Hardware Category - Page 808 of 1133 - CNX Software

June 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Dreamcade Replay is a Retro Gaming Console Powered by Intel Braswell or Cherry Trail Processor (Crowdfunding)

If you are old enough to have played with Sega or Atari game console, and feel nostalgic about playing retro games, Dream Arcades Inc. plans to launch a vintage gaming console powered by Intel Braswell or Cherry Trail processor, running Windows 10 and preloaded with licensed retro games such as Pacman, Asteroids, Canyon Bomber, Slot Machine, Warlords, and many other. The console also has Sega/Atari ports to be used with your old game controllers. Three main products will be offered: Wireless Arcade Controller, Replay Classic game console, and Replay Mobile arcade machine, with the last two using the same hardware with the following preliminary specifications: SoC – Intel Atom x7-Z8700 Cherry Trail quad core processor, or Intel Celeron J3160 (or other) Braswell quad core processor with Intel HD graphics System Memory – 4GB Storage – 64GB eMMC flash + micro SD and SD slots Video Output – HDMI Display (Arcade […]

June 24, 2016June 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Does Amlogic S905X Support USB 3.0?

Despite Amlogic roadmap claiming none of the upcoming Amlogic TV box SoCs will support USB 3.0, I’ve been informed that Amlogic S905X might already support USB 3.0. So I had a check with NEXBOX A5 TV box. First we can see dwc3 (DesignWare USB3) module is loaded:

lsmod
Module                  Size  Used by
dwc3                   17981  0 
mali                  233433  36

lsmod

Module Size Used by

dwc3 17981 0

mali 233433 36

then this happens when I connect a USB 3.0 hard drive or flash drive:

[ 4812.378262@0] usb 1-2: new high-speed USB device number 7 using xhci-hcd
[ 4812.798557@0] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 4812.801416@0] scsi1 : usb-storage 1-2:1.0

[ 4812.378262@0] usb 1-2: new high-speed USB device number 7 using xhci-hcd

[ 4812.798557@0] usb-storage 1-2:1.0: USB Mass Storage device detected

[ 4812.801416@0] scsi1 : usb-storage 1-2:1.0

The important point here is xhci, which stands for “eXtensible Host Controller Interface” and supports USB 1.x to USB 3.x devices. The next step is to check performance, but since S905X is running Android 6.0, I went through permission issues with both A1SD bench and Disk Speed apps, so I reverted to using dd to read a large file to /dev/null. Result with USB 3.0 hard drive:

dd if=Sintel-Bluray.iso of=/dev/null bs=1024*1024*32                           
47+1 records in
47+1 records out
1593180160 bytes transferred in 42.681 secs (37327620 bytes/sec)

dd if=Sintel-Bluray.iso of=/dev/null bs=1024*1024*32

47+1 records in

47+1 records out

1593180160 bytes transferred in 42.681 secs (37327620 bytes/sec)

That’s about 35.6 MB/s, which would be an excellent USB 2.0 transfer rate, but not quite USB 3.0 material, […]

June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Armtronix AC Powered WiFi Quad Relay Board is Powered by ESP8266 SoC (Crowdfunding)

Armtronix, an Indian startup, has come to kickstarter to launch a quad relay board with an AC terminal based on ESP8266, and the company also offer a complete kit allowing you to build your own wireless power strip with the board. WiFi quad relay board specifications: Wireless module – ESP8266 module 4x Relays to connect four AC/DC loads with terminals offering both MO and NC options “ModeMCU” headers to connect additional sensors such as PIR, IR, Temperature, Humidity, Limit switch etc. USB – micro USB port for programming. Misc – LEDs Power Supply – Terminal with 100-240V AC to 5V DC converter. Dimensions – 145 x 60 x 22 mm. The WiFi Quad Relay Board can be programmed as “MQTT Client” for networking/home automation integration using Arduino IDE, and controlled/ setup with a smartphone running a web browser. Some code is already available on the company’s github account. The crowdfunding […]

June 23, 2016June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Forlinx i.MX6UL Linux Single Board Computer Supports ESAM Embedded Security Control Module

Forlinx Embedded has introduced i.MX6UL single board computer (SBC) based on NXP i.MX 6Ultralite Cortex A7 processor with 512 MB RAM, 8GB storage, that includes two Ethernet interface, an LCD interface, a CAN bus, as well as ESAM (Embedded System Access Module) support via either a SIM card like slot, or a 8-pin DIP chip compatible with ISO7816 standard, and typically used in the financial, telecommunications, transportation sectors for authentication and secure data transfer. Forlinx I.MX6UL board specifications: System-on-module: SoC – NXP i.MX 6Ultralite ARM Cortex A7 processor @ up to 528 MHz with 2D graphics GPU System Memory – 512 MB LvDDR3 memory Storage – 8GB eMMC flash (but hardware manual says 1GB eMMC flash, but also mentioned MTFC8GACAAAM-1M WT so it must 8GB after all…) 2x 80-pin board to board connectors with signals for 2x CAN bus, 2x USB device, 2x SDIO, 2x 10/100M Ethernet, 24-bit RGB, 4x […]

June 23, 2016June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TVPRO HD6 is an Intel Bay Trail mini PC Designed for Video Conference

Intel Atom Z3735F processor has been one of the most popular low power Intel Atom processor, and has been found in tablets, mini PCs, TV sticks running Windows, Android or Linux operating systems. TVPRO HD6 is still marketed as a mini PC, but the form factor is a little different as it includes a high-definition camera, and has been designed to be placed on top of the television to be used as a video conferencing system with Skype, Google Hangout, or other similar applications. TVPRO HD6 specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz / 1.83 GHz with Intel HD graphics System Memory – 2 GB DDR3 Storage – 32 GB eMMC flash + micro SD card slot up to 128GB Video Output – 2x HDMI output Audio – 2x HDMI, 3.5mm headphone jack, 3.5mm microphone jack, dual microphone up to 5 meters range, […]

June 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Get an Early ESP32 Board by Contributing to Luanode for ESP8266 & ESP32 Project (Crowdfunding)

Development boards and module based on Espressif ESP32 dual core processor with WiFi and Bluetooth LE connectivity are due for Q3 or Q4 2016, but you could get an early sample as early as July if you contribute to Jimmy Wu’s (of wifimcu.com) crowdfunding campaign to develop Luanode (Lua SDK) for ESP8266 and ESP32 processors, as ESP32 boards are part of the rewards. Luanode is a Lua SDK for ESP32 and ESP8266 that supports multi-tasking through FreeRTOS, and includes support for peripherals. The source code and documentation can be already be found on Github, and the main differences against something like NodeMCU appear to be multi-tasking and (for now) ESP32 support. Interestingly the SDK contains a tools called WiFi-Killer uses for Denial of Service (DoS) attacks using ESP8266 or ESP32 modules… One hardware project is called WiFi tank comprised of one T300 Tank Chassis, ESP8266 Development Kit, 720p HD Camera, […]

June 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 192 Comments

Shenzhen Tomato X96 Amlogic S905X TV Box is Designed to be “Hooked” Behind Any Monitor or Wall Mounted

There are several solutions to mount a mini computer or TV box behind a display, and while VESA mount is one of them, your TV may not support it, so Shenzhen Tomato has come up with “magic tape” combined with an IR extension cable to help you hook their latest X96 TV box behind your TV. Let’s go through the main specifications first: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz/2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 (option: 2GB) Storage – 8GB eMMC flash (option: 16GB) + micro SD card slot up to 64GB Video Output – HDMI 2.0a up to 4K @ 60 Hz, and AV port (composite video) Audio Output – HDMI, optical S/PDIF, AV port (stereo audio) Video Codecs – 4K VP9 @ 60 fps, 4K 10-bit H.265 @ 60 fps, 4K H.264 up to 30 fps Connectivity […]

June 22, 2016August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Espressif ESP8285 is just like ESP8266 but with 1MB built-in Flash, and Designed for Wearables

Espressif announced ESP8285 WiFi SoC was entering production last March. The new processor is based on ESP8266, but the company added 1MB built-in flash to make the solution smaller, and more suitable to wearables such as smartwatches and activity trackers. ESP8285 features a Tensilica L106 32-bit MCU and another ultra-low-power 16-bit RISC core, as well as 802.11 b/g/n/d/e/i/k/r WiFi connectivity. AI Thinker has already produced a tiny module based on the solution, called ESP-8285, and another person has developed an ESP8285 development board sold on Tindie for $24.95, and with some code sample (Arduino sketches) on Github. You’ll also find some more technical information on a Devacron blog post, or inside the datasheet on Espressif website. Via Hackaday Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later […]