Hardware Category - Page 906 of 1132 - CNX Software

July 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Nvidia SHIELD TV Benchmarks in Ubuntu Shows Core i3 Like Performance

Nvidia SHIELD Android TV was announced this March with Nvidia Tegra X1 octa-core Cortex A57 + A53 processor. So far, I had not seen any Ubuntu or other Linux distribution port, but Michael Mirabel of Phoronix got remote access to a Shield TV PRO – model with a 500GB hard drive – running Ubuntu 14.10. It’s not clear who provided access, either Nvidia or third parties, but somebody posted an Ubuntu 14.10 port on XDA Developers Forums recently so it might be that one. He obviously ran Phoronix Test Suite on the device, and compared to it some other ARM devices (Compule Utilite, Jetson TK1), MIPS Creator CI20, low power x86 devices (Compute Stick, Intel NUC with Celeron N2820), and an Intel Core i3-5010u NUC. The Tegra X1 platform easily beats all other low power platforms, and comes close to the Core i3 mini PC in most tests. In the […]

July 27, 2015July 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$55 UWatch UX Strapless Heart Rate Monitor Watch Syncs with iOS and Android Devices

Last time I checked about heart rate monitor, they required a chest strap to monitor ones heart rate, which I found cumbersome. It’s been while though, and I’ve now been informed that a low cost Bluetooth strapless heart rate monitor watch was available for $59.99 on GeekBuying. This type of product should provide a much more accurate evaluation of your daily calories burn rate than typical fitness bands based on an accelerometer and gyro sensor, but I’m not quite sure how they compare to the old models with a chest strap. Uwatch UX specifications and features: SoC – Mediatek Aster MT2501 ARM7 processor @ 108 MHz (A lower end version of MT2502 used in LinkIt One Devkit) System Memory – 32MB RAM Storage – 24MB NOR flash Heart rate monitor – Built-in photoelectric heart rate sensor Other sensors – magnetometer, 3-axis gravity and acceleration sensor Connectivity – Bluetooth 4.0 and […]

July 25, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi is a $16 WiFi and Bluetooth LE Linux Development Board

NanoPi is a new Linux development board powered by Samsung S3C2451 ARM9 processor with Wi-Fi and Bluetooth LE connectivity, connectors for a camera and an LCD display, as well as two expansion headers including a 40-pin “Raspberry Pi compatible” header. NanoPi specifications: Processor – Samsung S3C2451 ARM9 @ 400Mhz System Memory – 64M DDR2 Storage – micro SD slot Connectivity – AP6210 module for 802.11 b/g/n WiFi and Bluetooth 4.0 USB – 1x USB 1.1 host port, 1x micro USB OTG port for power and data (serial or Ethernet) Display I/F – LCD Interface: 0.5mm pitch SMT FPC seat, support full-color LCD (RGB: 8-8-8) Camera I/F – DVP Camera Interface: 0.5mm pitch FPC connector, including ITU-R BT 601/656 8-bit, I2C and GPIOs Debugging – Serial Port Expansion Headers “GPIO1” – 40-pin header including UART, SPI, I2C, GPIO pins (Raspberry Pi compatible) “GPIO2” – 12-pin header including I2S, I2C, UART pins Power – […]

July 24, 2015July 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

PiPo X1 is a Windows 10 Bay Trail HDMI TV Stick

PiPo used to the mostly know for its low cost tablets, but then they started launching ARM based mini PCs, and followed with x86 mini PCs such as the popular PiPo X7. Netbook Italia found out the company is now working on a new HDMI TV stick that will run Windows 10, but they must have run out of “lucky” names because the product will apparently be called PiPo X1, a name they already used for a Rockchip RK3188 TV stick… The hardware is not really interesting, as it has basically the same specs as the other Bay Trail-T sticks on the market: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Bust frequency: 1.83 GHz) with Intel HD graphics Gen 7 System Memory – 2 GB Storage – 32 GB eMMC + micro SD slot up Video & Audio Output – HDMI Connectivity – 802.11 […]

July 22, 2015July 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

ODROID-C1+ Board is an Upcoming Upgrade to ODROID-C1 Board

ODROID-C1 board has been relatively popular thanks to its great hardware features and good software support for its $35 price tag. In mid-June however, ODROID-C1 got out of stock due to sudden large orders, and it was only scheduled to sale again in early August because of long leadtime for some components. It turns out ODROID-C1 may never sell again, simply because it will be replaced by ODROID-C1+ with various improvements. It’s still very much based on ODROID-C1 with Amlogic S805 processor, 1GB RAM, and an eMMC sockets, but Hardkernel made the following improvements: HDMI connector change to Type-A from Type-D (micro HDMI). Improved SD card compatibility CEC function whether the RTC backup battery is installed or not ODROID-C1+ can be powered from the USB OTG port as well as DC-Jack I2S signals exposed for external audio DAC All of which are welcomed modifications. The board size will remain the […]

July 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Geniatech Showcases Amlogic T866 TV Box with 2 HDMI inputs, 1 HDMI output

Amlogic mostly makes SoCs for tablets, for example the M80x series, and TV boxes such as Amlogic S805 or S812, but they also have a processor family designed for Smart TVs such as Amlogic T866 quad core Cortex A9 processor @ 1.8 GHz coupled with an octa-core Mali-450MP. Somehow, Geniatech has designed ATV1866 TV box based on the latter support two HDMI inputs, and one HDMI output. The box does not appears to support video recoding from the HDMI input, nor time-shifting, but the company showcased picture-in-picture (PiP) functionality, showing either input used in full screen or windowed mode on top of the Android user interface. HDMI version is 2.0 for the output, with H.265 codec supported, but I could not find details about the HDMI inputs. The box is running Android 4.4 for now, but will certainly run Android 5.0 at launch. The company is still developing the product, […]

July 21, 2015July 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Remix Mini Android Mini PC Offers a Better Desktop Experience (Crowdfunding)

Android mini PC are great to consume content, but when I tried to blog with one, I found many shortcomings which made it not such as good user experience, and writing articles on an Android mini PC everyday, it would seriously decrease my productivity. That’s probably why Chinese start-up Jide Tech decided to work on Remix OS, based on Android 5.0 but with customizations for a better desktop experience including multitasking support, resizable windows, shortcuts support, a taskbar, and more. The company has now launched a Kickstarter campaign for a low cost mini PC powered by Allwinner A64 and Remix OS. They called it Remix Mini, and dubbed it the “First True Android mini PC”. Two versions are available, one with 1GB RAM + 8GB storage, and one with 2GB + 16GB storage. Specifications: SoC – Allwinner H64 quad core Cortex A53 processor @ 1.2 GHz System Memory – 1 […]

July 19, 2015July 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

ASRock N3150DC-ITX Mini-ITX Motherboard is Powered by a DC Adapter

Last week, I wrote about low cost ASRock Braswell motherboards with pricing starting at just under $60. But there were mainly two complaints about these boards: performance was about the same as similarly priced Bay Trail processors, and the requirements for a large – and relatively expensive – ATX power supply. There’s not much that can be done to improve performance, but ASRock also has launched N3150DC-ITX motherboard powered by a 19V DC adapter. ASRock N3150DC-ITX motherboard specifications: SoC – Intel Celeron N3150 quad core processor @ up to 2.08 GHz with Intel HD Graphics Gen8 @ up to 640 MHz – 6W TDP System Memory – 2x 240-pin DDR3/DDR3L 1600/1066 for up to 16GB RAM Storage – 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug Audio Codec – Realtek ALC892 Audio Codec, 7.1 CH HD Audio Expansion – 1x PCI Express 2.0 x1 Slot, 1x […]