EZChip TILE-Mx100 is a Network Processor with 100 ARM Cortex A53 Cores

As ARM gets into the server and networking business, the number of ARM cores in SoC starts to shoot up, and after Cavium ThunderX 48 core processor, here comes EZChip TILE-Mx100 Hecta-core network processor with 100 ARM Cortex A53 cores and capable of delivering up to 200 Gigabit throughput. Key features listed for EZchip TILE-Mx100: One hundred 64-bit ARM Cortex A53 CPU cores in one chip 3-level coherent cache architecture with over 40 Mbytes on-chip cache. DDR4 DRAM controllers with ECC and supporting up to 1TBytes of memory. SkyMesh coherent architecture for massive bandwidth, low latency and linear scalability Multitude of networking hardware accelerators for high-performance data-path packet processing including Wire-speed mPIPE packet processing engine delivering 300 million packets-per-second I/O. Integrated 5-level hierarchical Traffic Manager with 256,000 queues. MiCA™ acceleration engines for over 100Gbps of crypto. Over 200Gbps of integrated I/O including 1G, 10G, 25G, 40G, 50G, 100G Ethernet, Interlaken, PCIe […]

Beam Android Projector Fits into Any Light Socket (Crowdfunding)

Four years ago, Seco showcased a prototype of a light bulb integrating a picoprojector and running Android, so you could fit it on the socket on your ceiling or compatible lamp. Now a company is planning to launch an Android projector that fits into E27, E26, or Bayonet light sockets called Beam. Beam projector specifications: SoC – Dual core processor @ 1.3GHz System Memory – N/A (1GB?) Storage – 8GB storage Projector LED pico projector; Currently 854×480 resolution, but it may be upgraded before the product ships ANSI 100 lumens 20,000 projection hours Max projection size – 120″ widescreen Throw ratop – 1.6:1 meaning at 1.8m, the project size will be 1.1m. Lamp function: 12 LED lights Audio – 2W stereo speakers Connectivity – 802.11 b/g/n Wi-Fi, Bluetooth 4.0 Light socket – E26, E27, or Bayonet via included adapter Power Supply – 110VAC to 240VAC Dimensions – N/A The version […]

DENX Computer Systems Introduces Atmel SAMA5D44 and Freescale i.MX6 System-on-Modules

Embedded World 2015 exhibition and conference will take place in Nuremberg, Germany on February 24-26, 2015, and we should expect interesting news related to MCU, industrial processors, and related development kits and boards next week. DENX Computer Systems has already unveiled two new SoM families with MA5D4 based on Atmel SAMA5D44 Cortex A5 processor, and M6R based on Freescale i.MX 6 Cortex A9 processors. DENX MA5D4 System-on-Module MA5D4 SoM specifications: Processor – Atmel SAMA5D44 Cortex A5 @ 528MHz with 720p hardware video decoder supporting H264/263, VP8, JPEG. System Memory – 128 – 512MB DDR2 RAM Storage – 4 – 32GB eMMC Flash (or optionally 256MB NAND Flash); 4 MB MByte SPI NOR-Flash; I/Os via 230-pin MXM2 edge connector Video Out / Display Support –  HDMI.  TFT controller, overlay support for image composition, resitive Touchscreen controller Camera – CMOS image sensor interface external bus A/D 25/16 bit 2x 10/100MBit Ethernet, IEEE1588 […]

Toucan-0700 HMI Panel Runs Linux or Android on Freescale i.MX6 Processors

TechNexion Toucan-0700 is an HMI (Human Machine Interface) panel based on Freescale i.MX6 modules and a baseboard following EDM standard for system-on-modules. The 7″ panel PC features the same EDM1-CF-IMX6 SoM used in Wandboard development boards, and runs various Linux distributions, as well as Android 4.3 or 4.4. Toucan-0700 specifications: SoC – Freescale i.MX6 Solo/Duallite Cortex A9 processor with Vivante GPUs (i.MX6 Dual/Quad on request) System Memory – 512MB (Solo), 1GB (Duallite) Storage – 4GB eMMC + micro SD slot Display – 7″ LCD display with LED backlight, 1024×600 resolution;  16M colors;  500 cd/m²; 4 points touchscreen Video Output – HDMI 1.4 for external display Connectivity – Gigabit Ethernet with POE function 802.3at, and optional WiFi 802.11 b/g/n + Bluetooth 4.0 (Broadcom BCM4330) USB – 1x USB 2.0 host port, 1x USB OTG 3.0 connector, 2x internal pin headers Serial – 1x RS-232 (galvanic isolated), 1x RS-232/422/485 (galvanic isolated), 2x […]

SoundMate WM201 Wi-Fi Music Streamer (EZMusic) Review

Last year I reviewed SoundMate M2 Wi-Fi audio streamer, and Uyesee has sent me a sample of their new SoundMate WM201 powered by Actions Semi AM8253, and based on EZCast app for audio calld EZMusic (EZCast Music). SoundMate WM201 Unboxing Pictures That’s the package for the device. The device comes with two audio cables, a micro USB to USB cable for power, and “SoundMate WiFi Music Streamer” user manual. Let’s have a closer look at the tiny box. Two LEDs are located on the front for power and connection, a micro SD slot can be found on the side, and the rear panel has most of the connection: micro USB port for power, reset pinhole, optical SPDIF, 3.5mm stereo jack, and USB 2.0 host for mass storage. SoundMate WM210 Teardown Take out of four sticky rubber pad on the bottom of the case, and loosen four screws to remove the […]

Blacksmith Genesis is an Affordable 3-in-1 3D Printer, Scanner, and Copier

Multifunction printers have been commonplace for many years, and allow you to print, scan, or copy any document with or without your computer, but when it comes to 3D is a little more complicated. First, it’s usually quite harder to design a 3D object than typing some text into a word processor, although 3D objects online database like thingiverse do help. If you want to copy a 3D object, you may have to buy a 3D scanner such as MakerBot Digitizer, and a 3D printer such as Makerbot Replicator 2 which takes space and costs about $3,000 in total. Multifunction 3D printer are slowly coming to market with for example AIO Robotics Zeus which recently shipped to backers, and is now available for $2,500. An other option is Singapore made BlackSmith Genesis, a compact multifunction 3D printer that can print, scan, and copy objects based on a rotary design, that […]

pcDuino3B Development Board Adds Gigabit Ethernet Support

pcDuino3 development board features Allwinner A20 dual core Cortex A7 SoC with support for SATA, HDMI, LVDS, Wi-Fi, Fast Ethernet, and Arduino compatible headers. Linksprite has now an updated version of the board that adds Gigabit Ethernet, while leaving the rest of the specs unmodified. pcDuino3B (aka pcDuino V3B) specifications: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz, with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector, and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support, LVDS header Audio Out –  3.5mm analog audio interface, I2S stereo digital audio interface Connectivity – Gigabit Ethernet, 802.11 b/g/n WiFi USB – 1x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. Camera – MIPI camera support Misc – IR receiver Power – 5V, 2000mA, support […]

HPH NT-V6 Firmware V1.4.4 (Rockchip RK3288) Fixes Ethernet Performance, Adds Smartphone App

When I first started to review Rockchip RK3288 based TV boxes I noticed several had critical issues with Ethernet including Nagrace HPH NT-V6 and Kingnovel K-R6. The main cons of the Nagrace media player included: XBMC has too many issues: VC1 not supported, H.265 support only partial, audio/video sync issue, some MPEG-2 and XVID videos are skipping frames, some of the 4K videos I used could play properly, etc… Some MPEG-2 file won’t play smooth in either XBMC or MX Player Potential Ethernet issues, confirmed with my Gigabit switch (D-Link DSG-1005A) and 10/100Mbps D-Link router (configured as a switch). Since then SPMC and Kodi must have improved video playback issues, but as late as last month I still got feedback from one person (Mr. B.) complaining about Ethernet on HPH NT-V6, but he finally got an email with a new firmware that is said to fix the Ethernet issues and […]

Exit mobile version
UP 7000 x86 SBC