Hardware Category - Page 781 of 1133 - CNX Software

September 20, 2016September 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Amlogic S905L Processor Drops VP9 Codec, TS Inputs for Tuners, and the Camera Interface

[Update: I’ve received updated documentation for Amlogic S905X too, and the main differences are only the lack of VP9 codec, and HDMI 2.0b interface] Amlogic has apparently decided to launch yet another quad core Cortex A53 processor with Amlogic S905L, which appears to be based on Amlogic S905X with built-in stereo audio codec and 10/100M Ethernet PHY & MAC, HDR support, but without VP9 codec, camera interface, nor TS inputs, so it looks like a cost-down version purely designed for OTT/IP TV boxes. The document I have is dated June 2016, before the 1.5 GHz “limit” was discovered on Amlogic processors, and the maximum frequency is rated @ 2.0 GHz in the document. Amlogic S905L specifications (based on S905L Quick Referent Manual): CPU – Quad core ARM Cortex-A53 CPU up to 2GHz (DVFS) with Neon and Crypto extensions, unified L2 cache 3D GPU – Penta-core ARM Mali-450 GPU up to […]

September 19, 2016January 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S905 vs Amlogic S912 Benchmarks Comparison

Amlogic has unveiled three new processors this year with Amlogic S905X, S912 and S905D. The latter is not found in devices yet, we’ve seen Amlogic S905X is a bit slower than Amlogic S905, but surely Amlogic S912 with eight Cortex A53 cores and its “multi-core high performance 3D GPU”, namely ARM Mali-T820MP3 must deliver a significant boost in performance. I now have full benchmarks results for two devices: M12N MXQ Plus and Qintaix Q912. M12N is the fastest devices of the two according to benchmarks, and I’ve been told YokaTV KB2 has about the same Antutu score (41K points) as M12N, so I feel confident enough that we have relevant benchmark’s results to compare Amlogic S912 and Amlogic S905 performance using M12N (MXQ Plus) and MINIX NEO U1 TV boxes. The comparison table below contains scores for Antutu 6.x, Vellamo 3.x, and 3DMark Ice Storm Extreme. MINI NEO U1 runs […]

September 19, 2016September 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

Orange Pi One Development Board Sells for $3.69 Shipped (Promo)

[Update: Sorry the promo is over, and price is back at $13.79] Last time, we had a promo for Orange Pi PC for $8.57 on GearBest, and it was legit, but quantity limited, so not so easy to get. There’s now another promo from the same parent company, as Orange Pi One is sold for $3.69 including shipping on Everbuying with 289 pieces and about 8 days left. In case you can’t recall Orange Pi One specs, it’s a development board based on Allwinner H3 quad core Cortex A7 SoC, with 512 MB RAM, micro SD card for storage, 10/100M Ethernet, a USB ports, and HDMI output. The best Linux OS for the board is probably Armbian. The normal price is around $13 to $14 shipped. Thanks to Theguyuk for the tip. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a […]

September 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Sonoff TH10/16 WiFi Relays Support Temperature and Humidity Probes

Sonoff are dirt cheap WiFi AC/DC relay systems based on ESP8266 selling for about $5 with board and case. They are made by ITEAD Studio, and the company has now new versions supporting up to 16A @ 250V, and with a 2.5mm connector to connect external temperature and humidity probes. Two models are available Sonoff-TH10 (10A max) and Sonoff-TH16 (16A max) with the following specifications: SoC – Espressif ESP8266 Tensila L106 32-bit MCU up to 80/160 MHz with WiFi Connectivity – 802.11 b/g/n WiFi with WPA/WPA2 support Relay Sonoff-TH10 – HK3FF-DC5V-SHG supporting 90 to 250 VAC input, up to 10A (2200 Watts) Sonoff-TH16 – Hongfa HF152F-T supporting 90 to 250 VAC input, up to 16A (3500 Watts) Terminals – 6 terminal for mains and load’s ground, live and neutral signals. Misc – 4-pin 2.5mm jack for external probes, LEDs for power and WiFi status Dimensions – PCB: 89.1 x 45.0 […]

September 19, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Android 7.0, Android TV 7.0, and Yocto Project Ported to Pine A64 Boards

A few weeks ago, Raspberry Pi 3 got an Android 7.0 Nougat port, and it’s usable for some app even simple games like Angry Bird, but there are still problems with 3D graphics, and hardware video decoding. But thanks to Pine64 forum’s member Ayufan, we now have Android 7.0 and Android TV 7.0 for Pine A64 boards with 1GB or more memory with 3D graphics, and hardware video acceleration for most apps. Everything is said to pretty much work, but there are some known issues, such as camera support (being worked on now), touchscreen support (not tested), YouTube is limited to 360p/480p as it does not support hardware video decoding, and Widevine DRM is not supported. Android 7.0 has also been shown to be about 10 to 15% faster than Android 5.1.1 in GeekBench. Ronnie Bailey has shot a video showing Pine A64 running Android TV 7.0 Nougat. If you […]

September 18, 2016November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Qintaix Q912 Android Box Review – Part 2: Android 6.0, Kodi 17, Benchmarks, etc…

Qintaix Q912 is one of the many octa-core Android boxes based on Amlogic S912 processor. I’ve already shown photos of the device and its internal design in the first part of Qintaix Q912 review, so today I’ll report the results of my testing with Android firmware, video & audio capabilities in Kodi 17 Alpha 3 (pre-installed), features supports, benchmarks, and other comment. I will also be interesting to find out how it compares to M12N TV box, also based on Amlogic S912 processor. First Boot, Settings, and First Impressions I’ve connected all necessary cables including HDMI and Ethernet, added some USB devices including two 2.4 GHZ USB dongles for my air moues and wireless gamepad, a USB keyboard to take screenshots, and a USB 3.0 hard drive to the USB 2.0 ports of the device. Once you apply power, the LED is turn red, and you need to press the […]

September 17, 2016September 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Nextcloud Box is a $80 Private Cloud Server with 1TB HDD for Development Boards

While there are plenty of cloud services provided by companies such as Dropbox or Google, you may want to manage you own private cloud server instead for performance and/or privacy reasons. One typical way to do this is to install Owncloud or Nextcloud (a fork of Owncloud), on a Linux computer or board such as Raspberry Pi 3. The former is usually a little expensive for just this task, the latter often results in cable mess, and in both case, some people may not be comfortable with setting it all up. Nextcloud, Western Digital, and Canonical seems to have addressed most of those issues with Nextcloud Box including a 1TB USB 3.0 WDLabs harddrive, Nextcloud case with space for the drive and small ARM or x86 Linux development boards, and a micro USB power supply. The kit also include a micro SD card pre-loaded with Snappy Ubuntu Core, Apache, MySQL […]

September 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Kodi 17 Setup and Audio/Video Support in Amlogic S912 TV Boxes (as of September 2016)

Most people installing Kodi are going to select Kodi 16.1 as of today, since it is the latest stable release. But I’m currently reviewing Qintaix Q912 TV box based on Amlogic S912 octa-core processor, whose Android 6.0 firmware includes Kodi 17 Alpha 3, so since that’s the first time I run Kodi 17 “Krypton”. I’ve decided to report my experience about the interface, and the current status about audio and video support by testing some 4K videos, and audio files. I used the latest available firmware for the test. Kodi 17 can be found on the main launcher, and for the first launch, we’ll see the default skin has been replaced from Confluence to the new Estuary skin. It’s a little confusing a first. We can access the setup menu by going to the icon on the bottom left, just on the right on the power button, and then select […]