and VPU (MPEG-2, MPEG-4, VC-1, H.264, VP8, RV9), 720p@30fps System Memory – 375 MB LPDDR1 Storage – 4 GB eMMC Display – 1.6” AMOLED touchscreen display, 320 x 320 resolution, 16.7 Million Colors , LED back light, Brightness: 300 cd/m^2. Connectivity – WiFi (802.11 a/b/g/n at 2.4/5 GHz), Bluetooth 4.0 + EDR (BLE Compliant), FM, and NFC Sensors – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on Tronsmart Orion R28 Meta RK3288 TV Box Unboxing

Tronsmart Orion R28 Meta RK3288 TV Box Unboxing

GeekBuying sent me one of their Tronsmart Orion R28 Meta (Beta) Android TV boxes powered by Rockchip RK3288 SoC. This model comes with 2GB DDR3, 16 eMMC, and 802.11 b/g/n/ac Wi-Fi. R28 Mega is the mid-range model, and there are two others models R28 Pro (entre-level) and R28 Telos (premium). I’ve already listed specifications for the three Tronsmart Orion R28 models. Today, I’ll show some picture of the device, and the board to find out more about the design of the product. Before reviewing the product in another post, I’ll probably build the image using the provided Android 4.4 SDK (provided I can download it), and perform the full review next week with the resulting firmware. Tronsmart Orion Meta R28 Unboxing I’ve received the parcel via DHL within 2 days. The same package will be used for all three models, but you’ll have a sticker on the side for Pro, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Intrinsyc OPEN-Q 8084 Development Kit Powered by Qualcomm Snapdragon 805 Processor

Intrinsyc OPEN-Q 8084 Development Kit Powered by Qualcomm Snapdragon 805 Processor

Inforce Computing IFC6540 was the first low cost development board powered by Qualcomm Snapdragon 805 processor I discovered a few months ago, but is currently “for pre-approved customers only and have not yet been released to public”. Intrinsyc has now launched their own Snapdragon 805 development kit called OPEN-Q 8084 based on a mini-ITX carrier board, and a SoM with 3GB RAM, and 16GB eMMC. The board target applications include ruggedized tablets, digital signage, government/public safety, medical, robotics, wearable displays, video streaming/conferencing, gaming systems, and in-flight entertainment. Specifications of APQ8084 Open-Q System-on-Module: SoC – Qualcomm Snapdragon 805 (APQ8084) quad core Krait 450 @ 2.5GHz, with Adreno 420 GPU @ 500MHz, Hexagon QDSP6 V5A (600MHz), and two ISPs for up to 55-megapixel stereoscopic 3D System Memory – 3GB PoP LPDDR3 RAM Storage – 16GB eMMC 5.0 flash, expandable to 64GB, micro SD signals, and SATA signals (via MXM connector) Connectivity – […]

Exit mobile version
UP 7000 x86 SBC